MON 02 Schaeffler KG · Geschäftsbereich Lineartechnik
APLSE
D Montage■ Führungswagen an Schienenende fahren
und Schmiernippel aus Kopfstück entfernen.
■ Blechabstreifer APLSE vor Standard-abstreifer setzen und mit Schmieradapter anschrauben , , .
Zentrierzapfen müssen in den Bohrungen des Blechabstreifers sitzen.Nur mitgelieferte Schraube verwenden.
Werden mehrere Wagen auf einer Schiene ausgerüstet, möglichst Montageschiene verwenden.
1
2
3
4 8
7 9 10
5
6
10
1
2
126
781
3
56
4
78
910
1,5 Nm
126
783
mon_02_deu_usa.book Seite 1 Montag, 8. Mai 2006 10:39 10
MATNR 007592060-0000/MON 02 2sp. D-GB 050610 · Printed in Germany Schaeffler KG · Linear Technology Division
APLSE
� Installation■ Slide carriage to the end of the rail and
remove lubrication nipple from the end piece.
■ Place sheet steel wiper APLSE in front of the standard wiper and bolt it to the lubrication adapter using parts , , .
Centering bolts must be in the bores of the sheet steel wiper.Only the bolt supplied in the delivery should be used.
If a rail is to be equipped with several carriages, a guideway piece should be used for mounting purposes if possible.
1
2
3
4
8 7 9 10
5 6
10
1
2
126
781
3
56
4
78
910
1,5 Nm
126
783
mon_02_deu_usa.book Seite 1 Montag, 8. Mai 2006 10:39 10