®
Antriebstechnik ⋅ Hydraulik-Komponenten ⋅ Ölkühler Power Transmission Engineering ⋅ Hydraulik-Components ⋅ Oil-coolers
Rahmer + Jansen GmbH Friedrichstraße D-58791 Werdohl
Telefon + 49 (0) 23 92 / 5 09-0 Fax + 49 (0) 23 92 / 509 509E-Mail: [email protected] ⋅ www.raja.de
© Rahmer + Jansen GmbH Technische Änderungen vorbehalten
Technical changes preserved
Seite 1/1Page 1/1
Ausgabe 05 / 01Edition 05 / 01
Kühlaggregat CPR
Öl-Luft-Kühlaggregate, Serie CPR Oil-Air-Cooler-Units, Series CPR
• Kühl/Filtereinheit im Bypass-Betrieb • Die geräuscharme Lösung mit Radiallüfter • Geräuschpegel < 70 dB(A) bei 1 m Abstand • Kühlleistungsbereich 2 — 20 kW bei ∆∆∆∆t 40 K • Mit Umwälzpumpe, auch mit Hydraulikfilter • Cooling/filtration unit for bypass • The silent solution with radial fan • Noise level < 70 dB(A) at 1 m distance • Cooling range 2 — 20 kW at ∆∆∆∆t 40 K • With circulation pump, also with hydraulic filtration unit
®
Antriebstechnik ⋅ Hydraulik-Komponenten ⋅ Ölkühler Power Transmission Engineering ⋅ Hydraulik-Components ⋅ Oil-coolers
Rahmer + Jansen GmbH Friedrichstraße D-58791 Werdohl
Telefon + 49 (0) 23 92 / 5 09-0 Fax + 49 (0) 23 92 / 509 509E-Mail: [email protected] ⋅ www.raja.de
© Rahmer + Jansen GmbH Technische Änderungen vorbehalten
Technical changes preserved
Seite 2/2Page 2/2
Ausgabe 05 / 01Edition 05 / 01
Kühlaggregat CPR
Typenbezeichnung - Model type C P R - P - F - 2 - 4 - 2 8 - 2 / 1 0 - L P F 1 6 0
Öl-Luftkühler Filtertype Oil-Air-Cooler
CPR Type of Filter
Öl-Luftkühler mit Pumpe*** Oil-Air-Cooler with pump***
CPR-P
CPR-P-F-0 CPR-P-F-1 CPR-P-F-2 CPR-P-F-3
Öl-Luftkühler mit Pumpe und Filter Oil-Air-Cooler with pump and filter
CPR-P-F
LF 60 MF 160
LPF 160 MF 160
LPF 160 MF 180
*** Standardausführung, ab Lager lieferbar Filtermaterial und Filterfeinheit *** Standardversion, delivery ex stock Material of filter and filtration rating Drahtgewebe
Kühlertype Wire mesh 1 25 µm
Type of cooler Betamicron-3-N**
0 1 2 3 Betamicron-3-N** 2 3
10 µm 20 µm
LF 60 LPF 160
Papier
Lüfterdrehzahl Paper 4 10 µm
MF 160 MF 180
Rotation of radial fan 1000 1/min 1500 1/min
6 4 **Betamicron-3-N, 10 µµµµm Standardausführung **Betamicron-3-N, 10 µµµµm standardversion
Fördervolumen cm3/U Flow cm3/rev
CPR-P-0 CPR-P-1
CPR-P-2 CPR-P-3
CPR-P-2 CPR-P-3
10 28 40
Kenngrößen - Technical details
Kühlertype Type of cooler
Kühlleistung Cooling cpacity P [kW]
∆∆∆∆t = 40K
Betriebsdruck Operating pressure
p max [bar]
Öldurchfluß Q max Oil flow [l/min]
Theoretische Fördermenge
Oil flow Q [l/min]
Viskosität max Viscosity max.
[mm2/s]
Polzahl/BG No. of poles/ Size of motor
Motorleistung Motor capacity
P [kW]
Luftdurchsatz Air flow rate
[m3/h]
Schallpegel Noise level
[dB(A)]
CPR-0-4 3,0 16 70 --- 2000 4 — 63 0,18 340 65
CPR-P-0-4 2,05 6 --- 15 180 4 — 71 0,37 340 68
CPR-1-6 5,2 16 70 --- 2000 6 — 71 0,25 430 54
CPR-1-4 6,4 16 70 --- 2000 4 — 71 0,25 640 61
CPR-P-1-6 3,8 6 --- 10 180 6 — 71 0,25 430 57
CPR-P-1-4 5,0 6 --- 15 180 4 — 71 0,37 640 65
CPR-2-6 8,6 16 100 --- 2000 6 — 80 0,37 730 60
CPR-2-4 10,6 16 100 --- 2000 4 — 80 0,55 1200 69
CPR-P-2-6 7,4 6 --- 28 180 6 — 90 1,1 730 66
CPR-P-2-6 7,6 6 --- 40 180 6 — 90 1,1 730 66
CPR-P-2-4 9,6 6 --- 42 180 4 — 90 1,5 1200 74
CPR-P-2-4 10,2 6 --- 60 180 4 — 90 1,5 1200 74
CPR-3-6 13,4 16 100 --- 2000 6 — 80 0,55 1700 66
CPR-3-4 18,0 16 100 --- 2000 4 — 80 0,55 2500 75
CPR-P-3-6 11,4 6 --- 28 180 6 — 90 1,1 1700 68
CPR-P-3-6 12,6 6 --- 40 180 6 — 90 1,1 1700 68
CPR-P-3-4 16,6 6 --- 42 180 4 — 90 1,5 2500 76
CPR-P-3-4 17,4 6 --- 60 180 4 — 90 1,5 2500 76
Standard-Spannungen und Frequenzen bei Drehstrommotoren 380-420 V (Y) / 220-240 V (∆) — 50 Hz Standard-Voltages and frequencies for three-phase-motors 440-480 V (Y) / 254-277 V (∆) — 60 Hz
®
Antriebstechnik ⋅ Hydraulik-Komponenten ⋅ Ölkühler Power Transmission Engineering ⋅ Hydraulik-Components ⋅ Oil-coolers
Rahmer + Jansen GmbH Friedrichstraße D-58791 Werdohl
Telefon + 49 (0) 23 92 / 5 09-0 Fax + 49 (0) 23 92 / 509 509E-Mail: [email protected] ⋅ www.raja.de
© Rahmer + Jansen GmbH Technische Änderungen vorbehalten
Technical changes preserved
Seite 3/3Page 3/3
Ausgabe 05 / 01Edition 05 / 01
Kühlaggregat CPR
Spezifische Kühlleistung in Abhängigkeit vom Öldurchfluß Q und der Temperaturdifferenz ∆∆∆∆t=1K (Öleintritt zu Lufteintritt) Specific cooling capacity depending on oil flow Q and the temperature difference ∆∆∆∆t=1K (Oil inlet and air inlet)
Sp
ezif
isch
e K
üh
lleis
tun
g P
/∆t
[W/K
] S
pec
ific
co
olin
g c
apac
ity
P/ ∆∆ ∆∆
t [W
/K]
Diagramm 1 Graph 1
Durchflußmenge Q [l/min] Oil flow Q [l/min]
Durchflußwiderstand des Kühlelementes bei einer Ölviskosität von 32 mm2/s
Pressure drop of cooler matrix at the oilviscosity of 32 mm2/s
cSt k
10 0,5
15 0,64
22 0,73
32 1,0
46 1,3
68 1,9
Du
rch
flu
ßw
ider
stan
d ∆∆ ∆∆
p [
bar
]
Pre
ssu
re d
rop
∆∆ ∆∆p
[b
ar]
100 2,7
Durchflußmenge Q [l/min] Oil flow Q [l/min]
Ko
rrek
turf
akto
r k
für
∆∆ ∆∆p
-Wer
te b
ei u
nte
rsch
ied
lich
en V
isko
sitä
ten
C
orr
ecti
on
fac
tor
k fo
r ∆∆ ∆∆
p v
alu
es a
t va
ryin
g v
isco
siti
es
150 4,0
0,00
0,20
0,40
0,60
0,80
1,00
1,20
1,40
1,60
0 10 20 30 40 50 60 70 80 90 100 110 120 130
CPR1 CPR2CPR3
CPR0
0
50
100
150
200
250
300
350
400
450
500
5 10 20 30 40 50 60 70 80 90 100
CPR-3-4
CPR-3-6
CPR-2-4
CPR-2-6
CPR-1-4
CPR-1-6
CPR-0-4
®
Antriebstechnik ⋅ Hydraulik-Komponenten ⋅ Ölkühler Power Transmission Engineering ⋅ Hydraulik-Components ⋅ Oil-coolers
Rahmer + Jansen GmbH Friedrichstraße D-58791 Werdohl
Telefon + 49 (0) 23 92 / 5 09-0 Fax + 49 (0) 23 92 / 509 509E-Mail: [email protected] ⋅ www.raja.de
© Rahmer + Jansen GmbH Technische Änderungen vorbehalten
Technical changes preserved
Seite 4/4Page 4/4
Ausgabe 05 / 01Edition 05 / 01
Kühlaggregat CPR
Abmessungen - Dimensions
Anschluß AKConnection AK
CPR CPR-P; CPR-P-F Pumpentyp (cm³/U) Pump type (cm³/U)
1-6 / 1-4 -----
2-6 / 2-4 -----
3-6 / 3-4 -----
1-6 / 1-4 10
2-6 / 2-4 10 / 28
3-6 / 3-4 28 / 40
BF ----- ----- ----- 475 530 595B 345 385 450 345 385 450 BA ±1 285 300 360 285 300 360 BC 80 80 80 80 80 80 BM ±2 172,5 192,5 225 172,5 192,5 225 L ges. ±10 505 550 680 580 665 800 L 360 430 500 360 430 500 LA ±1 320 392 470 320 392 470 LK ±2 47,5 47,5 51,5 47,5 47,5 51,5 H ±2 375 470 530 375 470 530 HM ±2 150 180 225 150 180 225 K ±5 289 389 439 289 389 439 C ±2 50,5 50,5 55,5 50,5 50,5 55,5 F 30 40 40 30 40 40 S ±2 15 20 20 15 20 20 D 15 15 10 15 15 10 Ø G 9 9 9 9 9 9 P min. 200 250 300 200 250 300 R min. 150 200 250 150 200 250 E ----- ----- ----- 45 100 100 AP ----- ----- ----- G ½“ G 1 ¼“ G 1 ¼“
®
Antriebstechnik ⋅ Hydraulik-Komponenten ⋅ Ölkühler Power Transmission Engineering ⋅ Hydraulik-Components ⋅ Oil-coolers
Rahmer + Jansen GmbH Friedrichstraße D-58791 Werdohl
Telefon + 49 (0) 23 92 / 5 09-0 Fax + 49 (0) 23 92 / 509 509E-Mail: [email protected] ⋅ www.raja.de
© Rahmer + Jansen GmbH Technische Änderungen vorbehalten
Technical changes preserved
Seite 5/5Page 5/5
Ausgabe 05 / 01Edition 05 / 01
Kühlaggregat CPR
Abmessungen - Dimensions
Anschluß AKConnection AK
CPR ; CPR-F CPR-P; CPR-P-F Pumpentyp (cm³/U) Pump Type (cm³/U)
0-4 -----
0-4 10
H ±2 370 370 L ges. ±10 320 400 B 335 335 LA ±1 205 205 BA ±1 285 285 L 225 225 K ±5 242 242 C ±2 42,5 42,5 HA ±2 337 337 HM ±2 160 160 BM ±2 135 135 T ±2 105 105 R min. 100 100 P min 130 130 D 37 37 AP ----- G ½“ G 9 9
®
Antriebstechnik ⋅ Hydraulik-Komponenten ⋅ Ölkühler Power Transmission Engineering ⋅ Hydraulik-Components ⋅ Oil-coolers
Rahmer + Jansen GmbH Friedrichstraße D-58791 Werdohl
Telefon + 49 (0) 23 92 / 5 09-0 Fax + 49 (0) 23 92 / 509 509E-Mail: [email protected] ⋅ www.raja.de
© Rahmer + Jansen GmbH Technische Änderungen vorbehalten
Technical changes preserved
Seite 6/6Page 6/6
Ausgabe 05 / 01Edition 05 / 01
Kühlaggregat CPR
Kühlerauswahl - Cooler selection Formelzeichen - Formular PV [kW] Kühlleistung Cooling capacity P/∆∆∆∆t [W/K] Spezifische Kühlleistung Specific cooling capacity V [l] Tankinhalt volume of tank ρ [kg/dm3] Dichte Öl Density ol oil C [kJ/kg K] Spezifische Wärmekapazität Öl Specific heat capacity of oil ∆∆∆∆T [K] Temperaturerhöhung im Öl Temperature increase of oil t [min] Betriebszeit Operating time T1 [°C] Empfohlene Öltemperatur Desired oiltemperature T2 [°C] Lufttemperatur Ambient temperature ∆∆∆∆t [°C] Temperaturdifferenz Öl ein / Luft ein Temperature difference Oil inlet / Air inlet Beispiel 1 Messen der Verlustleistung bei bereits in Betrieb befindlichen Anlagen. Es wird die Temperaturerhöhung des Öles in einem bestimmten Zeitabschnitt gemessen. Daraus läßt sich mit weiteren Parametern die notwendige Kühlleistung ermitteln. Messergebnis: Temperaturerhöhung 40°C Betriebszeit 2 Stunden Tankinhalt 400 Liter Empfohlene Öltemperatur 65°C Umgebungstemperatur 25°C
Example 1 Measurement of the necessary cooling capacity on working hydraulic units. You have to measure the increase of oil temperture over a certain period. The necessary cooling capacity can be caculated with other parameters and the temperature increase of oil. Results of measurement: Temperature increase of oil 40°C Operating time 2 hours Volume of tank 400 liters Desired oiltemperature 65°C Ambient temperature 25°C
∆∆∆∆T x CÖl x ρÖl x V ∆∆∆∆T x CÖl x ρÖl x V PV =
t x 60 PV =
t x 60 40 x 1,93 x 0,865 x 400 40 x 1,93 x 0,865 x 400
PV = 120 x 60
PV = 120 x 60
PV = 3,71 kW PV = 3,71 kW
∆∆∆∆t = T1 — T2 = 65 — 25 = 40°C ∆∆∆∆t = T1 — T2 = 65 — 25 = 40°C
3,71 x 1000 3,71 x 1000
P/∆∆∆∆t = 40
P/∆∆∆∆t = 40
P/∆∆∆∆t = 92,75 W/K (notwendige spez. Kühlleistung) P/∆∆∆∆t = 92,75 W/K (necessary spec. cooling capacity) Aus Gründen der Ölverschmutzung Erhöhung des ermittelten You have to increase the calculated value with a 10% safety Wertes um 10%. margin about oil contamination.
P/∆t = 92,75 x 1,1 = ~ 102 W/K P/∆∆∆∆t = 92,75 x 1,1 = ~ 102 W/K Auswahl des einzusetzenden Kühlers CPR-P- 1-4-10 zur Ne- Determination type of cooler CPR-P-1-4-10 for bypass- benstromkühlung aus Diagramm 1, Seite 3. cooling acc. Graph 1, page 3. Beispiel 2 Schätzen der Verlustleistung bei gewöhnlichen Hydraulikanlagen (ohne zusätzliche Drosselung), in dem man 15-20% der installierten Antriebsleistung ansetzt.
Example 2 The necessary cooling capacity on normal hydraulic units (with unrestricted oil flow) has to be estimated. You have to calculate 15 to 20% of the installed drive power.
Installierte Antriebsleistung 22 kW Installed drive power 22 kW Geschätzte Verlustleistung 15% von 22 kW = 3,3 kW Estimated cooling capacity 15% of 22 kW = 3,3 kW Ermittlung der notwendigen spezif. Kühlleistung und Auswahldes Kühlers wie unter Beispiel 1 beschrieben.
Calculation of spec. cooling capacity and determination type of cooler according above mentioned example no. 1.