INGENIEURGESELLSCHAFT FÜR WASSER- UND ABFALLWIRTSCHAFT MBH
PROF. DR.- ING. W. HARTUNG + PARTNER BERATUNG – GUTACHTEN – PLANUNG –
BAUÜBERWACHUNG
Waste management/treatment concept solution for fresh- and old-waste
Braunschweig, 15.02.2010
Index
1. Prof. Dr.- Ing. W. Hartung + Partner
2 Reasons for advance waste management
3. Prof. Dr.- Ing. W. Hartung + Partner – waste management solution
4. Prof. Dr.- Ing. W. Hartung + Partner – references
5. Clean Development Mechanism – waste management solution
1. Prof. Dr.- Ing. W. Hartung + Partner
• Over 30 years of experience in waste related projects;
• Experience in domestic and industrial waste;
• Over 250 projects in waste management in more then 20 countries;
• Services in consulting, planning, construction phase and training;
• State-of-the-art technique and technology solutions;
• Active participant in academic work, seminars, research and book writing*.
* Long-term hazard to drinking water resources from landfills, 2009, Peter Spillmann, Timo Dörrie and Michael Struve, publish by Thomas Telford
Index
1. Prof. Dr.- Ing. W. Hartung + Partner
2 Reasons for advance waste management
3. Prof. Dr.- Ing. W. Hartung + Partner – waste management solution
4. Prof. Dr.- Ing. W. Hartung + Partner – references
5. Clean Development Mechanism – waste management solution
2. Reasons for advance waste management
“Waste is value!”
• City- and wild-environment protection;
• Ground and drinking water protection;
• Recovery/treatment of land;
• Energy recovery/production;
• Separation/extraction of valuable materials;
• Creation of social awareness, employment and investment.
Index
1. Prof. Dr.- Ing. W. Hartung + Partner
2 Reasons for advance waste management
3. Prof. Dr.- Ing. W. Hartung + Partner – waste management solution
4. Prof. Dr.- Ing. W. Hartung + Partner – references
5. Clean Development Mechanism – waste management solution
2. Prof. Dr.- Ing. W. Hartung + Partner – waste management solution
Old-waste solution Fresh-waste solution
Preliminary exploration of the waste body
Feasibility study and safety concept
Biological conversion (stabilization)Fresh-waste (domestic and medical)
collection and transport
Excavation of waste body and material extraction
1st part
2.1
2.2
2.3
2.4
2.5
2. Prof. Dr.- Ing. W. Hartung + Partner – waste management solution
Old-waste solution Fresh-waste solution
Loosening and separation
Materials specific treatment
2nd part
2.6
2.7
2.1 Preliminary exploration of the waste body
“Determination of waste types, amount and location fraction”
• Vienna, Austria
• Maringá, Brasil
• Uyo, Nigéria
2.2 Feasibility study and safety concept
“Provision of environmental, health and resident protection”
• Maringa, Brasil • Abuja, Nigéria
2.3 Biological conversion (stabilisation)
• BIOPUSTER® principle
Main points:
- Achieve a aerobic state in the deposit;
- Supply of oxygen to all active zones;
- Control/removal of landfill gases (CO2, NH4, etc…);
- Patent protection.
1st part
“Aerobisation of the waste body to control toxic and carcinogenic landfill gases / improving separation”
2.3 Biological conversion (stabilization)
Main points:
- State-of-the-art technology;
- Sea container dimensions;
- Work friendly equipment;
- Adaptable to all types of waste and landfills;
- Possible to operate under all weather conditions.
2nd part
• BIOPUSTER® technology
2.4 Excavation of waste body and material extraction
• Maringa, Brasil • Berlin, Germany
2.5 Fresh-waste (domestic and medical) collection and transport
• Domestic and street waste collection • Medical waste collection
1st part
2.5 Fresh-waste (domestic and medical) collection and transport
• Domestic waste transport • Medical waste decontamination and transport
2nd part
2.6 Loosening and separation1st part
“Extraction of specific waste fractions”
Main points:
- Easy to operate technology;
- High level of efficiency;
- Adaptable to all types of waste and landfills;
- 100% recovery/recycling.
2.6 Loosening and separation2nd part
“Extraction of specific waste fractions”
2.6 Loosening and separation3rd part
“Extraction of specific waste fractions”
2.7 Material specific treatment
“Consecutive utilization or preparation for final storage”
• Technology example: construction site waste recycling
Main points:
- Capacity to shred concrete, steel-concrete, wood, metal;
- Automatic Fe-metal separation;
- State-of-the-art technology;
1st part
2.7 Material specific treatment
“Consecutive utilization or preparation for final storage”
• Technology example: plastics to diesel (DIN EN 590)
Main points:
- Possible to use all main plastic types (ex. PE, PP, etc.);
- 2 Kg plastic = 1 L diesel;
- 500 L per hour;
- “Made in Germany” technology.
2nd part
Index
1. Prof. Dr.- Ing. W. Hartung + Partner
2 Reasons for advance waste management
3. Prof. Dr.- Ing. W. Hartung + Partner – waste management solution
4. Prof. Dr.- Ing. W. Hartung + Partner – references
5. Clean Development Mechanism – waste management solution
4. Prof. Dr.- Ing. W. Hartung + Partner – references1st part
BIOPUSTER® Maringa, Brasil
Main points:
- 400 ton/day treatment;
- Open-landfill since 1973;
- Facility for 320.000 habitants;
- Year 2008.
4. Prof. Dr.- Ing. W. Hartung + Partner – references2nd part
BIOPUSTER® Berlin, Germany
Main points:
- Land recovery;
- In location separation;
- Over 250.000 ton;
- 6 months work duration;
- Year 2007.
4. Prof. Dr.- Ing. W. Hartung + Partner – references3rd part
BIOPUSTER® Uyo, Nigéria
Main points:
- Treatment plant for 1.000.000 habitants;
- 14.500.000 m³ of waste;
- Advance training and work conditions;
- Year 2006.
Index
1. Prof. Dr.- Ing. W. Hartung + Partner
2 Reasons for advance waste management
3. Prof. Dr.- Ing. W. Hartung + Partner – waste management solution
4. Prof. Dr.- Ing. W. Hartung + Partner – references
5. Clean Development Mechanism – waste management solution
4. Clean Development Mechanism
“BIOPUSTER technology is registered as CDM Project for fresh- and old-waste.”
Main points:
- Co-funding from CDM and CER;
- A solution accessible to all developing countries;
- Already used for BIOPUSTER® projects in Africa and South America.
INGENIEURGESELLSCHAFT FÜR WASSER- UND ABFALLWIRTSCHAFT MBH
PROF. DR.- ING. W. HARTUNG + PARTNER BERATUNG – GUTACHTEN – PLANUNG –
BAUÜBERWACHUNG
Thank you for the time and attention
Carlos Gama
Email: [email protected] | Tlf.: +49 531 243 7710