Prokosch Pumpen und Armaturen Prokosch Pumpen und Armaturen GmbH • In der Breitwiese 9 • 76684 Östringen • Deutschland www.prokosch.de • [email protected] • Fon +49 (0)7259 9103 0 • Fax +49 (0)7259 9103 49
Solids Flow Control With PROKOSCH Valves
Pneumatically actuated PROKOSCH Ball Valve
Pneumatically actuated PROKOSCH Pinch Valve
PROKOSCH Injector for Pneumatic Conveying
LeBlansch Bulkhandling Equipment B.V. [email protected] - 0031 (0)229 820 236
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsFlange Ball Valve 400
PROKOSCH Flange Ball Valve No. 400
Installation length per EN 558-1 - Flanges per DIN 2501
Prokosch 400-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 50 to 100 available in all material combinations.Nominal size 125 and 150 not available in material combination 5.
"PTFE/special casing" design with self-adjusting seal system for a permanent fitting seal. Particularly suitable for fluids such as mineral oils. Standard production O-rings made of FPM or lower priced buna-N.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"Stainless steel/O-ring spring-mounted" design with metallic seal system for a long tool life when using abrasive materials.
Standard design with manual lever. "SO" design set up for automation.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
Nom.width
DN
Bore Nom.press.
PN L D K dxi H R SW 5 3,4 1,2,6,7,10
8,9
Approx.
weight
(kg)Dimensions
50 50 16 150 165 125 18x4 130 250 17 3,8 4,5 9,3 4,5
65 64 16 170 185 145 18x4 140 270 19 5,0 7,5 13,7 8,0
80 78 16 180 200 160 18x8 150 270 19 7,0 9,0 17,0 9,5
100 97 16 190 220 180 18x8 175 330 27 11,3 14,2 28,5 16,0
125 122 16 200 250 210 18x8 200 300/600
27 --- 26,5 42,0 27,5
150 150 16 350 285 240 22x8 250 600 35 --- 43,3 81,5 44,3
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsBall Valve 410
PROKOSCH Ball Valve No. 410
Side one flange per DIN 2501, side two male pipe thread per DIN 259
Prokosch 410-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 50 to 100 available in all material combinations.
"PTFE/special casing" design with self-adjusting seal system for a permanent fitting seal. Particularly suitable for fluids such as mineral oils. Standard production O-rings made of FPM or lower priced buna-N.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"Stainless steel/O-ring spring-mounted" design with metallic seal system for a long tool life when using abrasive materials.
Standard design with manual lever. "SO" design set up for automation.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
Nom.width
DN
LW Nom.press.
PN L D K dxi t H R G SW 5 3,4 1,2,6,7,10
8,9
Approx.
weight
(kg)Dimensions
502"
50 16 144 165 125 18x4 20 130 250 R2" 17 2,9 3,9 7,3 3,9
6521/2"
64 16 163 185 145 18x4 20 140 270 R21/2" 19 5,0 6,5 11,3 6,9
803"
78 16 180 200 160 18x8 24 150 270 R3" 19 6,0 8,0 14,3 8,6
1004"
97 16 200 220 180 18x8 25 175 330 R4" 27 10,2 13,9 25,0 14,3
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsFlange Ball Valve 420
PROKOSCH Ball Valve for Tank Trucks No. 420
Dual-sided flange per DIN 28480
Prokosch 420-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 50 to 100 available in all material combinations.
"PTFE/special casing" design with self-adjusting seal system for a permanent fitting seal. Particularly suitable for fluids such as mineral oils. Standard production O-rings made of FPM or lower priced buna-N.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"Stainless steel/O-ring spring-mounted" design with metallic seal system for a long tool life when using abrasive materials.
Standard design with manual lever. "SO" design set up for automation.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
Nom.width
DN
Bore Nom.press.
PN L D K dxi H R SW 5 3,4 1,2,6,7,10
8,9
Approx.
weight
(kg)Dimensions
50 50 10 142 154 130 11,5x8 130 250 17 3,5 4,3 8,1 4,5
65 64 10 160 154 130 11,5x8 140 270 19 5,0 6,5 11,2 6,9
80K 78 10 140 154 130 11,5x8 150 270 19 5,2 7,4 12,8 8,0
80L 78 10 168 154 130 11,5x8 150 270 19 5,6 7,8 13,5 8,4
100 97 10 180 174 150 14,0x8 175 330 27 9,2 13,2 22,5 14,2
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsBall Valve 430
PROKOSCH Ball Valve for Tank Trucks No. 430
Side one flange per DIN 28480, side two male pipe thread per DIN 259
Prokosch 430-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 50 to 100 available in all material combinations.
"PTFE/special casing" design with self-adjusting seal system for a permanent fitting seal. Particularly suitable for fluids such as mineral oils. Standard production O-rings made of FPM or lower priced buna-N.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"Stainless steel/O-ring spring-mounted" design with metallic seal system for a long tool life when using abrasive materials.
Standard design with manual lever. "SO" design set up for automation.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
L D K dxi t H R G SW 5 3,4 1,2,6,7,10
8,9
Approx.
weight
(kg)Dimensions
502"
50 10 140 154 130 11,5x8 20 130 250 R2" 17 2,9 3,7 6,7 3,9
652 1/2"
64 10 158 154 130 11,5x8 20 140 270 R2 1/2" 19 4,5 6,0 9,9 6,4
803"
78 10 160 154 130 11,5x8 24 150 270 R3" 19 5,2 7,3 12,5 7,9
1004"
97 10 195 174 150 14,0x8 25 175 330 R4" 27 8,9 13,3 22,3 14,2
Nom.width
DN
LW Nom.press.
PN
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsBall Valve 440
PROKOSCH Ball Valve No. 440
Dual-sided male pipe thread per DIN 259
Prokosch 440-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 50 to 100 available in all material combinations.
"PTFE/special casing" design with self-adjusting seal system for a permanent fitting seal. Particularly suitable for fluids such as mineral oils. Standard production O-rings made of FPM or lower priced buna-N.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"Stainless steel/O-ring spring-mounted" design with metallic seal system for a long tool life when using abrasive materials.
Standard design with manual lever. "SO" design set up for automation.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
L H R t G SW 5 3,4 1,2,6,7,10
8,9
Approx.
weight
(kg)Dimensions
2" 50 16 138 130 250 20 R2" 17 2,0 2,8 5,2 3,0
3" 78 16 180 150 270 24 R3" 19 4,9 7,0 11,2 7,6
4" 97 16 210 175 330 25 R4" 27 8,2 12,4 21,3 13,6
21/2" 64 16 156 140 270 20 R21/2" 19 3,9 5,4 8,8 5,8
Nom.width
DN
LW Nom.press
PN
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsBall Valve 450
PROKOSCH Ball Valve No. 450
Dual-sided female pipe thread per DIN 259
Prokosch 450-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 40 only available in material combination 5Nominal size 50 to 100 available in all material combinations.
"PTFE/special casing" design with self-adjusting seal system for a permanent fitting seal. Particularly suitable for fluids such as mineral oils. Standard production O-rings made of FPM or lower priced buna-N.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"Stainless steel/O-ring spring-mounted" design with metallic seal system for a long tool life when using abrasive materials.
Standard design with manual lever. "SO" design set up for automation.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
L H R t G SW 5 3,4 1,2,6,7,10
8,9
Approx.
weight
(kg)Dimensions
11/2" 39 16 130 120 250 22 R11/2" 17 1,9 --- --- ---
2" 50 16 145 130 250 23 R2" 17 2,3 3,3 5,9 3,5
21/2" 64 16 165 140 270 25 R21/2" 19 4,0 5,5 8,8 6,0
3" 78 16 195 150 270 28 R3" 19 5,3 7,4 12,5 8,0
4" 97 16 220 175 330 30 R4" 27 8,8 13,0 23,0 13,9
Nom.width
DN
LW Nom.press.
PN
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsBall Valve 460
PROKOSCH Ball Valve No. 460
Side one male pipe thread per DIN 259, side two female pipe thread per DIN 259
Prokosch 460-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 50 to 100 available in all material combinations.
"PTFE/special casing" design with self-adjusting seal system for a permanent fitting seal. Particularly suitable for fluids such as mineral oils. Standard production O-rings made of FPM or lower priced buna-N.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"Stainless steel/O-ring spring-mounted" design with metallic seal system for a long tool life when using abrasive materials.
Standard design with manual lever. "SO" design set up for automation.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
L H R t1 t2 G1 G2 SW 5 3,4 1,2,67,10
8,9
Approx.
weight
(kg)Dimensions
2" 50 16 141 130 250 20 23 R2" R2" 17 2,4 3,2 5,7 3,4
21/2" 64 16 160 140 270 20 25 R21/2" R21/2" 19 4,0 5,5 8,8 6,0
3" 78 16 187 150 270 24 28 R3" R3" 19 5,0 7,1 11,7 7,7
4" 97 16 216 175 330 25 30 R4" R4" 27 8,9 12,7 22,3 13,9
Nom.width
DN
LW Nom.press.
PN
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsBall Valve with Injector 470
PROKOSCH ball valve with Injector for accelareted material flow No. 470
Side one flange per DIN 28460, side two male pipe thread per DIN 259, air supply male pipe thread per DIN 259
Prokosch 470-series ball valves use fewer individual parts, have space-saving elements, are based on a practical modular principle and are easy to switch. The free cylindrical pass reduces flow resistance to a minimum and the dual-sided bearing configuration of the ball ensures a uniformly low switching torque throughout the entire pressure region.
Nominal size 80 and 100 available in material combinations 2, 4, 7 and 9.
"PTFE/O-ring spring-mounted" design with strong seal system, developed specifically for use with powdered and granular goods.
"FA" design with aerodynamic jam-free discharge flange for use with media that easily clog the fitting.
Special designs regarding material and design are available upon request.
L D K dxi t H R G1 G2 SW 4 2,7 9
Approx. weight (kg)Dimensions
80 78 10 245 154 130 11,5x8 24 150 270 R3" R11/2" 19 11,6 15,0 12,3
100 97 10 283 174 150 14,0x8 24 175 330 R4" R2" 27 19,5 26,5 20,8
Nom.width
DN
LW Nom.press.
PN
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
LG3 t2
t1
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsInjector 360
PROKOSCH Injector No. 360
Einerseits Rohr-Aussengewinde nach DIN 259, andererseits Rohr-Innengewinde nach DIN 259.
Prokosch-Ringdüsen zum Beschleunigen der Förderung von pulverisierten und granulierten Gütern. Einbau mittels Gewinde direkt in die Förderleitung. Einbringung der Förderluft mittels seitlichem Anschlussstutzen.
Lieferbar für 3" und 4" Rohrleitungen (DN 80, DN 100).
Gehäuse aus Grauguss. Düse aus Stahl, auf Wunsch auch in Edelstahl lieferbar.
ca. Gewicht (kg)Baumasse
803"
1004"
10
10
L G1 G2 G3 t1 t2
105
135
R 3"IG
R 4" IG
R 3"AG
R 4"AG
R 1 1/2" AG
R 2"AG
24 24
28 28
Nenn-grösse
DN
LW Nenn-druck
PN
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
M14x1,5
Ld
x
i
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsPinch Valve 500
PROKOSCH Pinch Valve No. 500
Dual-sided flange per DIN 2501.
The pneumatically activated PROKOSCH 500-series pinch valves were designed specifically for use in silo trucks. They are known for their strength, fewer individual parts and space-saving elements as well as their maintenance-free design. The free cylindical pass reduces flow resistance to a minimum.
Body mady of a light alloy with generously dimensioned wall thickness. Flanges made of standard gray cast iron material.Each body is subjected to a burst test at 24 bar at the plant.
Long service life due to highly abrasion-resistant sleeve made of NBR/SBR, fabric-reinforced and free cylindrical pass.
Sleeve can also be provided in white food-substance quality and stainless steel flanges.
Special designs regarding material and design are available upon request.
Can be dismanteled without special tools.
Weight
(kg)Dimensions Air
pressureAir
volume
valve
closed
(l)
50 47 205 165 125 18x4 64
65 62 205 185 145 18x4 74
5 - 6 bar
5 - 6 bar
3,3
4,7
DN LW L D K dxi H
Nom.width
80 78 225 200 160 18x8 81 5 - 6 bar 6,1
100 97 280 220
180 18x8 91 5 -
6
bar 7,9
1,1
1,6
2,1
3,0
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
roductsPinch Valve 520
PROKOSCH Pinch Valve No. 520
Dual-sided flange per DIN 28460.
The pneumatically activated PROKOSCH 520-series pinch valves were designed specifically for use in silo trucks. They are known for their strength, fewer individual parts and space-saving elements as well as their maintenance-free design. The free cylindical pass reduces flow resistance to a minimum.
Body mady of a light alloy with generously dimensioned wall thickness. Flanges made of standard gray cast iron material.Each body is subjected to a burst test at 24 bar at the plant.
Long service life due to highly abrasion-resistant sleeve made of NBR/SBR, fabric-reinforced and free cylindrical pass.
Sleeve can also be provided in white food-substance quality and stainless steel flanges.
Special designs regarding material and design are available upon request.
Can be dismanteled without special tools.
weight (kg)Dimensions Air pressure
80 78 280 154 130 M10x8 81
100 97 280 174 150 M12x8 91
5 - 6 bar
5 - 6 bar
6,1
7,2
DN LW L D K dxi H
Nom.width
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.
Type No.
Nominal Width
Material Combination
SO=Prepared for Drive Setup
FA=Free Runout (Jam-Free Design)
Prokosch - Pumpen und Armaturen GmbH • In der Breitwiese 9 D-76684 Östringen-OdenheimTel +49(0)7259-9103-0 • Fax +49(0)7259-9103-49 • [email protected] • www.prokosch-valves.com
•
Order Code
Table of Material Combinations
1="Special casing" design with backup ring 2="O-ring spring mounted" design 3=Hard chrome plated
Example:
Metallic-sealed flange ball valve prepared for drive setup and free runout using DIN flanges (400 series) in nominal width 65: 400/65/10/SO/FA
The Teflon/buna-N design is spring-mounted with an O-ring and particularly suitable for granular or powdered media. For use with high temperatures, this model is also available with Viton O-rings.
The stainless steel/Viton design is spring-mounted with an O-ring and particularly suitable for abrasive, granular and powdered media.
No.
1
2
3
4
56
7
8
910
Body+Flanges
Gray Cast Iron
Gray Cast Iron
Aluminium Alloy
Aluminium Alloy
Aluminium AlloyGray Cast Iron
Gray Cast Iron
Aluminium Alloy
Aluminium Alloy
Gray Cast Iron
Ball3
Gray Cast Iron3
Gray Cast Iron3Gray Cast Iron3Gray Cast Iron
Aluminium AlloyStainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Liners1
Teflon2
Teflon1Teflon2Teflon2Teflon1Teflon2Teflon1Teflon2Teflon
Stainless Steel
O-rings
Viton
Buna-NViton
Buna-N
Buna-NViton
Buna-N
Viton
Buna-N
Viton
PROVEN & RELIABLE
FOR USE IN:
INDUSTRIAL
FUEL HANDLING
BULK HANDLING
TANK TRUCK CONSTR.
SILO TRUCK CONSTR.