Profil-MontagesystemProfile Assembly System
Das Profil-Montagesystem bietetFlexibilität und Wirtschaftlichkeit durchAluminiumprofile, die einfach zu mon-tieren und universell einsetzbar sind.Eine große Anzahl unterschiedlichsterProfilquerschnitte und ein umfang-reiches Zubehörprogramm ermöglichenfast jeden denkbaren Aufbau.
The Profile Assembly System offers flexi-bility and efficiency using aluminiumprofiles that are easily assembled andsuitable for a multiplicity of applications.A large variety of different profile sectionsand accessory parts make almost everyimaginable construction possible.
II - 2
S-Profile ....................................6 - 8
F-Profile ..................................9 - 22
Sonderprofile .......................23 - 30
Klemmprofile .......................32 - 39
Spannbügel-Verbindung ............42Spannbügel-Lageschema ............43Spannbügelverbindung(Montageschritte) ................44 - 45Spannbügelsatz(technische Daten, Bestelldaten)46Spannschraube ............................47Flanschleisten-Verbindung .........48Flanschleisten-Lageschema.........49Flanschleistenverbindung(Montageschritte) ................50 - 51Flanschleistensatz(techn. Daten, Bestelldaten)52 - 54Knotenbleche ..............................56Profilverbinder -W3- ...................57Anschlussplatte............................58Profilwinkel ..........................60 - 61Knotenwinkel.......................62 - 63Klemmstück WV ..........................63Eckverbinder -R-, -GG-.................64Eckverbinder KL/KLE/KLV............66Eckverbinder KLW/KLWK............67Spannschraube ............................68
Profilverbinder -Quer-.................71Klemmstück KV ...........................71
5Profil-Gelenk (variabel)...............73Profil-Doppelgelenk (variabel) ...73Verbindungsknoten 2x40 (45) ....74Verbindungsknoten 3x40 (45) ....74Profilverbinder -W1/2- ................75
Anschlussplatte............................77Profilverbinder -L- .......................78Verbindungselemente ........80 - 81
Kapitelübersicht Profil-Montagesystem
ÜbersichtSummary
II - 3
Hammerschraube .........................83Nutenstein -N- (normal) .............. 83Nutenstein -R- (Rhombus) ...........84Nutenstein -F- (mit Feder) .......... 84Nutenstein -E- (einschiebbar) ..... 85Nutenstein -L- (lang)....................85Nutenstein -K- (kurz)................... 86Nutenstein -P- (potential)............87Potentialausgleich ........................87Stangenmaterial Nutenstein -N- .88Verwendung der Nutensteine .....89Hängegleiter.................................90Schrauben / RK-Dehnschrauben ..91
Abdeckkappen ......................92 - 93Abschlussplatte.............................94Abdeckprofil .................................95
Bestelldaten Flächenelem. .......... 97Übersicht Flächenelemente ..98 - 99Einfassprofil — 2-teilig — .........100Eckstück ..................................... 100Montagebeschreibung.............. 101Einlassprofil ............................... 102Schiebetürprofil ......................... 102Rahmenprofil............................. 103Rahmeneckverbinder .................103Blockverbinder ..................104 - 105Blockverbinder -L- ......................104Blockverbinder -G- .....................105Blockverbinder -K-......................105Vario-Quick Halteblock -R- ........106Vario-Quick Halteblock -S-.........106Vario-Quick Halteblock -L-.........107Vario-Quick Halteblock -K- ........108Quick Kabelhalter ......................108
Gelenkstützfuß...........................111Gelenkstützfuß mitSchwingungsdämpfer ............... 111Anschlussplatten Stützfüße. 112 - 113Fundamentwinkel ..................... 114Klemmstück FKV, FV ................. 115Fußplatte ................................... 115Lenkrolle .................................... 116Bockrolle .................................... 117Fußstütze FSH .............................118
Türschloss................................... 121Türschloss -KL- ........................... 121Klapp-Scharnier .................122 - 123Aushänge-Scharnier......... 124 - 125Hebelzylinderschloss ..................127Kugelschnäpper..........................127Magnetschloss ........................... 127Türrahmenanschlag ...................128Handgriff .................................. 128Sicherheitsschalter ............130 - 132Anwendungsbeispiel Beschläge 133
Gleitstück/FörderelementeGleitstück....................................136Laufrollenwagen ........................137Transport — Förderrolle ........... 135Transport — Förderwalze ..........135Flachriemenprofil .......................137
Pneumatik-Anschlussplatte ...... 139Pneumatik-Anschluss ................ 139
II - 4
S-Profiles ...................................6 - 8
F-Profiles .................................9 - 22
Special profiles .....................23 - 30
Clamping profiles.................32 - 39
Hidden bracket connection ........42Hidden bracket/assembly sketch 43Hidden bracket connection(Assembly steps)...................44 - 45Hidden bracket(Technical data and code n°) ......46Hidden screw...............................47Flange bracket connection .........48Flange bracket/assembly sketch .49Flange bracket connection(Assembly steps)...................50 - 51Flange bracket connection(Technical data, code n°) .....52 - 54Bracing plates ..............................56Mitre joint -W3-...........................57Connecting plate.........................58Profile angle bracket ...........60 - 61Angle bracket.......................62 - 63Clamp WV....................................63Corner joint -R-, -GG- ..................64Corner joint KL/KLE/KLV .............66Corner joint KLW/KLWK .............67Hidden screw...............................68
Profile connectors - transvers.- ...71Clamp KV .....................................71
Profile joint (variable) .................73Profile double joint (variable) ....73Frame joint 2x40 (45) ..................74Frame joint 3x40 (45) ..................74Mitre joint -W1/2-........................75
Connecting plate.........................77Profile connector -L-....................78Suspension joints..................80 - 81
Summary Profile Assembly System
ÜbersichtSummary
II - 5
Hammerhead screw .....................83Slot stone -N- (normal)................ 83Slot stone -R- (rhombus) ..............84Slot stone -F- (with spring clip) .. 84Slot stone -E- (high loads) ........... 85Slot stone -L- (long) .....................85Slot stone -K- (short) ................... 86Slot stone -P- (potential) .............87Equipotential bonding.................87Bar material slot stone -N- ...........88Use of slot stones .........................89Overhead slide............................. 90Screws / elastic screws (RK) ........ 91
End caps .................................92 - 93End plates .....................................94Cover profile .................................95
Order data. .................................. 97Summary................................98 - 99Two-part insert profile ..............100Corner element ......................... 100Assembly instructions................ 101Insert profile .............................. 102Sliding door profile ................... 102Frame profile ............................. 103Frame corner connector.............103Block joint..........................104 - 105Block joint -L-..............................104Block joint -G-.............................105Block joint -K- .............................105Vario-Quick Block -R- .................106Vario-Quick Block -S-..................106Vario-Quick Block -L-..................107Vario-Quick Block -K- .................108Quick Cable Clip .........................108
Foot.............................................111Foot with shock absorber ......... 111Connecting plate f. foot ...112 - 113Base angle.................................. 114Clamp FKV, FV ........................... 115Base plate .................................. 115Castor with brake...................... 116Castor ......................................... 117Footrest FSH................................118
Door lock ................................... 121Door lock -KL-............................ 121Flap hinge..........................122 - 123External hinge.................. 124 - 125Cylinder lock...............................127Ball and socket catch..................127Magnetic lock ............................ 127Door frame stop .........................128Handle ....................................... 128Safety switch .....................130 - 132Application example hinges ......133
Sliding piece/transp. elem.Sliding piece ...............................136Roller element ............................137Transport and conveyor rollers 135Flat belt profile...........................137
Pneumatic connecting plate..... 139Pneumatic connection .............. 139
II - 6
4.005000 Zuschnitt Cut max. 6000 mm hell natural
4.005001 Stange Bar à 6000 mm hell natural
4.005010 Zuschnitt Cut max. . 6000 mm schwarz black
4.005011 Stange Bar à 6000 mm schwarz black
S-30x30
Fläche surface 340 mm2
l 3,4 cm4
W 2,3 cm3
Gewicht weight 917 g/m
S-40x40
Fläche surface 659 mm2
l 11,3 cm4
W 5,6 cm3
Gewicht weight 1780 g/m
4.015000 Zuschnitt Cut max. 6000 mm hell natural
4.015001 Stange Bar à 6000 mm hell natural
4.015010 Zuschnitt Cut max. . 6000 mm schwarz black
4.015011 Stange Bar à 6000 mm schwarz black
4.006500 S-30x30 30 -L-
längs + quer
long + transv.
4.006501 S-30x30 40 -L-
4.006700 S-30x30 30 -F-
4.006701 S-30x30 40 -F-
Anschluss1 Spannbügel
4.016500 S-40x40 40 -L- längs + quer
long. + transv.4.016700 S-40x40 40 -F-
Anschluss1 Spannbügel
Connection1 hidden bracket
Connection1 hidden bracket
ProfileProfiles
II - 7
Fläche surface 563 mm2
l 8,4 cm4
W 3,7 cm3
Gewicht weight 1520 g/m
4.115000 Zuschnitt Cut max. 6000 mm hell natural
4.115001 Stange Bar à 6000 mm hell natural
S-40x80
Fläche surface 1237 mm2
lx 19,4 cm4
ly 76 cm4
Wx 9,7 cm3
Wy 19 cm3
Gewicht weight 3340 g/m
4.035000 Zuschnitt Cut max. 6000 mm hell natural
4.035001 Stange Bar à 6000 mm hell natural
4.035010 Zuschnitt Cut max.. 6000 mm schwarz black
4.035011 Stange Bar à 6000 mm schwarz black
S-R40
4.036500 S-40x80 40 -L- längs long.
4.036501 S-40x80-2 40 -L- quer transv.
4.036700 S-40x80 40 -F- längs long.
Anschluss -längs-1 langer SpannbügelLongitud. connection1 long hidden bracket
Anschluss -quer-2 kurze SpannbügelTransvers. connection2 short hidden brackets
4.116700 S-R 40 40 -F- längs+quer long.+transv.
Anschluss1 Spannbügel
Connection1 hidden bracket
II - 42
Spannbügelverbindung Hidden bracket connection
Der Stahlgewindeeinsatz wird indie Hohlkammer des Profils einge-bracht, um mittels Befestigungs-schraube einen sicheren Halt desSpannbügels zu gewährleisten.
Hierdurch wird nachträglich nurdort Material eingebracht, wo essinnvoll gebraucht wird, d.h. dasProfil ist gewichtsparend konzi-piert. Die Flächenanordnung wirdsomit vom Mittelpunkt in Randla-gen gebracht und wirkt wider-standserhöhend.
Großflächige Berührung zwi-schen Profil und Nutenstein
Zwischenraum zur Kompensationvon dynamischer Wechselbe-anspruchung (Temperatur,Vibration) und für die Klemmwir-kung
Großflächige Berührung –dadurch selbständiges Ausrich-ten der Profile zueinander
Sauberer Abschluss –keine herausragenden, stören-den Befestigungsteile
Vierkant dientder Zentrierungund der Verdreh-sicherheit.
Raum zwischen Gewindeeinsatzund Spannbügel dient derKompensation von dynami-schen Wechselbeanspruchun-gen der WerkstoffpaarungStahl/Aluminium
Feststellschraube/Federbügelzum exakten Ausrichten derVerbindung
Stahlgewindeeinsatz gehärtet,selbstschneidend mit Innen-sechskant zur Aufnahme desInnensechskantschlüssels
Senkung für Spanaufnahme
Führungs- und Zentrieransatz
Gewindedurchgangsloch zurAufnahme der Spannbügelbe-festigungsschraube
The steel insert is screwed into thehollow space within the profile toform a secure fastening for the hid-den bracket by means of the fixingscrew.
In this arrangement, material is in-troduced only where it is needed,to save weight. Surface contactsare transmitted from the centrepoint to peripheral areas to increa-se mechanical strength.
Large-area contact between theprofile and the slot stones
Clearance toaccommodate rever-
sing dynamic stresses (tempera-ture, vibration) and for the clam-ping effect
Large-area contact to assist au-tomatic alignment of theprofiles to each other
Flush-fitting without any unne-cessary or protruding fasteners
The square bracket section ser-ves as a centring and anti-twistelement
The clearance between thethread insert and the hidden
bracket takes up dynamic re-versing stresses. Material pai-ring: steel / aluminium
Fixing screw / spring clip for ac-curate alignment of theconnection
Steel thread insert, hardened,self-tapping, with hexagonal so-cket for tightening with an allenwrench
Tightening recess
Guide and centring shoulder
Threaded through hole forhidden bracket fixing screw
1 2 3 4 5 6
7 8 9 10 11
2 Nutensteine Foder 1 Nutenst. L
2 slot stones F
or 1 slot stone L
GewindeeinsatzThread insert
SpannbügelHidden bracket
Rechtwinklige VerbindungenRight-angle Connections
II - 43
Der Spannbügel und das multifunk-tional gestaltete Profil gewährleis-ten eine sichere,
Verbindung, die esermöglicht, Belastungen optimalin das Profil einzuleiten.
Die Kompensation von dynami-schen Wechselbeanspruchungen(Temperaturwechsel/Vibration)wird bei der Werkstoffpaarungvon Stahl und Aluminium weitest-gehend durch die freien Federlän-gen der Stahlschrauben erreicht.
Diese sind so abgestimmt, dass eineBeanspruchung der Schraubenka-näle im Aluminium sekundär ein-tritt.
Spanräume
Durchgangsloch für handelsübli-che DIN-Schrauben und einsteck-bares Zubehör
Nut zur Aufnahme von Befesti-gungselementen und Zubehörmit bündigem Abschluss
Die Nutengeometrie erlaubtdas Einschwenken der Nu-tensteine an beliebiger Stelle
Formsteife Gestaltung zur Einlei-tung von Querkräften undBiegemomenten (Formstei-figkeit durch kurzen Hebelarm)
Hidden brackets and the mul-ti-functional profile form a secure
connec-tion which creates optimum condi-tions for transmitting loads.
Dynamic loads (due to tempera-ture changes / vibrations) are com-pensated / absorbed by theunsupported flexible lengths ofsteel bolts combining steel andaluminium.
Mechanical stresses are reduced byoptimum design, which ensuresthat only secondary stresses occur at
the bolting grooves in the alumini-um section.
Machined spaces
Through hole for standard DINscrews and plug-in accessories
Slot for fastening elements andflush-fitting accessories
The geometry of the slot allowsthe slot stones to lock in anydesired position
Rigid form controls transverseforces and bending moments(rigidity of form achieved by ashort lever arm).
ProfilProfile
Spannbügel
Hidden bracket
Nutenstein
Slot stone
1 2 3 4 5
II - 44
Spannbügelverbindung mit Nutenstein -L-Hidden bracket connection with slot stone -L-
Spannbügel mit Stahlge-windeeinsatz anwendbar fürS-Profile Seite 6 bis 8.Hier dargestellt die Verbin-dung zweier S-Profile.
Stahl-Gewindeeinsatz mit ei-nem Innensechskantschlüsseleindrehen. Schneidöl erleich-tert das Einschrauben und derGebrauch einer Bohrmaschi-ne beschleunigt das Eindre-hen.Einschraubtiefe: ca. 20 mm
Spannbügel mit Vierkant inS-Profil 1 einsetzen und mitInnensechskantschraube fest-ziehen - durch Vierkantselbstzentrierend und ver-drehgesichert.
Nutenstein(e) in das S/F-Profil 2einlegen/einschwenken undan gewünschte Position ver-schieben (bei Nutenstein -L-durch Anziehen des Gewin-destiftes festsetzen).
S-Profil 1 und S/F-Profil 2 zu-sammenfügen und mit zweiBefestigungsschrauben denSpannbügel und Nutensteinverbinden.
Kreuzbarkeit zwischen Profi-len mit Spannbügelverbin-dung und Profilen mitFlanschleistenverbindung istdurch einheitliche Nutengeo-metrie aller RK-Nutenprofilegewährleistet.
S-Profil 1* Spannbügelsatz S/F-Profil 2*S-profile 1* Hidden bracket set S/F-profile 2*
*S-Profil: Profil für SpannbügelverbindungF-Profil: Profil für Flanschleistenverbindung
*S-profile for hidden bracket connectionF-profile for flange bracket connection
Rechtwinklige VerbindungenRight-angle Connections
II - 45
Spannbügelverbindung mit Federnutenstein -F-Hidden bracket connection with slot stone -F-
Hidden bracket with steel in-sert usable for profiles S onpages 6 to 8.The connection of twoS-profiles is shown here.
Steel insert is screwed in withan allen wrench. Cutting oilassists this and a drill with at-tachments speeds the pro-cess.Depth of thread engage-ment: approx. 20 mm
Attach hidden bracket andtighten with allen wrench.The connection isself-centring and torsionallysecured due to the square lo-cation.
Insert slot stone(s) in theS/F-profile 2 and slide into thedesired position (in case ofslot stone -L- fix with grubscrew).
Put profile S 1 and profile S/F 2together and connect hiddenbracket and slot stones withtwo fixing screws.
The possibility of intercon-necting profiles with hiddenbracket connection and pro-files with flange bracket con-nection is guaranteed due tothe standardized slot geome-try of RK profiles.
S-Profil 1* Spannbügelsatz S/F-Profil 2*S-profile 1* Hidden brakcet set S/F-profile 2*
*S-Profil: Profil für SpannbügelverbindungF-Profil: Profil für Flanschleistenverbindung
*S-profile for hidden bracket connectionF-profile for flange bracket connection
II - 46
Spannbügelsatz Hidden bracket set
4.006500 S-30 an 30er Nutgeometrie to slot geometry 30 6 50 1200 50 3500 1400
4.006501 S-30 an 40er Nutgeometrie to slot geometry 40 6 50 1200 50 3500 1400
4.016500 S-40 an 40er Nutgeometrie to slot geometry 40 6 130 2000 80 7500 3500
4.026500 S-60 an 40er Nutgeometrie to slot geometry 40 8 230 2400 200 7000 5300
4.036500 S-40x80-1 an 40er Nutgeometrie to slot geometry 40 7 250 2500 100 7500 2600
4.036501 S-40x80-2 an 40er Nutgeometrie to slot geometry 40 7 200 2500 430 11000 5700
4.046500 S-80 an 40er Nutgeometrie to slot geometry 40 8 520 4800 470 13000 9000
4.006700 S-30 an 30er Nutgeometrie to slot geometry 30 6 50 1100 40 4100 2300
4.006701 S-30 an 40er Nutgeometrie to slot geometry 40 6 50 1100 40 4100 2300
4.016700 S-40 an 40er Nutgeometrie to slot geometry 40 6 120 1700 90 6200 2300
4.116700 S-R 40 an 40er Nutgeometrie to slot geometry 40 7 – – – – –
4.036700 S-40x80-1 an 40er Nutgeometrie to slot geometry 40 7 250 1700 110 6500 3000
4.036701 S-40x80- 2 an 40er Nutgeometrie to slot geometry 40 7 230 2800 380 11200 6400
4.046700 S-80 an 40er Nutgeometrie to slot geometry 40 8 470 4200 375 13500 5800
The hidden bracket is the easiestand most economic way of connec-ting profiles without any additio-nal machining being required.Very little constructional work isnecessary because only a profilecutting list has to be prepared, noworking drawing etc. is needed.The connection can be detached atany time and reused. Profiles canbe inserted and securely connectedin every desired position.
z.B. e.g. 40 z.B. e.g. 40x80- 21 Spannbügel 2 Spannbügel1 hidden bracket 2 hidden brackets
*Beschreibung der Nutgeo-metrien siehe I-Seite 22
*for description of slotgeometries see chp. I-p. 22
SpannbügelHidden bracket
ProfilquerschnittProfile section
Spannbügel mit Nutenstein -L-Hidden bracket with slot stone -L-
Spannbügel mit FedernutensteinHidden bracket with slot stone -F-
Anzahl der Spannbügel zur vollständigenMontage zweier rechteckiger Profile.Hidden brackets necessary for the comp-plete assembly of 2 rectangular profiles
z.B. e.g. 40x80-1 z.B. e.g. 801 Spannbügel 2 Spannbügel1 hidden bracket 2 hidden brackets
Der Spannbügel ist die einfachsteund wirtschaftlichste Methodezum Verbinden von Profilen, ohnedass eine zusätzliche Bearbeitungerforderlich ist. Der Konstruktions-aufwand ist sehr gering, weil nureine Profilzuschnittliste, keine Fer-tigungszeichnung etc. erstellt wer-den muss. Die Verbindung istjederzeit wieder lösbar und erneuteinsetzbar. Die Profile können anbeliebiger Position eingefügt undverschraubt werden.
Rechtwinklige VerbindungenRight-angle Connections
II - 74
Verbindungsknoten 2x40 Frame joint 2x40
Al Mg Si 0,5 hell eloxiert.Abdeckkappen PA schwarz.Verbindungsknoten mit 3 An-schlussmöglichkeiten 40x40 und/oder 40x80 um je 45° versetzt.Komplett mit Befestigungssatz.
4.155650 40 40 40 40 68
4.155651 40x80 40 80 40 68
Verbindungsknoten 3x40 Frame joint 3x40
Al Mg Si 0,5 hell eloxiert.Abdeckkappen PA schwarz.Verbindungsknoten mit 2 An-schlussmöglichkeiten 40x40 und/oder 40x80 um je 45° versetzt.Komplett mit Befestigungssatz.
• Bei freitragenden Längen unddynamischen Wechselbeanspru-chungen sollten aufgrund derWerkstoffpaarung Stahl / Alumi-nium versteifende Elementehinzugefügt werden.
• Dies können Knotenwinkel, Kno-tenbleche und Querstrebenprofi-le wie bei Fachwerken üblich sein.
4.255650 40 40 40 40 96,6
4.255651 40x80 40 80 40 96,6
Knotenwinkel (s. Seite 62-63)Angle brackets (see p. 62-63)
UntergurtBottom rail
3x40
ObergurtTop rail 2x40
Zug- undDruckstäbe
Befestigungssatz:Zyl.-Schraube M6x12, DIN7984
Sicherungsscheibe, Nutenstein -N-Fixation set:
Cylinder screw M6x12, DIN7984washer, slot stone -N-
Al Mg Si 0.5 anodized na-tural colour. End caps PA black.Joints with 2 connection possibili-ties - 40x40 and/or 40x80 to be as-sembled at 45°.Complete with fixation set.
Befestigungssatz:Zyl.-Schraube M6x12, DIN7984
Sicherungsscheibe, Nutenstein -N-Fixation set:
Cylinder screw M6x12, DIN7984washer, slot stone -N-
Al Mg Si 0.5 anodized na-tural colour. End caps PA black.Joints with 3 connecting possibili-ties - 40x40 and/or 40x80 to be as-sembled at 45°.Complete with fixation set.
• In the case of self-supportingconstructions and dynamic loads,bracing elements should be useddue to the combination St/Al
• These could be angle brackets,bracing plates, and cross beams asfor truss constructions.
Tension /Pressure strut
WinkelverbindungenAngle Connections
[mm]
[mm]
II - 86
Stahl galvanisiert.Der Nutenstein lässt sich in die Pro-filnut einschwenken / einsetzenund mit einer Feder an beliebigerPosition fixieren.
Nutenstein -K- (kurz) Slot stone -K- (short)
4.006211 M5 alle (außer S-60, s.S.8) all (except S-60, s.p.8) 21 12 4 7 M5 5000
4.006212 M6 alle (außer S-60, s.S.8) all (except S-60, s.p.8) 21 12 4 7 M6 5000
4.006213 M8 alle (außer S-60, s.S.8) all (except S-60, s.p.8) 21 12 4 7 M8 5000
4.016212 M6 40er Nutgeometrie Slot geometry 40 21 14 4 7 M6 5000
4.016213 M8 40er Nutgeometrie Slot geometry 40 21 14 4 7 M8 8000
Nutenstein -K- als Potentialausgleich Slot stone -K- for equipotential bonding
Die untenstehenden Nutensteinebieten die Möglichkeit, in Verbin-dung eines Spannbügel- bzw.Flanschleistensatzes, einen Poten-tialausgleich zwischen zwei Profi-len herzustellen.
DIN 913
Ein Nutenstein wird beim Verbin-dungssatz durch den Nutenstein-K- ausgetauscht. Der Gewinde-stift beschädigt die Eloxalschicht
ein Potentialausgleich wird her-gestellt.
austauschenreplace
4.006214 M5 alle (außer S-60, s.S.8) all (except S-60, s.p.8) 21 12 4 7 M5 5000
4.006215 M6 alle (außer S-60, s.S.8) all (except S-60, s.p.8) 21 14 4 7 M6 5000
galvanized steelThe slot stone can be inserted intothe profile slot and retained with aspring clip in any position.
Used for earthing in combinationwith a hidden bracket or flangebracket set.
One slot stone in the connectionset is replaced by a slot stone -K-.The threaded pin damages theanodized layer.
Nutensteine, Schrauben und ZubehörSlot Stones, Screws, and Accessories
[mm]
[mm]
II - 112
Anschlussplatte für Stützfüße Connecting plate for foot GK Al Si 12 Cu gleitge-schliffen und Al Mg Si 0,5.Anschlussplatte mit Gewindeboh-rung für Stellfüße. Auch zur Auf-nahme von Ringschrauben geeig-net. Der Bestellsatz beinhaltet 4 Zy-linderschrauben.
Vergl. nebenstehende Tabelle
(1) GK Al Si 12 Cu (2) GK Al Si 12 Cu
(3) GK Al Si 12 Cu (4) Al Mg Si 0,5
4.004402 S-30 M6 1 30 30 21 21 6 M6 –
4.004403 S-30 M8 1 30 30 21 21 6 M8 –
4.305402 F-30x60 M6 4 30 60 21,5 48 15 M6 –
4.305403 F-30x60 M8 4 30 60 21,5 48 15 M8 –
4.295402 F-30x100 M6 4 30 100 21,5 88 15 M6 –
4.295403 F-30x100 M8 4 30 100 21,5 88 15 M8 –
4.295404 F-30x100 M10 4 30 100 21,5 88 15 M10 –
4.295405 F-30x100 M12 4 30 100 21,5 88 15 M12 –
4.114402 S-R 40 M8 2 40 40 28 28 7 M8 R 37
4.114403 S-R 40 M10 2 40 40 28 28 7 M10 R 37
4.114404 S-R 40 M12 2 40 40 28 28 7 M12 R 37
GK Al Si 12 Cu ground andAl Mg Si 0.5.Connecting plate with threadedbore for feet. It can also be used forthe fixation of eyebolts. The fi-xation set includes 4 cylinderscrews.
See table next page
Stützfüße, Räder und ZubehörFeet, Castors, and Accessories
Stellfüße und Ringschraubensiehe Seite 111
For feet and eyeboltssee page 111
[mm]
II - 113
4.014402 S-40 M8 1 40 40 28 28 7 M8 –
4.014403 S-40 M10 1 40 40 28 28 7 M10 –
4.014404 S-40 M12 1 40 40 28 28 7 M12 –
4.034404 S-40x80 M8 4 40 80 28 68 7 M8 –
4.034402 S-40x80 M10 4 40 80 28 68 7 M10 –
4.034403 S-40x80 M12 4 40 80 28 68 7 M12 –
4.655402 F-40x160 M8 4 40 160 28 148 15 M8 –
4.655403 F-40x160 M10 4 40 160 28 148 15 M10 –
4.655404 F-40x160 M12 4 40 160 28 148 15 M12 –
4.655405 F-40x160 M16 4 40 160 28 148 15 M16 –
4.085401 F-50 M8 1 50 50 38 38 7 M8 –
4.085402 F-50, F-50-L M10 1 50 50 38 38 7 M10 –
4.665402 F-50x100 M8 4 50 100 38 88 15 M8 –
4.665403 F-50x100 M10 4 50 100 38 88 15 M10 –
4.665404 F-50x100 M12 4 50 100 38 88 15 M12 –
4.665405 F-50x100 M16 4 50 100 38 88 15 M16 –
4.675402 F-50x200 M8 4 50 200 38 188 15 M8 –
4.675403 F-50x200 M10 4 50 200 38 188 15 M10 –
4.675404 F-50x200 M12 4 50 200 38 188 15 M12 –
4.675405 F-50x200 M16 4 50 200 38 188 15 M16 –
4.024405 S/F-60 M8 1 60 60 43/48 43/48 7 M8 –
4.024402 S/F-60 M10 1 60 60 43/48 43/48 7 M10 –
4.024403 S/F-60 M12 1 60 60 43/48 43/48 7 M12 –
4.224402 F-60-L M8 1 60 60 48 48 7 M8 –
4.224403 F-60-L M10 1 60 60 48 48 7 M10 –
4.065402 F-60x120 M10 4 120 60 108 48 15 M10 –
4.065403 F-60x120 M12 4 120 60 108 48 15 M12 –
4.065404 F-60x120 M16 4 120 60 108 48 15 M16 –
4.044404S/F-80,F-80-L M10 1 80 80 68 68 8 M10 –
4.044405 S/F-80,F-80-L
M12 1 80 80 68 68 8 M12 –
4.044402S/F-80,F-80-L
M16 1 80 80 68 68 8 M16 –
4.044403 S/F-80,F-80-L
M20 1 80 80 68 68 8 M20 –
4.685402 F-80x120 M10 4 80 120 68 108 15 M10 –
4.685403 F-80x120 M12 4 80 120 68 108 15 M12 –
4.685404 F-80x120 M16 4 80 120 68 108 15 M16 –
4.685405 F-80x120 M20 4 80 120 68 108 15 M20 –
4.075403 F-80x160 M12 4 160 80 148 68 15 M12 –
4.075404 F-80x160 M16 4 160 80 148 68 15 M16 –
4.075405 F-80x160 M20 4 160 80 148 68 15 M20 –
4.695402 F-100x100 M10 1 100 100 88 88 15 M10 –
4.695403 F-100x100 M12 1 100 100 88 88 15 M12 –
4.695404 F-100x100 M16 1 100 100 88 88 15 M16 –
4.695405 F-100x100 M20 1 100 100 88 88 15 M20 –
4.164402 F-120x120 M10 1 120 120 80 80 15 M10 –
4.164403 F-120x120 M12 1 120 120 80 80 15 M12 –
4.164404 F-120x120 M16 1 120 120 80 80 15 M16 –
[mm]