Fräsen und Entgraten in einemArbeitsgang.CHAMFER-CUT
Cutting andDeburring in One Process.CHAMFER CUT
Leitz Metalworking Technology Group
F-Chamfer-Cut.16.4 16.04.2004 14:44 Uhr Seite 1
Nach dem Fräsvorgang bei derVerzahnung stellt sich das Problemder Entgratung der Werkstücke.
Zum Anfasen von Zahnrädern kom-men zur Zeit in der Industrie unter-schiedliche Verfahren, wie Roll-,Drück-, Schneid- und manuellesNacharbeiten zur Anwendung. Diese Methoden benötigen separateEinrichtungen und Maschinen undsind daher aufwendig und teuer.
Um beim Entgraten Kosten und Zeit zu sparen, hat FETTE denCHAMFER-CUT entwickelt.
Alle Werkzeuge für die Verzahnungund Entgratung sind zusammen aufeinen Dorn gespannt. Nach der Her-stellung der Verzahnung mit einemFETTE Wälzfräser, kommt der auf dengleichen Dorn gespannte FETTECHAMFER-CUT zum Einsatz.
Zwei CHAMFER-CUT Werkzeuge für optimales Entgraten.
Der erste CHAMFER-CUT übernimmtdas Entgraten an der Oberseite underzeugt eine gleichmäßige Anfasungan der Stirnkante. Danach übernimmtder zweite CHAMFER-CUT dieseAufgabe für die Unterseite. Das Ergeb-nis ist ein angefastes Zahnrad, dasnicht mehr nachbearbeitet werdenmuss.
Die gesamte Anfasung mit FETTECHAMFER-CUT kann mit einerLiebherr Verzahnungs-Maschinen-Software optimal gesteuert werden(Wenden Sie sich hierzu an ihrenMaschinenlieferanten).
Die Innovation bei den Verzahnungswerkzeugen.Mit CHAMPFER-CUT� schnell und kostensparend Entgraten
Wirtschaftliches Anfasen von Zahnrädern mit dem FETTE CHAMFER-CUT
■ Verzahnen und Entgraten auf einer Maschine
■ Alle Werkzeuge sind auf einen Dorn aufgespannt
■ Verzahnungssoftware (Liebherr) steuert den Fertigungsablauf
■ Kein maschinelles oder manuelles Nacharbeiten
■ Zusätzliche Maschinen und Werkzeuge zum Entgraten sind nicht notwendig
� FETTE CHAMFER-CUT
ist zum Patent angemeldet.
F-Chamfer-Cut.16.4 16.04.2004 14:44 Uhr Seite 2
Innovation in gear-cutting tools.Fast, cost-efficient deburring with CHAMFER-CUT�
Following the cutting phase in gear-cutting procedures, the problem then arises of deburringthe workpieces.
At the moment, various differentprocedures are used in industry tochamfer gears, including deburring
by rolling, compressing, cutting andmanual reworking. These methodsneed separate devices and machines,making them time-consuming andexpensive.
FETTE has developed theCHAMFER CUT to save costs andtime in the deburring process.
All tools for gear cutting and deburringare mounted on one arbor. After thegear has been cut with a FETTE hob,the FETTE CHAMFER CUT clampedon the same arbor then comes intoplay.
Economic chamfering of gears with the FETTE CHAMFER CUT.
■ Gear cutting and deburring on one machine
■ All tools are clamped on one arbor
■ Gear cutting software (Liebherr) controls the production process
■ No machine or manual reworking■ No additional machinery or tools
needed for deburring.
Two CHAMFER CUT tools for optimum deburring.
The first CHAMFER CUT is respon-sible for deburring the surface andcreates a uniform chamfer at the topsurface. The second CHAMFER CUTis then responsible for this same taskon the underside. The result is achamfered gear that needs noadditional machining.
The whole chamfering stage withFETTE CHAMFER CUT can be con-trolled as an option with machinesoftware. Please contact yourmachine dealer.
� Patent application has been
submitted for FETTE CHAMFER CUT
F-Chamfer-Cut.16.4 16.04.2004 14:45 Uhr Seite 3
AngebotsklappeDeutsch/Englischausgeklappt
df
Spann-element 1Clampingelement 1
Spann-element 2Clampingelement 2
h
h
a
d
Zahnrad / Gear wheel
Raddaten / Gear data
Normalmodul / Zähnezahl /
Module No. of teeth
Eingriffswinkel / Kopfkreisdurchmesser /
Pressure angle Tip diameter
Fußkreisdurchmesser / Schrägungswinkel /
Root diameter Helix angle
Bearbeitungszugabe (Aufmaß pro Flanke) /
Machining allowance per flank
Flankenrichtung (R/L) / Zahnweite /
Flank direction (R/L) Base tangent length
Meßzähnezahl /
No. of measuring teeth
Oder / Kugel-, Rollen-Durch-
Or messer / Ball/roll diameter
Diametrales Kugelmaß / Diametrales Rollenmaß /
Diametrical ball dimension Diametrical roll dimension
Spannelemente / Clamping elements
Spanndurchmesser a / Spanndurchmesser c /
Clamping diameter a Clamping diameter c
Ident-Nr. des Verzahnungswerkzeuges /
Ident-No. of the gear-cutting tool
Absender / Sender
Firma / Company
Name / Name
Straße / Address
Ort / City, state, zipcode
Telefon / Phone Fax
Die Einsatzmöglichkeiten des CHAMFER-CUTwerden durch die räumlichen Verhältnisse aufder Wälzfräsmaschine bestimmt.Verfahrensbedingt gelten folgende Voraussetzungen:– Für die obere und untere Stirnfläche der
Verzahnung wird je ein CHAMFER-CUT benötigt.
– Der Durchmesser „d“ des CHAMFER-CUT kann entsprechend dem Wälzfräserdurch-messer für die Verzahnung angenommen werden.
– Der Abstand „h“ des CHAMFER-CUT kann mit 0,3 x d angenommen werden.
– Der Abstand „a“ zwischen Radachse und Achse des CHAMFER-CUT ergibt sich dann wie folgt:
„df“ ist der Fuß-kreisdurchmesser der Verzahnung.
Unter den beschriebenen Voraussetzungen istzu überprüfen, ob eine Kollision mit derAufspannvorrichtung ausgeschlossen werdenkann oder ob die Aufspannvorrichtung denErfordernissen angepasst werden kann.
The areas of application for the CHAMFER-CUT are determined by the spatial conditionson the milling cutter.The following conditions apply for theprocedure:– One CHAMFER-CUT each is required for
the top and bottom face of the gearing – The CHAMFER-CUT diameter „d“ can be
assumed to be the same as the hob diameter for the gear
– The distance „h“ of the CHAMFER-CUT can be taken as 0.3 x d.
– The distance „a“ between the gear axle and the axle of the CHAMFER-CUT is then calculated as follows:
„df“ = the rootdiameter of the gearing.
Under the conditions described, it must beexamined whether a collision with theclamping element can be ruled out or whetherthe clamping element can be adapted to therequirements.
Zur Berechnung des Entgrat-Wälzfräsers benötigen wir folgende Angaben.
We need the following details to calculate the CHAMFER-CUT tools
F-Chamfer-Cut.16.4 16.04.2004 14:45 Uhr Seite 4
AngebotsklappeDeutsch/Englischeingeklappt
Mit FETTE CHAMFER-CUTdie Zahnradfertigung optimieren
FETTE CHAMFER-CUT wird nachden speziellen Erfordernissen IhrerProduktion gefertigt. Bitte nennen Sieuns die gewünschten Parameter für ihre Produkte und wir erstellenIhnen ein Angebot über einen Wälz-fräser und den FETTE CHAMFER-CUT.
Bitte tragen sie Ihre Daten und IhrenAbsender auf der Innenseite einund senden sie uns das Formular.
Angebotsanfrage
FETTE CHAMFER CUTfor optimising the production of gears
FETTE CHAMFER CUT will bemanufactured according to the specialrequirements for your production.Please inform us of the requiredparameters for your product and we will prepare a quotation for the required hob and the FETTECHAMFER CUT.
Please enter your details includingaddress on the inside page and send us the inquiry form.
Quotation Request
Am schnellsten erreicht uns IhreAnfrage per Fax:
The quickest way to send us yourquotation request is by fax:
++49 (0)7364 95 79 30
F-Chamfer-Cut.16.4 16.04.2004 14:45 Uhr Seite 5
Prin
ted
in G
erm
any,
No.
197
3 (0
504
1 S
CH
/GK
)
ARGENTINIEN | ARGENTINASIN PAR S.A.Conesa 2 Al 18Casilla Correo No. 1801878 Quilmes – Buenoa AiresFon +54/11 42 57 43 95Fax +54/11 42 24 56 87
AUSTRALIEN | AUSTRALIANEUSEELAND | NEW ZEALANDRitec Tooling Technology LTDLevel 1Greenpark RoadPenroseAucklandNew ZealandFon +64-9/5 71 20 44Fax +64-9/5 79 99 [email protected]
BALTIKUM | BALTICSIA InstroLacplesa Str. 871011 RigaLettlandFon +3 71-7 28 85 45Fax +3 71-7 28 77 [email protected]
BELGIEN | BELGIUMSA LMT FETTE NVIndustrieweg 15 B21850 GrimbergenFon +32-2/2 51 12 36Fax +32-2/2 51 74 89
BRASILIEN | BRAZILLMT Böhlerit LTDA.Rua André de Leão 155 Bloco ACEP: 04672-030Socorro – Santo AmaroSão PauloFon +55/11 55 46 07 55Fax +55/11 55 46 04 76
CHINA | CHINALeitz Tooling Systems(Nanjing) Co. Ltd.Division LMTNo. 81, Zhong Xin RoadJiangning Development ZoneNanjing 211100Fon +86-25 52 10 31 11Fax +86-25 52 10 63 [email protected]
DÄNEMARK | DENMARKLars Østergaard APSSadelmagervej 277100 VejleFon +45-75/85 95 22Fax +45-75/85 95 88
LMG A/SNordager 16000 KoldingFon +45 36 95 50 00Fax +45 36 95 50 [email protected]
ENGLAND | UNITED KINGDOM IRLAND | IRELAND LMT FETTE LIMITEDLongfordCoventry 304 Bedworth RoadCV6 6LAFon +44 24 76 36 97 70Fax +44 24 76 36 97 71
FINNLAND | FINLANDOy Suomen Gear Tool ABBL/Box 10002211 EspooFon +35 89/8 87 04 80Fax +35 89/8 04 10 26
Oy Maanterä AbKeinumäenkuja 201510 VantaaFon +35 89/61 53 22Fax +35 89/61 53 23 50www.maantera.fi
FRANKREICH | FRANCELMT FETTEParc d’Affaires Silic-Bâtiment M216 Avenue du QuébecVillebon sur YvetteBoite Postale 76191963 Courtabœf CedexFon +33-1/69 18 94-00Fax +33-1/69 18 [email protected]
Service Center ColmarLMT-FETTE15 rue Edouard Brauly21 estF-68000 ColmarFon +33-0/3 89 41 03 37Fax +33-0/3 89 41 45 90
INDIEN | INDIALMT Fette India Pvt Ltd.Old No. 14, New No. 29, II Main RoadGandhinagar, AdyarChennai - 600 020Fon +91-44/2 44 05 136/137Fax +91-44/2 44 05 [email protected]
INDONESIEN | INDONESIAJakarta officePT Germantara Tooling Service Indonesia (GTS)Jl. Pulo Sidik Blok R29Pulogadung Industrial EstateJakarta 13930, IndonesiaFon +62-21/46 83 53 13/-46 83 53 15Fax +62-21/46 83 53 [email protected]
Surabaya officePT Gema Trikarsa Sarana (GTS)Jl. Dharmahusada Selatan No. 23Surabaya 60285/IndonesiaFon +62-31/5 93 91 80Fax +62-31/5 94 30 [email protected]
Bandung officePT Gemateknika Toolindo Sistema (GTS)Jl. Batununggal Indah 185Bandung 40266Fon +62-22/7 50 16 19Fax +62-22/7 50 16 [email protected]
IRAN | IRANB.A.I. Boresh Abzar Iran Co. Ltd.No. 40 Zafar Street(Vahid Dastegerdi)Tehran 19117Fon +98 21/2 22 76 10Fax +98 21/2 27 24 [email protected]
ITALIEN | ITALYFerruccio Allasia & c.s.r.f.Aktiva s.r.f.Via G. Pastorelli 1320143 MilanoFon +39-02/8 35 61 66Fax +39-02/8 32 10 [email protected]
JAPAN | JAPANKTI Kimura Techno Import Toei-cho 6-9-3, Mizuho-ku467-0017 NagoyaFon +81-52/8 52-88 92Fax +81-52/8 53-02 [email protected]
KOREA | KOREAGlobal Tooling Service. Inc.607, Byugsan-Kyungin Kumchun-GuDigitar Valley 2481-10 Gasan-dong SeoulFon +82/2-21 13-09 07Fax +82/2-22 13-09 [email protected]
MALAYSIA | MALAYSIAGerman Tooling Systems Sdn Bhd14, Jalan BK 1/17Taman Perindustrian Bandar KinraraBatu 6 1/2, Jalan Puchong58200 Kuala LumpurFon +60-3/5 75 88 98Fax +60-3/5 75 89 [email protected]
MEXIKO | MEXICOLMT Böhlerit S.A. de C.V.Matias Romero No. 1359Col. Letran ValleMex 03650 Mexico D.F.Fon +52/55 56 05 82 77Fax +52/55 56 05 85 [email protected]
NIEDERLANDE | NETHERLANDSHagro Precisie bvIndustriepark 185374 CM SchaijkFon +31-4 86/46 24 24Fax +31-4 86/46 16 [email protected]
NORWEGEN | NORWAYNor-Swiss A/SRyenstubben 5 / 0679 OsloFon +47-23/24 10 20Fax +47-23/24 10 [email protected]
Deli Verktoeysenter A/SDelivejen 51540 VestbyFon +47-64/95 62 18Fax +47-64/95 62 [email protected]
ÖSTERREICH | AUSTRIAKROATIEN | CROATIASLOWENISCHE REPUBLIK |REPUBLIC SLOVENIAFETTE PräzisionswerkzeugeHandelsgesellschaft mbHRodlergasse 5, 1190 WienFon +43-1/3 68 17 88Fax +43-1/3 68 42 [email protected]
POLEN | POLANDWiemikMaciej Mikolajewskiul. Wierzbiecice 37A/661-558 PoznanFon +48-61/6 65 80 08Fax +48-61/8 33 49 [email protected]
RUMÄNIEN | ROMANIAGTS Group SibiuSti. Dimitrie Cantemir, 342400 SibiuFon +40/2 69 21 04 17Fax +40/2 69 21 55 [email protected]
SCHWEDEN | SWEDENAB Liljegrens MaskinverktygBox 161Nydalavaegen57422 VetlandaFon +46-3 83/1 78 50Fax +46-3 83/1 74 [email protected]
EDECO Tool ABBos 2119S-65002 Karlstad, SwedenFon +46/54 55 80 00Fax +46/54 55 80 [email protected]
SCHWEIZ | SWITZERLANDVargus WerkzeugtechnikSnel AG, Knonauerstr. 56Postfach 406 / CH-6330 ChamFon +41-41/7 84 21 21Fax +41-41/7 84 21 [email protected]
SINGAPUR | SINGAPORECombi Tools(Singapore) PTE. LTD.Blk 2022 Bukit Batok Street 2302-174Singapore 659527Fon +65/5 61-23 93Fax +65/5 60-67 [email protected]
SPANIEN | SPAINLMT Böhlerit S.L.C/. Narcis Monturiol, 11 Planta 1a08339 Vilassar De Dalt, BarcelonaFon +34/37 50 79 07Fax +34/37 50 79 [email protected]
SÜDAFRIKA | SOUTH AFRICATraconsa (Pty) Ltd.P.O. Box 3160Johannesburg 2000Fon +27 11/3 94 28 10Fax +27 11/9 70 17 [email protected]
TAIWAN | TAIWANYonchin Enterprises, Inc.5F, No. 100, Hsing Der RoadSan Chung City 241Taipei HsienFon +88-6/2-22 78-93 30Fax +88-6/2-22 78-93 [email protected]
THAILAND | THAILANDTotal Tools Co., Ltd.57/23 Moo Ramintra Road, Km. 2BangkhenBangkok 10220Fon +66-2/9 71-6 85 68Fax +66-2/5 52-27 [email protected]
TSCHECHIEN | CZECH REPUBLICSLOWAKISCHE REPUBLIK |REPUBLIC SLOVAKIALMT FETTE spol. sr.o.Drázni 7627 00 Brno-SlatinaFon +420-5/48 21 87 22Fax +420-5/48 21 87 [email protected]
TÜRKEI | TURKEYBöhler Sert Maden Takim Sanayi veTicaret A.S.E5 Yolu üzeri No. 22 P.K. 167Kartal 81412 IstanbulFon +90-216/3 06 65 70 PbxFax +90-216/3 06 65 [email protected]
UKRAINE | UKRAINETechnopoliceSosiurystr. 702090 KiewFon +38-44/4 51 86 51/5 36 16 32Fax +38-44/5 36 16 [email protected]
UNGARN | HUNGARYLMT Boehlerit Kft.Kis-Duma u.6PoBox. 2036 Erdliget Pf. 322030 ErdFon +36-23/52 19 10Fax +36-23/52 19 [email protected]
USA | USAKANADA | CANADALMT-FETTE Inc.18013 Cleveland ParkwaySuite 180Cleveland, Ohio 44135Fon +1-2 16/3 77-61 30Fax +1-2 16/3 77-07 87
VENEZUELA | VENEZUELAMaquinaria Diekmann S.A.Apartado 40.112Caracas 1040 – AVenezuelaFon +58 2/61 74 22Fax +58 2/62 69 79Tlx. 21 467
LMT Deutschland GmbHHeidenheimer Straße 108D-73447 Oberkochen Tel. +49 (0) 73 64/95 79-10Fax +49 (0) 73 64/95 79-30E-mail: [email protected]: www.LMT-tools.com
Fette GmbHGrabauer Str. 24D-21493 SchwarzenbekTel. +49 (0) 41 51 12-0Fax +49 (0) 41 51 37 97E-mail: [email protected]: www.fette.com
F-Chamfer-Cut.19.4 19.04.2004 12:01 Uhr Seite 6