TTTeeellleeeNNNEEETTT SSSDDD
Ver. 04-08
LESEN UND AUFBEWAREN
DEU ENG
SOFTWARE „TeleNET“ und Daten-Import (SD-Karte)
TeleNET SD
INHALT INTRODUCTION Seite 3 1.1 Einleitung Introduction
INSTALLATION INSTALL Seite 4 2.1 Voraussetzungen Minimum requirements Seite 4 2.2 Vor der Installation
Suggestion before installation
Seite 5 2.3 Installation
Installation
TELENET TELENET ACCESS Seite 6 3.1 Telenet starten Telenet Access
SPRACHE ÄNDERN LANGUAGE SELECTION Seite 5 4.1 Sprache ändern Language selection
DATEN-IMPORT SD DATA IMPORT Seite 10 5.1 Daten-Import von SD-Karte SD data import
VORGABEN SETTINGS Seite 17 6.1 Geräte-Name Device name Seite 18 6.2 SD-Pfad SD default path
ININININHALTHALTHALTHALT / / / / CONTENTSCONTENTSCONTENTSCONTENTS
1
3
4
5
2
6
Inhalt - Index
TeleNET SD
Seite 3 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
EINLEITUNG - INTRODUCTION
Dieses Dokument ersetzt nicht das Handbuch. Es
repräsentiert eine Anweisung für den Datenimport
von SD-Karte.
This document do not substitute the manual, but
it’s a syntethic guide for import of data saved on SD
into the software program.
PRODUKT-BESCHREIBUNG:
Temperatur-Speicher und –Anzeige der registrieren
Daten im PEGO EXPERT. Die gespeicherten Daten
können via SD-Karte (Secure Digital) exportiert
werden.
.
PRODUCT DESCRIPTION: Application for the storage/display of data saved on
PEGO boards of the PLUS EXPERT series. Data can
be transferred from boards to the programme by
way of a Secure Digital memory card.
CHARAKTERISTIK: > Das Programm TeleNET SD finden Sie auf der
“SPZ-SD-CARD-SW” (SD&USB in einem).
> Die SD-Karte wird für den Datentransfer
verwendet. Ausserdem sind die Handbücher
PEGO Expert Plus und TeleNET hinterlegt. > Jede Kühlanlagensteuerung wird durch eine
serielle Nummer identifiziert.
> Einfaches Herunterladen der Daten und Alarme
sowie Grafikanzeige.
CHARACTERISTICS: > The Program TeleNET SD you will find on “SPZ-SD-
CARD-SW”.
> Use of Secure Digital memory cards for data
transfer.
> Instrument clearly identified with serial number. > Graphics can be customised and different
parameters compared.
> Saved data and alarms can be displayed.
EINLEITUNGEINLEITUNGEINLEITUNGEINLEITUNG / INTRODUCTION / INTRODUCTION / INTRODUCTION / INTRODUCTION
1 Einleitung - Introduction
1.1
TeleNET SD
Seite 4 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
VORAUSSETZUNGEN – MINIMUM REQUIREMENTS Bevor die Software TeleNET installiert wird, müssen
Sie sich vergewissern, dass Ihr PC die Mindestvoraussetzungen erfüllt.
Before installing TeleNET software please check
that your computer has the minimum requirements listed on the table below.
VORAUSSETZUNGEN /
REQUIREMENTS
BETRIEBSSYSTEM
OPERATING SYSTEM
WINDOWS XP (SP2)
WINDOWS VISTA
ARBEITSSPEICHER
RAM MEMORY
1 GB
2 GB (BEI WINDOWS VISTA)
BILDSCHIRM (MINDESTAUFLÖSUNG)
SCREEN (MINIMUM RESOLUTION)
1024X768 24BIT (EMPFEHLUNG 1280X1024 32BIT)
1024X768 24BIT (RECOMMENDED 1280X1024 32BIT)
FESTPLATTE
HARD DISK
4 GB SPEICHERBEDARF
4 GB OF AVAILABLE SPACE
VOR DER INSTALLATION – SUGGESTION S BEFORE INSTALLATION Bevor die Software installiert wird, empfehlen wir ein PC-Backup aller Daten, um bei einem ev.
Problemfall den PC wieder im Ursprungszustand
herstellen zu können.
Before installing the software it’s suggested to make a backup of computer data to rescue them in
case of malfunctioning.
INSTALLATIONINSTALLATIONINSTALLATIONINSTALLATION / INSTALL / INSTALL / INSTALL / INSTALL
2.1
2.2
2 Installation - Installation
TeleNET SD
Seite 5 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
INSTALLATION - INSTALLATION Um die Software TeleNET SD zu installieren,
Folgendes beachten:
> Die komprimierte ZIP-Datei auf der SD/USB-
Karte doppelklicken und auf Ihre Festplatte
expandieren.
> Auf Festplatte, unter dem Pfad „ALL“ die Datei
SETUP.EXE suchen und doppelklicken.
> Den ersten Punkt “Setup All” anklicken.
To install TeleNET SD software please follow these
items:
> Insert TeleNET CD into the CD slot of your
computer.
> Using Windows Explorer start SETUP.EXE
included on CD (if your computer has cd-rom
autorun the setup will be automatically
executed).
> From SETUP program select the complete setup
of the application.
> Folgen Sie der Anweisung auf Ihrem Bildschirm.
> ACHTUNG: Während der Installation ist es möglich, dass
das System neu gestartet werden muss. Nach
dem Neustart wird die weitere Installation
automatisch durchgeführt.
> Am Ende der Installation erscheint folgendes
Zeichen auf Ihrem Monitor:
> Follow instructions on the screen to proceed
with installation.
> Warning:
During this process program could need a
system restart; after that the installation will
automatically re-start.
> When installation ends it will appear a link on
the desktop with the following icon:
TELENET / TELENET ACCESSTELENET / TELENET ACCESSTELENET / TELENET ACCESSTELENET / TELENET ACCESS
A A A A
2 Installation - Installation
2.3
TeleNET SD
Seite 6 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
TELENET STARTEN – TELENET ACCESS
> Um TeleNET zu starten dieses Symbol in Ihrem Monitor (Desktop) anklicken.
> Eine Eingabeaufforderung folgt. Bitte
nachstehendes eingeben:
Login: adminlogin
Password:
mit <OK> bestätigen
> To start the program select TeleNET icon
on your Desktop and press "Enter".
> In the access mask please insert the following
default data:
Login: adminlogin
Password:
press then <OK>
3.1
3 Telenet starten – Telenet Access
TeleNET SD
Seite 7 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
SPRACHE WÄHLEN – LANGUAGE SELECTION Im Auslieferzustand ist zunächst die Sprache
englisch vorgegeben. Zum ändern der Sprache wie folgt vorgehen:
> Taste "Setup" anklicken” unterhalb der
Überschrift "Tele.NET setup".
Ev. noch die Hochtaste drücken , falls das Menü
ausgeblendet ist.
Default language setted on TeleNET is English; to
change this setting please follow the next items:
> press "Setup" button on "Tele.NET setup" menu
located on the left part of the program.
Press symbol at the left of the menu in case
displaying of the items are hided.
> Danach den Reiter “Language” (Sprache)
anklicken und oben rechts dieses Symbol
anklicken. und Ihre Sprache auswählen.
> Select "Language" menu bar and press the
button "edita" .
->
4.1
4 Sprache wählen – Language selection
SPRACHESPRACHESPRACHESPRACHE / LANGUAGE SELECTION / LANGUAGE SELECTION / LANGUAGE SELECTION / LANGUAGE SELECTION
TeleNET SD
Seite 8 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
> Zum Speichern wieder oben rechts auf dieses
Symbol klicken. . > Das Programm muss nochmals gestaret
werden. Erst danach wird die geänderte
Sprache angezeigt.
> Select the desired language on the menu and
save your new selection with the button "salva"
.
> To apply changes exit TeleNET program and
then restart it.
4 Sprache ändern – Language selection
TeleNET SD
Seite 9 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
DATEN-IMPORT VON SD-KARTE - SD DATA IMPORT Daten-Import auf Ihren PC von SD-Karte, der zuvor
exportierten Daten aus dem PLUS EXPERT.
Importiert werden Temperaturen und Alarme.
Es gibt mehrere Möglichkeiten, hier wird die
einfachste Auslesemöglichkeit beschrieben.
> „Automatischer Import“ anklicken. Falls das
Untermenü versteckt ist, diese Taste drücken:
Below are the items to import data on SD memory
card from PLUS EXPERT series panels.
The following descripted method is not the unique
one, but it the simplest and more complete one.
> Press "Automatic Import" button ("Importa
Automatico") on "SD Card" menu located on
left side of the program.
Press symbol at the left of the menu in case
displaying of the items are hided.
IMPORTIMPORTIMPORTIMPORT VONVONVONVON SDSDSDSD----KARTEKARTEKARTEKARTE / SD DATA IMPORT / SD DATA IMPORT / SD DATA IMPORT / SD DATA IMPORT
5.1
5 Daten-Import von SD-Karte - SD data import
TeleNET SD
Seite 10 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
> Die SD/USB-Karte an Ihrem PC einschieben (SD-
Slot oder beliebiger USB 2.0 Einschub und diese
Taste drücken .
> Den Pfad der SD-Karte anwählen und danach
bestätigen mit .
> Ihren gewünschten Pfad zum Abspeichern
vorgeben mit .
> Insert SD card path pressing the button .
> After path selection confirm with the button
.
> Press the button to go on with SD card
data reading.
5 Daten-Import von SD-Karte - SD data import
TeleNET SD
Seite 11 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
> Die vorhandenen Dateien auf SD-Karte,
inklusive der zuletzt runtergeladenen Dateien
werden angezeigt. Dabei wird auch die
Seriennummer des jeweilen EXPERT PLUS
angezeigt
> Mit einem Haken bitte vorgeben, welche
Daten Sie importieren möchten.
> Die gewählten Daten (mit Haken) werden nach
dem Auslesen automatisch gelöscht, ausser Sie
entfernen den Haken an dieser Stelle.
> Dieses Smybol bedeutet abbrechen: und
dieses Symbol ein Schritt zurück .
> Zum Bestäigen des Daten-Import dieses Symbol
anklicken .
> Now appear the list of last saved data for each
panel (identified by serial number) on SD.
> The selection flag allows not to import data
related to that device if not selected.
> By default files, once imported, are
automatically deleted from SD to avoid its
complete filling in the time. Deselect the flag
in case you want to
exclude this option.
> The button allows to cancel import
operation while button go back to
previous page.
> Press button to confirm and start the
data import process.
5 Daten-Import von SD-Karte - SD data import
TeleNET SD
Seite 12 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
> Der Import-Status wird angezeigt.
> Nach erfolgreiche Import öffnet sich ein
weiteres Fenster.
> Bestätigen mit .
> During import process a status bar is shown
with progress in percentual.
> At the end of import a windows is shown to
indicate the end of the process.
> Confirm with button .
5 Daten-Import von SD-Karte - SD data import
TeleNET SD
Seite 13 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
> Die zuvor angewählten Daten der SD-Karte
werden angezeigt. Im Beispiel wurden von 5
verschiedenen PLUS 200 Expert die
Temperatuen auf die SD-Karte übertragen.
> Das jeweils erste und letzte Speicherdatum und
Uhrzeit wird angezeigt.
> On SDC Control are visible Plus EXPERT series
panels, each one identified by its own
UNIVOCAL serial number.
> It’s shown also first and last temperature data
present on database related to the instrument
in order to verify its upgrade state.
5 Daten-Import von SD-Karte - SD data import
TeleNET SD
Seite 14 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
> Ein Gerät doppeklicken.
> Den gewünschten Zeitbreich vorgeben und
bestätigen mit .
> Selecting the instrument with a double click
from SDC Control window it enters on device
history.
> Select the period whereof it’s needed to see
the history and confirm with button .
TeleNET SD
Seite 15 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
> “Grafik” anklicken ("Graph") und der
gewünschten Zeitbreich wird grafisch
angezeigt.; Unter “Vorgänge” ("Events")
werden die Alarme angezeigt und unter
"Monitoring" die Temperaturen in
Tabellenform. In der tabellarischen Anzeige
wird oben rechts das Excel-Symbol sichtbar.
Durch anklicken wird der Daten-Export nach
Excel ausgeführt.
> Für Ausdruck dieses Symbol drücken .
> Selecting the item "grafico" ("Graph") it’s
possible to display graphic of the selected time
period; on "eventi" ("Events") registered
alarms are shown and on "Monitoraggio"
("Monitoring") registered temperatures are
shown in a table format.
> The button allows to print selected data.
5 Daten-Import von SD-Karte - SD data import
TeleNET SD
Seite 16 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
GERÄTE-NAME – DEVICE NAME Für jeden EXPERT können Sie einen Namen vergeben, um es leichter indentifizieren zu können.
> Sobald Sie das Gerät gewählt haben, siehe Bild,
unterhalb dem Pfad Netzwerk (Netwerk) / SD-
Card, die Taste "Modify Device" drücken.
Wenn die Vorgaben nicht sichtbar sind, diese
Taste drücken .
> Oben rechts diese Taste drücken , um das
Fenster für die Vorgaben zu öffnen. Sie können
den Namen des Geräts nun vorgeben.
> Speichern mit .
For each device it’s possible to customize name to better and easier identify it.
> Once selected the desired instrument from
"rete strumenti" ("Network") tree press the
button "Modifica strumento" ("Modify Device")
on "SD Card" menu located on the left side of
the program.
Press symbol at the left of the menu in case displaying of the items are hided.
> Press the button "edita" . and modify the device name.
> Save the changing by pressing the button
"salva" .
6.1
VorgabenVorgabenVorgabenVorgaben / SETTINGS / SETTINGS / SETTINGS / SETTINGS
6 Vorgaben - Settings
TeleNET SD
Seite 17 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT Rev. 04-08
PFAD FÜR SD-KARTE FESTLEGEN - PATH DI DEFAULT SD
Der Pfad für die SD-Karte kann festgelegt werden.
> Taste "Setup" drücken, danach den Reiter
"Tele.NET setup". Falls das Menü versteckt ist,
diese Taste drücken .
> Sobald der Reiter "Tele.NET" angeklickt wurde
hier anklicken . > Den Pfad auf Ihrem PC festlegen, wo sich die
SD-Karte standardmässig befindent .
> Bestätigen mit .
> Falls gewünscht, kann auch hier nochmal die
Sprache vorgegeben werden. Danach wieder
abspeichern mit .
> Die neuen Vorgaben werden erst nach Neustart
des Programms TeleNET übernommen.
To avoid the insertion of an import SD path it’s
possible to set a default path in the following way.
> press the button "Setup" on the "Tele.NET
setup" menu located on the left side of the
program.
Press symbol at the left of the menu in case displaying of the items are hided.
> Select the "Tele.NET" menu bar and press the
button "edita" . > Insert SD card path pressing the button .
> After path selection confirm with the button
.
> Select the desired language on the menu and
save your new selection with the button "salva"
.
> To apply changes exit TeleNET program and
then restart it.
6.2
6 Vorgaben - Settings
TeleNET SD
Seite 18 DATEN-IMPORT VON SD-KARTE
SYNTETHIC GUIDE FOR SD IMPORT
Rev. 04-08
NOTIZEN