Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 1
Berechnung von Strukturgleichungsmodellen mit Amos Was kann Amos? „Klassische“ Strukturgleichungsmodelle (Kovarianzstrukturanalysen, Pfadmodelle mit/ohne latente Variablen) Modellierung mit/ohne Mittelwertsstruktur Multisample/Multigroup-Models etc. ...
Was kann Amos nicht? Modelle für kategoriale Variablen „Second Generation of SEM“ (→ Mplus)
Besonderheiten: Full Information Maximum Likelihood Schätzer von Arbuckle → „state of art“ Umgang mit fehlenden Werten (inzwischen auch bei Mplus, Mx,
Lisrel) Sehr eingängiges graphisches Interface → niedrige „Einsteigerhürde“
Literatur / Information: AMOS Homepage: www.spss.com/amos/ Byrne, B.M. (2001). Structural equation modeling with AMOS. Mahwah: Lawrence Erlbaum.
Im folgenden kurze Einführung: Arbeiten mit Amos Graphics
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 2
Graphische Modellspezifikation → Modell am Bildschirm zeichnen
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 3
Fenster „Object Properties“ (Rechtsklick auf Objekt) → Zuweisung von Variablennamen, Variabenlabels, Parameterbenennungen, fixen Parameterwerten, etc. ...
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 4
Fenster „Data Files“ → Zuweisung des Datensatzes
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 5
Fenster „Analysis Properties“ → Spezifikation von Schätzalgorithmus, gewünschten Outputs, etc.
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 6
Rechnen:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 7
Fenster „Text Output” → Ergebnisse!
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 8
Beispiel Model Fit:
Informationen /Erklärungen zum Output abrufbar!
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 9
Beispiel Paramterschätzungen:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 10
Beispiel Auflistung direkter, indirekter und totaler Effekte:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 11
Spezifizierung einer Mittelwertsstruktur → FIML-Schätzung bei fehlenden Werten im Datensatz:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 12
Komplexeres Beispiel:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 13
Abruf von Modification Indices → nur bei vollständiger Datenmatrix ohen Missings!
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 14
Ergebnis Modification Indices:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 15
Und noch ein Beispiel:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 16
Spezifikation von Multisample/Multigroup Models → Fenster „Manage Groups“:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 17
Spezifikation von Multisample/Multigroup Models → Zuweisung der Daten für die Subgruppen über die Fenster „Data Files“ → „Grouping Variable“ → „Group Value“:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 18
Spezifikation unterschiedlicher Modellversionen → Test von Modellrestriktionen per Nested Model Comparison: Dazu zunächst die relevanten Parameter benennen:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 19
Spezifikation unterschiedlicher Modellversionen → Test von Modellrestriktionen per Nested Model Comparison: Dann die Modellversionen/-restriktionen im „Manage Models“ Fenster spezifizieren:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 20
Nested Model Comparison → Beispiel Output Model Fit:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 21
Nested Model Comparison → Beispiel Output Chi-Quadrat-Differenzen-Test:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 22
Spezifikation von Cross-Group-Constraints in Multisample-Models (+ Test per Nested Model Comparison) : Dazu wieder zunächst die relevanten Parameter benennen – mit unterschiedlicher Bezeichnung für jede Gruppe:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 23
Spezifikation von Cross-Group-Constraints in Multisample-Models (+ Test per Nested Model Comparison) : Dann wieder Spezifikation der Constraints im „Manage Models“ Fenster:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 24
Hinweise zur Produktion von Graphiken mit Amos → Ergebnisse graphisch ausgeben:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 25
Hinweise zur Produktion von Graphiken mit Amos → Tool „Drag Properties“:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 26
Hinweise zur Produktion von Graphiken mit Amos → Fenster „Interface Properties“ im Menü „View“:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 27
„Shortcuts“ zur Modellspezifikation im Menü „Plugins“ → z.B. Spezifikation von Growth Curve Models:
Oliver Schiling____ Handout:: Amos 6.0 / Graphics_____ 28
Ergebnis: