YarisAUDIORHD installation instructions

Model year: 2005

Vehicle code: **P90R-****KW

Part number: • CD-Changer: 08601-00911• Subwoofer: 08691-00834

Manual ref. no: AIM 000 481-01

Yaris (RHD) - 202-07

Yaris AUDIO

Rev. Nr.Rev. No

No. version

DatumDateDate

SeitePagePage

AbbildungPictureImage

AktualisierungUpdate

Mise à jour

NeuNew

Nouveau

Gelöschte SchritteDeleted steps

Etapes supprimées

1 02-07 5Application

ChartApplication

Chart Europe

1 02-07 6Application

ChartApplicationChart Japan

X

1 02-07 9 Step 7 - 8 X

1 02-07 12 Step 8 - 9 X

1 02-07 13 Step 10 - 11 X

1 02-07 14 Step 12 - 13 X

Revision Record

Yaris (RHD) - 3 02-07

Yaris AUDIO

PRECAUTIONS

PLEASE READ THOROUGHLY THESE PRECAUTIONS BEFORE THE INSTALLATION .

• Do not pinch the rear wiring or harness in the tightened part.

• Be sure to disconnect the nega-tive (-) lead from the battery ter-minals.

• When passing the wires throughthe dashboard or other panels,use a grommet to ensure water-proofing.

• Protect the wiring with tapewhen it is passed through a hole.

• When disconnecting the con-nectors, be sure to grip the con-nector body. Do not tug on thewiring.

• Do not forcibly pull any carwiring harness. Rough tuggingmay result in opened connec-tions, or a broken wire or har-ness.

• Confirm that lamps, horn, wiperand other car accessories operatenormally.

• Protect your car with fendercovers, seat and so on.

• Use the correct tool whentightening bolts or nuts.

• Before drilling a hole, checkthat the rear of the mount-ing wall is clear.

• Be sure to firmly tight-en connectors and ter-minals.

• Before connecting thepower wiring to the battery,check the wiring con-nections, harness, etc. to seethat they are properlysecured.

• Check body and trim near area of installation to be certain no dirt or scratches resulted from the installa-tion.

waterproof - O.K. !!

Taping

Grommet

Insert completely

Stop it !

Yaris (RHD) - 402-07

Yaris AUDIO

Revision Record ................................................................................................................................ 2

Precautions ........................................................................................................................................ 3

Application Chart Europe production ............................................................................................ 5

Application Chart Japan production ................................................................................................ 6

AUDIO Installation Instructions

• Vehicle Disassembly .................................................................................................................. 7

• CD-Changer Installation ..........................................................................................................10

• Subwoofer Installation ..............................................................................................................15

TABLE OF CONTENTS

Yaris (RHD) - 5 02-07

Yaris AUDIO

APPLICATION CHART EUROPE PRODUCTION

Yaris (RHD) - 602-07

Yaris AUDIO

APPLICATION CHART JAPAN PRODUCTION

Yaris (RHD) - 7 02-07

Yaris AUDIO

VEHICLE DISASSEMBLY

2. Remove the center cluster panel (L) and (R) .

: Clip (6x)

: Hook (8x)

5

5

Fig. 1

1. Put protective tape on the shaded areas.

Be sure to remove the parts carefully so you do not damage the panels.

CAUTION

3.

a) Put protective tape on the shaded areas.

b) Remove the meter cluster panel .

: Clip (5x)

: Hook (4x)

8

Fig. 3

8

Be sure to remove the parts carefully so you do not damage the panels.

CAUTION

Fig. 2

5

Yaris (RHD) - 802-07

Yaris AUDIO

5. Remove the scuff plate and the cowlside trim on the driver’s side.

: Clip (1x) (Cowl side trim)

: Hook (1x) (Cowl side trim)

: Clip (2x) (Scuff plate)

: Hook (2x) (Scuff plate)

13

10

6. Remove the driver’s seat .

: Bolt (4x)108

15

Fig. 6

15 108

Fasten the bolts with specified torque(37 Nm) when reassembling.

CAUTION

4. Remove the audio unit .

: Clip (4x)

: Screw (4x)100

9

Fig. 4

100

9

FOR EUROPE PRODUCTION

Fig. 5

10

13

Yaris (RHD) - 9 02-07

Yaris AUDIO

7. Remove the scuff plate and the cowlside trim on the passenger’s side.

: Clip (1x) (Cowl side trim)

: Hook (1x) (Cowl side trim)

: Clip (2x) (Scuff plate)

: Hook (2x) (Scuff plate)

13

10

8. Remove the passenger’s seat .

: Bolt (4x)108

15

Fig. 8

15108

Fasten the bolts with specified torque(37 Nm) when reassembling.

CAUTION

FOR JAPAN PRODUCTION

Fig. 7

10

13

Yaris (RHD) - 1002-07

Yaris AUDIO

1. Cut one tape into ten pieces andanother tape into six as shown in thepicture.

• : Component part of CD changer kit15

15

Fig. 1

2.

a) Route the changer wire by using thetape pieces.

b) Connect the changer wire harness tothe audio unit by using the AVC-LANconversion wire 08695-000370.

9

28

15

28

Fig. 2

15

28

CD-CHANGER INSTALLATION

9

6x

10x

08695-00370FOR EUROPE PRODUCTION

3. Unscrew and pull forward to remove thefuel lid opener .

: Screw (1x)102

14

Fig. 8

14

102

Yaris (RHD) - 11 02-07

Yaris AUDIO

09-05

4. Cut the floor carpet.

50mm

20mm

50mm

170mm

20m

m

Fig. 4

5. Route the changer wire . Bundleexcess wire and tape with the large tape as shown by going through thehole of the cross member near the door.

15

28

6. Replace the carpet and pull through thechanger wire . Install the bracket to the floor.

: Bolt (2x)

• : Component part of audio mounting kit PZ425-B0220-60103

103

1228

Fig. 5

28

Excess wire

15

Hole

Fig. 6

103

12

28

Yaris (RHD) - 1202-07

Yaris AUDIO

7.

a) Install the changer unit to the brack-et .

b) Connect the changer wire to thechanger unit .

: Screw (4x)

• : Component part of CD changer kit104

104

18

28

12

18

FOR JAPAN PRODUCTION

8.

a) Turn the floor carpet with felt.

b) Route and tape the subwoofer wire with tapes .15

28

9. Cut the carpet with felt as shown in the illustration.

270mm

160mm

60mm

80mm80

Fig. 9

Fig. 7

104

12

18

28

Fig. 8

15

28

Excess wireFloor carpet

Yaris (RHD) - 13 02-07

Yaris AUDIO

Fig. 10

17 131 17

13

15

1

17

10. Attach the spacers and the tapes to the base bracket .

: Screw (M5x10) (4x): Spacer with nut (4x): Tape (2x)1

17

15

13

117

11. Attach the base bracket to the floorand fold back the cut parts of the carpet

.14

3

Fig. 11

14

3

Yaris (RHD) - 1402-07

Yaris AUDIO

Re-assembly.Replace all removed parts and panels. Be sure all panel clips and connectors are proper-ly engaged.

12. Install the side brackets to the chang-er unit .

: Side bracket (2x)

: Flat head screw (M5x8) (4x)103

6

7

6

Fig. 12

7

Hole position on theleft side (�)

Hole position on theright side (�)

6

6

103

Screw

13. Install the changer unit .

a) Connect the changer wire to thechanger unit .

b) Then install the changer unit to thebase bracket .

: Screw (M5x10) (2x)104

3

7

7

2

7

Fig. 13

3

2

104

7

14

3

Yaris (RHD) - 15 02-07

Yaris AUDIO

3.

a) Put protective tape on the shaded areas.

b) Remove the meter cluster panel .

: Clip (5x)

: Hook (4x)

8

Fig. 3

8

Be sure to remove the parts carefully so you do not damage the panels.

CAUTION

SUBWOOFER INSTALLATION

2. Remove the center cluster panel (L) and (R)

: Clip (6x)

: Hook (8x)

5

5

1. Put protective tape on the shaded areas.

Be sure to remove the parts carefully so you do not damage the panels.

CAUTION

Fig. 1

Fig. 2

5

Yaris (RHD) - 1602-07

Yaris AUDIO

4. Remove the audio unit .

: Clip (4x)

: Screw (4x)100

9

Fig. 4

100

9

5. Remove the scuff plate and the cowlside trim on the passenger’s side.

: Clip (1x) (Cowl side trim)

: Hook (1x) (Cowl side trim)

: Clip (2x) (Scuff plate)

: Hook (2x) (Scuff plate)

13

10

6. Remove the passenger’s seat .

: Bolt (4x)108

15

Fig. 6

15108

Fasten the bolts with specified torque(37 Nm) when reassembling.

CAUTION

Fig. 5

10

13

Yaris (RHD) - 17 02-07

Yaris AUDIO

7. Fit brackets to the subwoofer .

: Screw with washer (4x)

• : Component part of audio mountingkit PZ425-B0221-60

• : Component part of subwoofer kit27

26

105

242726

Fig. 7

8. Cut the carpet with felt as shown in the illustration.

130mm

130mm

100mm

100

60mm

60mm20mm

60mm

Fig. 8

10526

24

27

9. Cut one tape in ten pieces.

• : Component part of subwoofer kit15

15

Fig. 9

15

10x

Yaris (RHD) - 1802-07

Yaris AUDIO

10.

a) Turn the floor carpet with felt.

b) Route and tape the subwoofer wire with tapes .15

28

11. Connect the subwoofer wire harness to the 10P audio connector of the vehi-cle wire harness and to the audio unit

.9

28

12. Before installing the subwoofer adjust the HIGH CUT and GAIN to thecorrect position.

24

HIGH CUT

HIGH CUT GAIN

GAIN

Fig. 12

24

Fig. 10

15

28

Excess wireFloor carpet

Fig. 11

10P Audio connector928

Yaris (RHD) - 19 02-07

Yaris AUDIO

13.

a) Replace the floor carpet with felt.

b) Fit the base bracket to the floor using

adhesive tape .

• : Component part of audio mountingkit PZ425-B0221-60

25

25

26

Fig. 13

25

2824

26

14. Mount the subwoofer as shown inthe illustration and connect the sub-woofer wire to the subwoofer .2428

24

32mm

36mm

100mm

55mm

Fig. 14

24

28

Re-assembly.Replace all removed parts and panels. Be sure all panel clips and connectors are proper-ly engaged.

Rattling noises might be heard whenthere’s something in the tray under theseat.

NOTE

GENUINE PARTS