2
Copyright © LAEUFER International AG 2008 - All rights reserved
3
6.1 DMV Molchsystem6.2 SMV Molchsystem
7.1 Rückschlagventile 7.2 Drehrohre 7.3 Sichtgläser 7.4 Teleskoprohre
8.1 Scheibenventile8.2 Kugelventile
6.1 DMV Pigging System6.2 SMV Pigging System
7.1 Non Return Valves7.2 Swivel Joint Union (Turn Pipe)7.3 Sight Glasses7.4 Telescope Pipes
8.1 Butterfly Valves8.2 Ball Valves
4
Sterilarmaturen und Molchsysteme von Laeufer International AG – kurz LIAG – bieten bei der Verarbeitung hochwertiger Medien in keimarmen Verfahren ein Höchstmaß an Qualität und Prozess- sicherheit.
Sterile armatures and pigging systems from Laeufer International AG – LIAG in short – offer the maximum in quality and product safety for the low-germ processing of high-grade media.
Aus der Praxis. Für die Praxis! Langjährige Erfahrung in der Prozesstechnik und konse-quente Kundenorientierung sind die Basis innovativer Technologien und individuell abgestimmter Systemlösungen.
Maximale Prozesssicherheit und Wirtschaft-lichkeit stehen dabei im Vordergrund.
Developed from field experience – for field use! Many years of experience in process engineering and a consistent focus on customer demands are the basis of innova-tive technologies and customized system solutions.
Our primary focus is on maximum process safety and economic efficiency.
5
Ein durch alle Fertigungsabläufe optimier-tes Qualitätssicherungssystem garantiert höchstes Niveau; gleichzeitig setzen wir auf Baukastensysteme und Flexibilität in der Produktion.
A quality assurance system, which is opti-mized through all production steps, ensures the very highest standard; at the same time, we place emphasis on modular systems and production flexibility.
Unser weltweites Vertriebs- und Servicenetzwerk bietet professionelle Betreuung und Beratung zu allen Themen unseres Lieferprogramms.
Our worldwide sales and service network offers professional advice and support on all aspects of our delivery program.
www.laeufer-ag.de
6
LIAG® – LAEUFER International AGDr. Zimmermann-Str. 1888709 Meersburg / Germany
Tel. +49-7532-4326-0Fax +49-7532-4326-53eMail: [email protected]: www.laeufer-ag.de
BENELUX
Montakon B.V.Baronieweg 14 5320 AC Hedel / NetherlandsTel. +31 73-599 60 00 Fax +31 73-599 60 60 eMail: [email protected] Internet: www.montakon.nl
DENMARK
Scanding A/SDjursgade 318500 Grenaa / Denmark Tel. +45 8759 22 22Fax +45 8759 22 23eMail: [email protected] Internet: www.scanding.dk
ESTONIA
AS Spurtfaas Paavli 6a 10412 Tallinn / Estonia Tel. +372 6 602 590Fax +372 6 602 590eMail: [email protected] Internet: www.spurtfaas.ee
FINLAND
LIAG® Sales Office FinlandPL 119 33101 Tampere / Finland Tel. +358 3 253 3520Fax +358 3 253 3523eMail: [email protected] Internet: www.laeufer-ag.de
FRANCE
Sodime S.A12, rue Jules-Verne - Z.A. du Caillou69630 Chaponost / FranceTel. +33 478 56 30 32Fax +33 478 56 27 78 eMail: [email protected]: ww.e-sodime.com
GREAT BRITAIN
HPE Hygienic Process Equipment LTDUnit N2,Gildersome SpurGildersome, MorleyLS27 7JZ Leeds / Great Britain Tel. +44 1132 526712Fax +44 1132 538125eMail: [email protected] Internet: www.hpe.co.uk
IRELAND
Petrochem Pipeline Supply LtdEuro Business ParkLittle IslandCo. Cork / IrelandTel. +353 21 4351300Fax +353 21 4351166eMail: [email protected]: www.petrochem.ie
ITALY
Exonder S.R.L.Via Zanotti 14 28040 Borgoticino (NO) / Italy Tel. +39 0321 90 8466Fax +39 0321 96 2436eMail: [email protected] Internet: www.exondertotalservice.it
NORWAY
ST Løchen ASLjabrubakken 121165 Oslo / Norway Tel. +47 22 28 19 41Fax +47 22 28 55 61eMail: [email protected] Internet: www.stlochen.no
RUSSIA
TechstandartVarschawskoje Schosse, 125117545 Moscow / Russia Tel. +7 495 319 53 89Fax +7 495 319 49 45eMail: [email protected]
SWEDEN
Sveflow ABSollentunavägen 48 -Box 203019140 Sollentuna / Sweden Tel. +46 8 92 80 80Fax +46 8 92 90 89 eMail: [email protected] Internet: www.sveflow.se
SPAIN
Sylcon ingeniería de procesoSirio, 62 Bajo28007 Madrid / SpainTel. +34 91 574 34 06Fax +34 91 573 14 04eMail: [email protected]: www.sylcon.es
TURKEY
Dizayn Mühendislik HizmetleriInönü Cad. Taskur Apt.No:43 D:4 34735 Kadiköy-Istanbul / TurkeyTel. +90 216 355 77 00 01 Fax +90 216 355 77 02eMail: [email protected]: www.dizayneng.com
7
USA
Sudmo North America Inc.1330 Anvil Drive Rockford, IL 61115 / USATel. +1 815 639 0322Fax +1 815 639 1135eMail: [email protected]: www.sudmona.com
MEXICO
Pro Flow S.A. de C.V.Nápoles 83 - 302 Col. Juárez C.P. 06600, México D.F.Tel. +52 55 55 14 11 85Fax +52 55 55 14 12 33eMail: [email protected]
BRAZIL
LIAG® Sales Office BrazilRua Guian, 322 Sl - 2304330-090 São Paulo / BrazilTel. /Fax +55 11 5679 6874 Cel. +55 11 9583 3228eMail: [email protected]: www.liagbras.com.br
SOUTH AFRICA
Forrester de Beer and AssociatesP.O. Box 12674N1 City7463 Western Cape / South AfricaTel. +27 21 555 3343Fax +27 21 555 3747eMail: [email protected]
THAILAND
Geotech Intertrade Co., Ltd.41/288 Moo 12, Nuanchan Rd.,Klongkum, BungkumBangkok 10230 / ThailandTel. +66 2 3637684 5Fax +66 2 3637683eMail: [email protected]
8
für die Getränke-, Lebensmittel- und chemisch-pharmazeutische Industrie
Werkstoff-Nr. nachDIN 17007
AISIStahlsorte nach
DIN 17007 C % Si % Mn % Cr % Mo % Ni % Ti %
1.4301 304 X 5CrNi1810 0,07 1,00 2,00 17,00-19,00 - 8,50-10,50 -
1.4306 304 L X 2CrNi1911 0,03 1,00 2,00 18,00-20,00 - 10,00-12,50 -
1.4404 316 L X2CrNiMo1810 0,03 1,00 2,00 16,50-18,50 2,00-2,50 11,40-14,00 -
1.4435 316 L X 2CrNiMo1812 0,03 1,00 2,00 17,00-18,50 2,50-3,00 12,50-15,00 -
Die produktberührenden Dichtungsqualitäten entsprechen den Bestimmungen des Lebensmittelgesetzes(keine toxischen Basispolymere, Füllstoffe und Lösungsmittel), sowie den Vorschriften der DIN 11861.Für das Ventilprogramm stehen standardmäßig Dichtungen aus EPDM und FPM (Viton®) zur Verfügung.
Andere Dichtungswerkstoffe und Qualitäten mit FDA-Zulassung auf Anfrage.
Alle produktberührenden Teile werden aus porenfreien Walz- oder Schmiedeteilen hergestellt und sind ohne Nachbehandlung schweißbar. Produktberührte Innenflächen sind feingedreht / feingeschliffen. Außenflächen: feingedreht / gebürstet.
Zur einwandfreien Bearbeitung Ihres Auftrages, bitten wir bei Bestellung um folgende Angaben (Beispiel):
Außer den im Katalog aufgeführten Artikeln liefern wir eine Vielzahl von Spezialprodukten und Sonderapplikationen.Beispiele hierfür sind: Kombination verschiedener Anschlussarten, Adaption von Antrieben unterschiedlicher Fabrikate, Sonderkonstruktionen und Herstellung in enger Zusammenarbeit mit unseren Kunden.
DIN 11851
DN Gewinde
25 Rd 52 x 1/6"
40 Rd 65 x 1/6"
50 Rd 78 x 1/6"
65 Rd 95 x 1/6"
80 Rd 110 x ¼"
100 Rd 130 x ¼"
SMS 1145
DN Gewinde
25 (1") Rd 40 x 1/6"
38 (1 ½") Rd 60 x 1/6"
51 (2") Rd 70 x 1/6"
63 (2 ½") Rd 85 x 1/6"
76 (3") Rd 98 x 1/6"
102 (4") Rd 132 x 1/6"
Menge Typ Benennung Werkstoff O-Ring MaterialAusführung Pn.-Antrieb
Option / Typ
7 50D530A213-Wege Bogenventil,
3 x Gewinde DIN 11851
AISI 316L (1.4404)
EPDMLuft/Feder
(LÖ/FS)
Rückmeldeeinheit Näherungsschalter 24V/DC
Typ 25-102M55B
9
for the beverage, food and chemical / pharmaceutical industries
All seals in contact with product meet the German legal requirements for the food industry, as well as the specifications acc. to DIN 11861. These standard seal materials are: EPDM (ethylene-propylene-diene-rubber) and FPM (Viton®).
FDA approved seals and other materials on request.
All parts in contact with product are manufactured in non-porous rolled or forged material being weldable without additional heat treatment. Standard internal surface in contact with product: machined or fine ground.Outside surface: machined / brushed.
In addition to the above mentioned products, we also supply a wide variety of special products and special applications.E.g.: Combination of different types of connection, adaptation of actuators from different manufacture, special designs and manufacture in close cooperation with our customers.
Please state the following details when placing an order (example):
Quantity Type Description Material O-ring materialType of
actuatorOptions / Type
7 50D530A213-way arc valve,
3 x male ends DIN 11851
AISI 316L (1.4404)
EPDMAir/Spring
(NC)
Inductive proximity switch 24V/DC
Type 25-102M55B
Material no.acc. to DIN 17007
AISI
Steel Grade Abreviationacc. to DIN
17007
C % Si % Mn % Cr % Mo % Ni % Ti %
1.4301 304 X 5CrNi1810 0,07 1,00 2,00 17,00-19,00 - 8,50-10,50 -
1.4306 304 L X 2CrNi1911 0,03 1,00 2,00 18,00-20,00 - 10,00-12,50 -
1.4404 316 L X2CrNiMo1810 0,03 1,00 2,00 16,50-18,50 2,00-2,50 11,40-14,00 -
1.4435 316 L X 2CrNiMo1812 0,03 1,00 2,00 17,00-18,50 2,50-3,00 12,50-15,00 -
DIN 11851
DN Thread
25 Rd 52 x 1/6"
40 Rd 65 x 1/6"
50 Rd 78 x 1/6"
65 Rd 95 x 1/6"
80 Rd 110 x ¼"
100 Rd 130 x ¼"
SMS 1145
DN Thread
25 (1") Rd 40 x 1/6"
38 (1 ½") Rd 60 x 1/6"
51 (2") Rd 70 x 1/6"
63 (2 ½") Rd 85 x 1/6"
76 (3") Rd 98 x 1/6"
102 (4") Rd 132 x 1/6"
10
B NBR FPM EPDM FEP PTFE
Baumwollsamenöl A A C A A
Benzoesäure D A B A A
Benzoesäuremethylester D A D A A
Bier A A A A A
Bleichlauge D A A A A
Bromwasserstoffsäure D A A A A
Butanol (Butylalkohol) A A B A A
Butter A A A A A
Buttersäure D B B A A
Buttersäurebutylester D A A A A
Butylalkohol A A B A A
C NBR FPM EPDM FEP PTFE
Calciumchlorid A A A A A
Calciumhydroxid A A A A A
Calciumsalze A A A A A
Carbolsäure (Phenol) D A D A A
Chloraceton D D A A A
Chloressigsäureethylester D A D A A
Chlorhaltiges salziges Meerwasser
D A D A A
Chlorkohlensäureethylester D A D A A
D NBR FPM EPDM FEP PTFE
Dampf unter +150°C D C A A A
Dampf über +150°C D D B A A
Denaturierter Alkohol A A A A A
Diacetonalkohol (Diaceton) D D A A A
E NBR FPM EPDM FEP PTFE
Erdnussöl A A C A A
Essigsäure heiss D D C A A
Ethanol (Ethylalkohol) A C A A A
Ethylalkohol (Ethanol) A C A A A
Ethylchlorid A A A A A
Ethylenchlorid D B D A A
F NBR FPM EPDM FEP PTFE
Fettsäuren B A C A A
Fluorokieselsäure B A A B B
G NBR FPM EPDM FEP PTFE
Gallussäure B A B A A
Gelatine A A A A A
Glucose A A A A A
Glycerin A A A A A
Glycerintriacetat B D A A A
Glycol (Ethylenglykol) A A A A A
K NBR FPM EPDM FEP PTFE
Kaffee A A A A A
Kaliumchlorid A A A A A
Kaliumhydroxid, Kalilauge 50% B D A A A
Kaliumhydroxid-Lösungen (verdünnt)
B B A A A
Kohlensäure B A A A A
Kokosfett A A C A A
L NBR FPM EPDM FEP PTFE
Lacklösungsmittel D D D A A
Lavendelöl B A D A A
Lebertran A A A A A
Leinöl A A C A A
Linolsäure B B D A A
M NBR FPM EPDM FEP PTFE
Maisöl A A C A A
Methan A A D A A
Methylalkohol (Methanol) A D A A A
Milch A A A A A
Milchsäure kalt A A A A A
Milchsäure heiss D A D A A
NBR FPM EPDM FEP PTFE
-30°C bis +100°C
-20°C bis +200°C
-40°C bis +160°C
-60°C bis +200°C
-200°C bis +260°C
bis +130°C bis +230°C bis +180°C bis +230°C bis +300°C
Temperaturbereich
kurzzeitig
A NBR FPM EPDM FEP PTFE
Aceton D D A A A
Acethylchlorid D A D A A
Acetylen, Ethen A A A A A
Acrylsäureethylester D D B A A
Ameisensäuremethylester D D B A A
Ammoniak flüssig (wasserfrei) B D A A A
Ammoniumcarbonat C B A A A
Ammoniumchlorid A A A A A
Ammoniumhydroxid 3 molare Lösung
A B A A A
Ammoniumhydroxid kon-zentriert
D C A A A
Apfelsäure A A B A A
11
N NBR FPM EPDM FEP PTFE
Natriumcarbonat (Soda) A A A A A
Natriumbicarbonat (Natron) A A A A A
Natriumchlorid (Kochsalz) A A A A A
Natriumhydroxid (Natronlau-ge) 3 molar
B B A A A
Natriumnitrat (Natronsalpeter) B A A A A
Natriumperoxid B A A A A
Natriumsalze A A A A A
O NBR FPM EPDM FEP PTFE
Olivenöl A A B A A
Ozon D A A A A
P NBR FPM EPDM FEP PTFE
Pflanzliche Öle A A C A A
Phenol D A D A A
R NBR FPM EPDM FEP PTFE
Rizinusöl A A B A A
Rüböl A A A A A
S NBR FPM EPDM FEP PTFE
Salicylsäure B A A A A
Salpetersäure 3-molar D A B A A
Salpetersäure konzentriert D A D A A
Salzsäure 3-molar C A A A A
Salzsäure konzentriert D A C A A
Schmalz, tierisches Fett A A B A A
Schwefelsäure 3-molar D A B A A
Schwefelsäure konzentriert D A D A A
Schweflige Säure B A B A A
Sojaöl A A C A A
T NBR FPM EPDM FEP PTFE
Teeröl, Carbolineum A A D A A
Tieröl A A B A A
Trichloressigsäure B C B A A
V NBR FPM EPDM FEP PTFE
Vaseline A A D A A
W NBR FPM EPDM FEP PTFE
Wasser (Nutzwasser) bis +70°C A B A A A
Wasser (Nutzwasser) bis +100°C
B B A A A
Wasserdampf über +150°C D D B A A
Wasserstoffperoxid verdünnt B A A A A
Wein und Whiskey A A A A A
Weinsäure A A B A A
Z NBR FPM EPDM FEP PTFE
Zitronensäure A A A A A
Zuckerlösungen A A A A A
Zuckerrohrlösung A A A A A
Zuckerrübensaft A A A A A
Den neben stehenden Angaben liegen Prüfungen bei unterschiedlichen Bedingungen zugrunde. Vielfach sind die Werte jedoch bei Raumtemperatur und 7 Tagen (150Std.) Einwirkungszeit ermittelt worden. In Einzelfällen sind voneinander abweichende Feststellungen Labor/Praxis durchaus möglich.Aufgrund der unterschiedlichen Einsatzparameter und Zusammensetzung der Medien sind diese Angaben nur Richtwerte und unverbindlich.
A beständigB einsetzbar (statisch)C bedingt einsetzbar (Einsatz nicht ratsam)D nicht beständig
12
A NBR FPM EPDM FEP PTFE
Acetic acid hot D D C A A
Acetone D D A A A
Acetyl chloride D A D A A
Acetylene, Ethylene A A A A A
Acrylic acid ethyl ester D D B A A
Ammonia gas, liquid (anhydrous)
B D A A A
Ammonium carbonate C B A A A
Ammonium chloride A A A A A
Ammonium hydroxide 3molar solution
A B A A A
Ammonium hydroxideconcentrated
D C A A A
Animal fat A A B A A
B NBR FPM EPDM FEP PTFE
Beer A A A A A
Benzoic acid D A B A A
Benzoic methyl ester D A D A A
Bleaching lye D A A A A
Butanol (butyl alcohol) A A D A A
Butter A A A A A
Butyl alcohol A A B A A
Butyric acid D B B A A
Butyricester acid D A A A AC NBR FPM EPDM FEP PTFE
Calcium chloride A A A A A
Calcium hydroxide A A A A A
Calcium nitrate (nitrate of lime)
A A A A A
Carbolic acid (phenol) D A D A A
Carbonic acid B A A A A
Castor oil A A B A A
Chloracetone D D A A A
Chloroaceticethylester acid D A D A A
Citric acid A A A A A
Coconut oil A A C A A
Cod liver oil A A A A A
Concentrated nitric acid A A A A A
Cotton seed oil A A C A A
Creosote, carbolineum A A D A A
D NBR FPM EPDM FEP PTFE
Denatured alcohol A A A A A
Diacetone alcohol D D A A A
F NBR FPM EPDM FEP PTFE
Fatty acids B A C A A
Fluoricorthosilicic acid B A A B B
Formic acid methylester D D B A A
G NBR FPM EPDM FEP PTFE
Gallic acid B A B A A
Gelatines A A A A A
Glucose A A A A A
Glycerine A A A A A
Glycerine triacetate B D A A A
Glycol (ethylene glycol) A A A A A
Groundnut oil A A C A A
L NBR FPM EPDM FEP PTFE
Lactic acid cold A A A A A
Lactic acid hot D A D A A
Lavender oil B A D A A
Linoleic acid B B D A A
Linseed oil A A C A A
M NBR FPM EPDM FEP PTFE
Maize oil A A C A A
Malic acid A A B A A
Methane A A D A A
Methyl alcohol (methanol) A D A A A
Milk A A A A A
E NBR FPM EPDM FEP PTFE
Ethanol (ethyl alcohol) A C A A A
Ethyl alcohol (ethanol) A C A A A
Ethyl chloride A A A A A
Ethylenechloride D B D A A
H NBR FPM EPDM FEP PTFE
Hydrobromic acid D A A A A
Hydrochloric acid 3-molar C A A A A
Hydrochloric acid concen-trated
D A C A A
Hydrochlorouscarbonicethyl-ester acid
D A D A A
Hydrogen peroxide dilute B A A A A
NBR FPM EPDM FEP PTFE
-30°C up to 100°C
(-22°F up to +212°F)
-20°C up to 200°C
(-4°F up to +392°F)
-40°C up to 160°C
(-40°F up to +320°F)
-60°C up to 200°C
(-76°F up to +392°F)
-200°C up to 260°C
(-328°F up to +392°F)
up to 130°C (up to
+266°F)
up to 230°C (up to
+446°F)
up to 180°C (up to
+356°F)
up to 230°C (up to
+446°F)
up to 300°C (up to
+572°F)
Range of temperature
Temporary
13
N NBR FPM EPDM FEP PTFE
Nitric acid 3% D A B A A
O NBR FPM EPDM FEP PTFE
Olive oil A A B A A
Ozone D A A A A
P NBR FPM EPDM FEP PTFE
Paint thinners D D D A A
Phenol D A D A A
Potassium chloride A A A A A
Potassium hydroxide caustic potash 50 %
B D A A A
Potassium hydroxide solutions (dilute)
B B A A A
R NBR FPM EPDM FEP PTFE
Rape oil A A A A A
T NBR FPM EPDM FEP PTFE
Tartaric acid A A B A A
Trichloroacetic acid B C B A A
V NBR FPM EPDM FEP PTFE
Vaseline A A D A A
Vegetable oils A A C A A
W NBR FPM EPDM FEP PTFE
Water (for industrial use)up to +100 °C
B B A A A
Water (for industrial use) up to +70 °C
A B A A A
Wine and whisky A A A A A
The information above is based on tests under different conditions. Many of the values have been determined at room temperature with a reaction time of 7 days (150 hours). In individual cases observations may differ between laboratory and practical tests. Because of differences in conditions of use and the composition of fluids the data given are only guidelines and should not be taken as binding.
A stableB can be used (static applications)C limited stability (use not recommended)D not stable
S NBR FPM EPDM FEP PTFE
Salicylic acid B A A A A
Seawater containing chlorine and salt
D A D A A
Sodium bicarbonate (baking soda)
A A A A A
Sodium carbonate (soda) A A A A A
Sodium chloride (common salt)
A A A A A
Sodium hydroxide (caustic soda) 3 molar
B B A A A
Sodium nitrate (saltpetre) B A A A A
Sodium peroxide B A A A A
Sodiumsalts A A A A A
Soya oil A A C A A
Steam above +150 °C D D B A A
Steam below +150°C D C A A A
Sugar cane solution A A A A A
Sugar solutions A A A A A
Sugar-beet juice A A A A A
Sulphuric acid 3-molar D A B A A
Sulphuric acid concentrated D A D A A
Sulphurous acid B A B A A
14
General Terms and ConditionsLIAG® – LAEUFER International AG (Form 161)
1. Scope1.1 These General Terms and Conditions apply to all deliveries of goods or works. In case of process- and pigging system-deliveries and of installations, specific LIAG Conditions are supplemented (Form 162).1.2 Any alterations to the terms and conditions, mentioned under 1.1 are only binding if accepted in writing.
2. Offer2.1 Offers by the supplier are made without obligation.2.2 Specifications and quotes in catalogues, brochures etc., are only binding if expressly referred to in the order confirmation.2.3 The offer or project documentation must neither be reproduced nor disclosed to third parties without the supplier‘s consent. The documentation remains the supplier‘s property and must be returned to him upon request.
3. Acceptance3.1 The sales contract does not come into force until the buyer has received the written order confirmation from the supplier, or the goods have been effectively delivered to the buyer.3.2 Subsequent changes or amendments to the contract may be stipulated only in writing.
4. Prices4.1 Prices are quoted ex supplier‘s works or warehouse, excluding packaging, dispatch and VAT. All expenses, duties and taxes related to the delivery are to the buyer‘s account. 4.2 If an order should differ from the offer, the supplier reserves the right to change prices accordingly.4.3 Prices are based on the material and labour costs valid at the time of the first offer. Any changes to these costs prior to the date of delivery entitle the supplier to change prices accordingly.
5. Delivery and Dispatch5.1 Delivery periods do not run before the date of the order confirmation, and are deemed to be fulfilled when the goods are dispatched from the supplier‘s factory or warehouse.5.2 If not explicitly agreed otherwise, any governmental or other permits required for delivery in the buyer‘s country will delay, unless produced in time, delivery dates. They have to be obtained in the buyer‘s country by the buyer.5.3 Terms and obligations of delivery are suspended as long as the buyer‘s pay-ments are in arrear.5.4 The supplier is entitled to carry out and invoice partial or preliminary ship-ments.5.5 The agreed delivery periods are subject to force majeure, or unforeseen events or events beyond the control of the supplier, such as war, Acts of God, governmen-tal interventions and bans, energy and raw material shortages, strikes, transport damages or delays. These events entitle the supplier to extend the time of delivery, also if they affect any of his sub-suppliers.5.6 In case the delivery of the goods ready for dispatch is not possible or not desired by the buyer, the goods can be stored at the buyer‘s cost and risk. The delivery shall then be considered as performed.5.7 Compensation for delays in delivery shall be payable only upon separate agree-ment, and shall be limited to an eventual penalty stipulated by the parties, even if delays are caused by the supplier‘s negligence.
6. Performance of Contract and Transfer of Risk6.1 Costs and all risks are transferred to the buyer at the time of dispatch of the goods from the supplier‘s factory or warehouse, in default of the agreed delivery terms. This also applies in case of installations at the buyer‘s premises and transport by the supplier.6.2 If delivery is delayed by the buyer, transfer of costs and risk shall become effec-tive when the goods are ready for dispatch.6.3 All periods depending on the supplier‘s performance of contract run from the dates specified in this section, irrespective of any quality tests or trial runs.
7. Payment7.1 Unless otherwise agreed in writing, components shall be paid within 30 days from the invoice date after delivery. Systems, 40% of the contract price shall be paid after receipt of the order confirmation, 50% at the time of delivery and the remaining 10% within 30 days after delivery. Unless otherwise agreed, all invoices of the supplier shall become due within 30 days from the date of invoice.7.2 Partial invoices are due immediately upon receipt. This also applies to payments which have to be made for additional performances, beyond the initial terms of contract, regardless of the conditions of payment applicable to the main perfor-mance.7.3 Payment shall be made without any deduction in the agreed currency to the supplier‘s bank. Cheques or bills of exchange shall be accepted on account only, and all connected expenses shall be charged to the buyer‘s account.
7.4 The buyer shall not be entitled to withhold or reduce any payments due becau-se of warranty or compensation claims.7.5 In case of delayed payment the supplier is entitled eithera)to postpone his own obligations until receipt of the payments due,b) to fix a due date for all outstanding payments (cancellation of periods of payment),
c) to charge from maturity, interest at the current discount rate of Germany plus 5 per cent per year or d) to rescind from the contract if the buyer fails to pay within a reasonable period of grace.7.6 Until the buyer has fulfilled all financial obligations, the goods supplied shall remain the supplier’s property. The buyer shall be obliged to meet all legal require-ments in order to safeguard the supplier‘s property or security interest. In case of attachment or other kinds of seizure the buyer shall evidence the supplier‘s title and notify the latter immediately.
8. Warranty8.1 Unless otherwise agreed the warranty period shall be 24 months for com-ponents from the date of transfer of risk as stated in 6.1, regardless of the legal qualification of goods delivered or works performed.8.2 Claims will be accepted only if the supplier is immediately notified of the defect in writing. They are restricted to the repair or replacement of the defective goods. All other costs are to be borne by the buyer.8.3 Defects which are due to abuse, misapplication, failure to follow the instruc-tions for use, warnings, safety or other regulations provided by the supplier, impro-per or prolonged storage or other mistakes on the part of the buyer, are excluded from the warranty. In case of products which have been produced at the order of or according to the buyer‘s instructions or formulae, warranty will only cover the proper production of the goods.Normal wear will not be covered under warranty.8.4 Supplier‘s warranty obligations cease if any changes or repairs are caused by the buyer or a third person without supplier‘s prior written consent.The performance of a warranty obligation does not prolong the original warranty period.
9. Liability9.1 The supplier‘s liability according to the Product Liability Act is excluded, if specific provisions regarding the handling of the products, instructions for their use and/or warning and safety regulations as specified by the supplier have not been observed.9.2 Outside the scope of the Product Liability Act damages shall be compensated only if the supplier is held responsible for intent or gross negligence. In this case, however, claims are limited to personal injury and material damage resulting di-rectly from a defect in the products. All other claims, such as consequential loss of property or profit are explicitely excluded. Claims must be made in writing within a period of six months from the date of occurrence of the damage, but not later than two years from the date of delivery, otherwise they are forfeited.9.3 Buyer is liable to subject his customers to the limitations of liability contained in this paragraph.
10. Rescission of Contract10.1 The buyer can rescind the contract if delivery is delayed more than 60 days because of gross negligence of the supplier and despite a reasonable period of grace granted in writing.10.2 Apart from the case of delayed payment according to para 7.5 d) the supplier can rescind the contract ifa) delivery or performance becomes impossible for reasons attributable to the buyer, or is delayed beyond a reasonable period of grace established in writing;b) the buyer‘s financial situation has worsened notably after ordering the products, and he is not prepared to pay in advance, nor to provide sufficient security. Such rescission of contract shall also be permissible if only parts of the delivery or per-formance, which are still to be fulfilled, are affected.10.3 In case that, due to events indicated in para 5.5, the agreed delivery times are delayed by more than one half of the period, but at least six months, either party shall be entitled to rescind the contract with respect to those parts of the delivery or performance which have still to be fulfilled.10.4 If bankruptcy proceedings are instituted against either party‘s assets, or these proceedings are not instituted because of insufficient assets, the other party may rescind the contract with immediate effect.10.5 In case of rescission of contract for other reasons than the one stated in 10.1 all performances or parts thereof which have already been fulfilled by supplier, shall be settled and paid according to the contractual provisions, notwithstanding supplier’s claims for damages. This also applies to deliveries and performances not yet accepted by the buyer as well as to any preparatory work undertaken by the supplier.Alternatively, supplier is entitled to claim the restitution of products already delivered.Any other consequences resulting from a rescission of contract are excluded.
11. Patent Rights, Copyright11.1 In the event a product is produced according to the buyer‘s construction, drawings or specifications, the buyer has to keep the supplier harmless and indem-nified for any infringement of patent rights of third parties.11.2 All technical documents, in particular plans, drawings, technical descriptions, as well as catalogues, brochures, pictures or models etc. are the supplier‘s exclusive property and are subject to legal and statutory restrictions on copy, reproduction, competitive use etc.Para 2.3 also applies to such documents.
12. Place of Jurisdiction, Applicable Law12.1 In case of controversies arising from the contract the venue of legal procee-dings shall be the German tribunal at the supplier‘s registered place of business. The supplier shall, however, also be entitled to take action before a competent tribunal at the buyer’s place of business.12.2 The parties may also agree to have controversies settled by arbitration.12.3 The contract shall be construed and interpreted according to German law. It is mutually agreed that the UNCITRAL Agreement of the United Nations on the law of international sales of goods does not apply.
05/2008 Form 161
15
1
Amendment to the General Terms and Conditions Form 161 for Process- and Pigging Systems
LIAG® – LAEUFER International AG(Supplement Form 162)
1. Scope These Amendment Form 162 are special conditions that shall be applied to the delivery of process systems. Unless stipulated otherwise in these Conditions, the General Terms and Conditions of LIAG Form 161 shall apply.
2. Warranty, Maintenance, Modifications
2.1 For process- and pigging systems not excluded from warranty, LIAG guarantees correspondence with the contractual specifications, provided that the system is installed properly and used under the conditions specified in the contract.
2.2 The warranty includes error diagnosis and error correction during the duration of the warranty period. Unless stipulated otherwise, the warranty period for system is three months from the date of acceptance. The correction of errors, i.e. deviations from the valid specifications which impair the functioning of the system, is effected by LIAG through support and instructions for troubleshooting,. If this is not possible, error correction implies delivery of additional system components or, redesigned system equipment. If this is not possible, troubleshooting (modification of system) at the buyer‘s place. The preconditions for the correction of a system error are that the error impairs the functioning of the process; that the error is reproducable; that the buyer has installed the system, if any, offered to him free of charge during the warranty period; that the buyer provides all information and material necessary for error correction; and that LIAG has access to the hardware and software belonging to the system during normal working hours. The buyer agrees to support LIAG in error correction by providing a qualified expert whose qualifications meet the requirements of the system and who helps to remove the error.
2.3 LIAG does not warrant systems which has been modified by the buyer or by third parties without LIAG’s consent and knowledge, even if the error occurs in a part not modified. If during error analysis the conclusion is made that the error is not subject to warranty or that the error was not caused by the delivered system, the buyer is charged with all resulting costs.
2.4 LIAG does not guarantee that the system functionality meets all requirements of the buyer, that the system run with other processing components used by the buyer; that the system runs without interruptions or errors; or that all system errors can be corrected.
2.5 Should, during warranty period, the system be deficient in the way that it does not meet the specifications and should LIAG, in spite of sustained efforts, not be able to remove the error and should the buyer for this reason not be able to use the system, each party has the right to rescind the Contract with immediate effect and refund the received performances.
2.6 The presence of deficiencies in individual system parts does not entitle the buyer to rescind the contract also with respect to the complete process- and/or pigging system.
2.7 The warranty excludes any other claim and the liability for any damage arising out of the use of the system.
05/2008 Form 162
17
LIAG® Bogenventile sind für hohe An-forderungen in der Verfahrenstechnik entwickelt worden. Aufgrund des völlig freien Durchgangs und der einfachen, gründlichen Reinigbarkeit in CIP (Clean In Place) sind Bogenventile besonders für zähe/pastöse Medien geeignet.
Für viele Anwendungsfälle in der Molchtechnik bietet das Ventil optimale Bedingungen. Durch die konstruktive Einfachheit und minimale Anzahl von Bau- und Verschleißteilen sind Bogenven-tile äußerst hygienisch, wartungsarm und betriebssicher.
Merkmale• Keine Toträume• CIP/SIP-fähige Konstruktion• Völlig freier Durchgang – kein Druckverlust • Keine Produkteinschlüsse und
Einklemmen von Feststoffen• Molchbar mit LIAG® DMV Lippenmolchen • Minimum an Bau- und Verschleißteilen• Eingeschweißt komplett zerlegbar• Optional mit 3-A Zulassung nach FDA
Features• No dead pockets• CIP/SIP capability• Totally clear passage – no pressure loss• No product remainders or
sticking of solid particles• Designed to be passed with
LIAG® lip pigs • Minimum number of components
and wearing parts • Can be completely dismantled
even when welded in place• Optionally with 3-A approval / FDA
LIAG® arc valves have been designed to meet the high demands of process engi-neering applications. Arc valves are partic-ularly suited for viscous/pasty products and fluids containing solid particles on account of a totally clear passage, as well as easy and thorough cleaning in place.
This valve series thus provides optimum conditions for a wide variety of pigging system applications. By virtue of their simplicity of design and minimum num-ber of components and wearing parts, arc valves are characterized by high hygiene, low maintenance and safe operation.
18
VentildeckelValve cap
Schließsegment mit optimaler Abdichtung durch SelbstzentrierungSelf centering shutter segment with optimum sealing
Federbogen mit Vorspannungmittels Linienberührung wird das Schließ-segment gegen das Gehäuse gepresstPrestressed arc (line contact)the arc presses the shutter against the valve body
Anzugsmutter / KonusGegenlager bei Druckschlägen sowie zur Erhöhung des AnpressdrucksPinching nut / coneto increase the sealing pressure
VentilgehäuseValve body
Kein Totraumvollständiges Ausspülen im CIPNo dead pocketsfull cleaning in CIP
Nur ein beweglicher O-RingOnly one moving O-ring
MolchrichtungPig direction
ProduktraumProduct area
2-Wege Bogenventil 2-way arc valve
3-Wege Bogenventil 3-way arc valve
19
NennweitenDIN DN25 – DN 150 / SMS DN25 – DN102 / Zoll 1"– 6"
WerkstoffeProduktberührende Edelstahlteile: AISI 316L (1.4404 / 1.4435)Andere Edelstahlteile: AISI 304 (1.4301) O-Ring Dichtungen: EPDM, FPM (Viton®), FEPandere Qualitäten auf AnfrageSchließer: Hostaflon® (PTFE TFM1600)
OberflächenProduktberührend: Ra 0,8 µm (Ra 32 µin)
TemperaturBetriebstemperatur: 110°C (230°F) Kurzzeitig: 140°C (284°F)
– Optional bis 160°C (320°F)
BetriebsdruckDruck hinter Federbogen: 10 bar (145 psi) – Optional bis 15 bar (217,5 psi)Druck gegen Federbogen: 3 bar (43,5 psi) – Optional bis 5 bar (72,5 psi)
Ausführungen• 2- / 3- / 4-Wege (a. A.)
VentilanschlussartenSchweißende: DIN, SMS, ZollGewinde: DIN 11851, SMS 1145 Clamp: Tri-Clamp
Weitere Optionen• Schließerwerkstoff; alternativ Teflon (GL25) glasfaserverstärkt, Fluorosint® 207, Tecapeek®, Techtron®• Beheizbare Ausführung • Leckageüberwachung der beweglichen O-Ring Dichtung / Dampfsperre • Kugellagergeführte Schaltwelle • Kombination verschiedener Anschlussarten • Unterschiedliche Antriebsfabrikate nach Namur DIN ISO 5211 liefer- und adaptierbar (pneumatisch, elektrisch, 90° / 180°)• 3-A Zulassung nach FDA
QualitätsüberwachungNeben fertigungstechnischen Qualitätssicherungs-maßnahmen (DIN EN ISO 9001) wird jedes Ventil vor Auslieferung auf Funktion und Dichtheit nach DIN 3230/BN geprüft.
Nominal sizesDIN DN25 – DN 150 / SMS DN25 – DN102 / Inch 1" – 6"
MaterialsInox parts in contact with product:AISI 316L (1.4404 / 1.4435)Other inox parts: AISI 304 (1.4301) O-ring seals: EPDM, FPM (Viton®), FEPother grades upon requestShutter: Hostaflon® (PTFE TFM1600)
SurfacesIn contact with product: Ra 0,8 µm (Ra 32 µin)
TemperatureOperating temperature: 110°C (230°F) Short-term: 140°C (284°F) – optionally up to160°C (320°F)
Operating pressurePressure behind arc: 10 bar (145 psi) – optionally up to 15 bar (217,5 psi)Pressure against arc: 3 bar (43,5 psi) – optionally up to 5 bar (72,5 psi)
Versions• 2- / 3- / 4-way (upon request)
Valve connectionWelded ends: DIN, SMS, InchMale ends: DIN 11851, SMS 1145 Clamp connection: Tri-Clamp
Further options• Shutter material; alternatively glass-fiber reinforced Teflon (GL25), Fluorosint® 207, Tecapeek®, Techtron®• Heated version • Leakage control of moving O-ring seal/steam barrier • Ball-bearing supported selector shaft • Combination of different types of connection • Delivery and adaptation to actuators of different manufacture per Namur DIN ISO 5211 (pneumatic, electric, 90° / 180°)• 3-A approval / FDA
Quality controlIn addition to the assurance measures during production (DIN EN ISO 9001), every single valve is inspected for proper function and tightness in accordance with DIN 3230/BN before shipment.
20
2-Wege Bogenventil Serie 21, manuell, Schweißende DIN 118502-way arc valve series 21, manual, welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D52M21 26 29 145 50 128 160
40 40D52M21 38 41 180 65 160 160
50 50D52M21 50 53 190 70 164 190
65 65D52M21 66 70 215 80 220 190
80 80D52M21 81 85 230 90 230 190
100 100D52M21 100 104 265 110 260 270
150 150D52M21 150 154 345 140 500 270
2-Wege Bogenventil Serie 21, manuell, Gewinde DIN 118512-way arc valve series 21, manual, male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D520M21 26 52 145 50 136 160
40 40D520M21 38 65 180 65 164 160
50 50D520M21 50 78 190 70 187 190
65 65D520M21 66 95 215 80 233 190
80 80D520M21 81 110 230 90 263 190
100 100D520M21 100 130 265 110 311 270
www.laeufer-ag.de 21
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende DIN 118502-way arc valve series 21, pneumatic (air/air - air/spring), welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25D52A21 26 29 300 50 128 89
40 40D52A21 38 41 335 65 160 89
50 50D52A21 50 53 340 70 164 104
65 65D52A21 66 70 422 80 220 129
80 80D52A21 81 85 440 90 230 129
100 100D52A21 100 104 470 110 260 129
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde DIN 118512-way arc valve series 21, pneumatic (air/air - air/spring), male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25D520A21 26 52 300 50 136 89
40 40D520A21 38 65 335 65 164 89
50 50D520A21 50 78 340 70 187 104
65 65D520A21 66 95 422 80 233 129
80 80D520A21 81 110 440 90 263 129
100 100D520A21 100 130 470 110 311 129
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende DIN 118502-way arc valve series 21, pneumatic (air/air - air/spring), welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D52Ab21 26 29 256 50 128 215
40 40D52Ab21 38 41 292 65 160 215
50 50D52Ab21 50 53 298 70 164 215
65 65D52Ab21 66 70 324 80 220 215
80 80D52Ab21 81 85 363 90 230 222
100 100D52Ab21 100 104 395 110 260 222
150 150D52Ab21 150 154 540 140 500 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde DIN 118512-way arc valve series 21, pneumatic (air/air - air/spring), male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D520Ab21 26 52 256 50 136 215
40 40D520Ab21 38 65 292 65 164 215
50 50D520Ab21 50 78 298 70 187 215
65 65D520Ab21 66 95 324 80 233 215
80 80D520Ab21 81 110 363 90 263 222
100 100D520Ab21 100 130 395 110 311 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
22
3-Wege Bogenventil Serie 21, manuell, Schweißende DIN 118503-way arc valve series 21, manual, welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D53M21 26 29 145 50 128 160
40 40D53M21 38 41 180 65 160 160
50 50D53M21 50 53 190 70 164 190
65 65D53M21 66 70 215 80 220 190
80 80D53M21 81 85 230 90 230 190
100 100D53M21 100 104 265 110 260 270
150 150D53M21 150 154 345 140 500 270
3-Wege Bogenventil Serie 21, manuell, Gewinde DIN 118513-way arc valve series 21, manual, male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D530M21 26 52 145 50 136 160
40 40D530M21 38 65 180 65 164 160
50 50D530M21 50 78 190 70 187 190
65 65D530M21 66 95 215 80 233 190
80 80D530M21 81 110 230 90 263 190
100 100D530M21 100 130 265 110 311 270
www.laeufer-ag.de 23
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende DIN 118503-way arc valve series 21, pneumatic (air/air - air/spring), welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25D53A21 26 29 300 50 128 89
40 40D53A21 38 41 335 65 160 89
50 50D53A21 50 53 340 70 164 104
65 65D53A21 66 70 422 80 220 129
80 80D53A21 81 85 440 90 230 129
100 100D53A21 100 104 470 110 260 129
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde DIN 118513-way arc valve series 21, pneumatic (air/air - air/spring), male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25D530A21 26 52 300 50 136 89
40 40D530A21 38 65 335 65 164 89
50 50D530A21 50 78 340 70 187 104
65 65D530A21 66 95 422 80 233 129
80 80D530A21 81 110 440 90 263 129
100 100D530A21 100 130 470 110 311 129
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende DIN 118503-way arc valve series 21, pneumatic (air/air - air/spring), welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D53Ab21 26 29 256 50 128 215
40 40D53Ab21 38 41 292 65 160 215
50 50D53Ab21 50 53 298 70 164 215
65 65D53Ab21 66 70 324 80 220 215
80 80D53Ab21 81 85 363 90 230 222
100 100D53Ab21 100 104 395 110 260 222
150 150D53Ab21 150 154 540 140 500 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde DIN 118513-way arc valve series 21, pneumatic (air/air - air/spring), male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D530Ab21 26 52 256 50 136 215
40 40D530Ab21 38 65 292 65 164 215
50 50D530Ab21 50 78 298 70 187 215
65 65D530Ab21 66 95 324 80 233 215
80 80D530Ab21 81 110 363 90 263 222
100 100D530Ab21 100 130 395 110 311 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
24
2-Wege Bogenventil Serie 21, manuell, Schweißende SMS2-way arc valve series 21, manual, welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S52M21 22,5 25 145 50 110 160
38 38S52M21 35,5 38 180 65 140 160
51 51S52M21 48,5 51 190 70 164 190
63 63S52M21 60,5 63,5 200 75 210 190
76 76S52M21 72 76 215 80 220 190
102 102S52M21 98 102 265 110 310 270
2-Wege Bogenventil Serie 21, manuell, Gewinde SMS 11452-way arc valve series 21, manual, male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S520M21 22,5 40 145 50 110 160
38 38S520M21 35,5 60 180 65 140 160
51 51S520M21 48,5 70 190 70 164 190
63 63S520M21 60,5 85 200 75 210 190
76 76S520M21 72 98 215 80 220 190
102 102S520M21 98 132 265 110 310 270
www.laeufer-ag.de 25
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende SMS 2-way arc valve series 21, pneumatic (air/air - air/spring), welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25S52A21 22,5 25 300 50 110 89
38 38S52A21 35,5 38 335 65 140 89
51 51S52A21 48,5 51 340 70 164 104
63 63S52A21 60,5 63,5 355 75 210 104
76 76S52A21 72 76 420 80 220 129
102 102S52A21 98 102 470 110 310 129
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde SMS 11452-way arc valve series 21, pneumatic (air/air - air/spring), male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25S520A21 22,5 40 300 50 110 89
38 38S520A21 35,5 60 335 65 140 89
51 51S520A21 48,5 70 340 70 164 104
63 63S520A21 60,5 85,5 355 75 210 104
76 76S520A21 72 98 420 80 220 129
102 102S520A21 98 132 470 110 310 129
SMS102 nur in Luft/Luft SMS102only in air/air
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende SMS2-way arc valve series 21, pneumatic (air/air - air/spring), welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S52Ab21 22,5 25 256 50 110 215
38 38S52Ab21 35,5 38 292 65 140 215
51 51S52Ab21 48,5 51 298 70 164 215
63 63S52Ab21 60,5 63,5 312 75 210 215
76 76S52Ab21 72 76 347 80 220 222
102 102S52Ab21 98 102 395 110 310 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde SMS 11452-way arc valve series 21, pneumatic (air/air - air/spring), male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S520Ab21 22,5 40 256 50 110 215
38 38S520Ab21 35,5 60 292 65 140 215
51 51S520Ab21 48,5 70 298 70 164 215
63 63S520Ab21 60,5 85 312 75 210 215
76 76S520Ab21 72 98 347 80 220 222
102 102S520Ab21 98 132 395 110 310 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
26
3-Wege Bogenventil Serie 21, manuell, Schweißende SMS 3-way arc valve series 21, manual, welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S53M21 22,5 25 145 50 110 160
38 38S53M21 35,5 38 180 65 140 160
51 51S53M21 48,5 51 190 70 164 190
63 63S53M21 60,5 63,5 200 75 210 190
76 76S53M21 72 76 215 80 220 190
102 102S53M21 98 102 265 110 310 270
3-Wege Bogenventil Serie 21, manuell, Gewinde SMS 11453-way arc valve series 21, manual, male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S530M21 22,5 40 145 50 110 160
38 38S530M21 35,5 60 180 65 140 160
51 51S530M21 48,5 70 190 70 164 190
63 63S530M21 60,5 85 200 75 210 190
76 76S530M21 72 98 215 80 220 190
102 102S530M21 98 132 265 110 310 270
www.laeufer-ag.de 27
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende SMS 3-way arc valve series 21, pneumatic (air/air - air/spring), welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25S53A21 22,5 25 300 50 110 89
38 38S53A21 35,5 38 335 65 140 89
51 51S53A21 48,5 51 340 70 164 104
63 63S53A21 60,5 63,5 355 75 210 104
76 76S53A21 72 76 420 80 220 129
102 102S53A21 98 102 470 110 310 129
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde SMS 11453-way arc valve series 21, pneumatic (air/air - air/spring), male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L Ø D1
25 25S530A21 22,5 40 300 50 110 89
38 38S530A21 35,5 60 335 65 140 89
51 51S530A21 48,5 70 340 70 164 104
63 63S530A21 60,5 85,5 355 75 210 104
76 76S530A21 72 98 420 80 220 129
102 102S530A21 98 132 470 110 310 129
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende SMS 3-way arc valve series 21, pneumatic (air/air - air/spring), welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S53Ab21 22,5 25 256 50 110 215
38 38S53Ab21 35,5 38 292 65 140 215
51 51S53Ab21 48,5 51 298 70 164 215
63 63S53Ab21 60,5 63,5 312 75 210 215
76 76S53Ab21 72 76 347 80 220 222
102 102S53Ab21 98 102 395 110 310 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Gewinde SMS 11453-way arc valve series 21, pneumatic (air/air - air/spring), male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S530Ab21 22,5 40 256 50 110 215
38 38S530Ab21 35,5 60 292 65 140 215
51 51S530Ab21 48,5 70 298 70 164 215
63 63S530Ab21 60,5 85 312 75 210 215
76 76S530Ab21 72 98 347 80 220 222
102 102S530Ab21 98 132 395 110 310 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
28
2-Wege Bogenventil Serie 21, manuell, Schweißende 2-way arc valve series 21, manual, welded ends
DN Typ Type Ø d1 Ø d2 H h L L1
1" 25C52M21 22,2 25,4 145 50 110 160
1½" 38C52M21 34,9 38,1 180 65 140 160
2" 51C52M21 47,5 50,8 190 70 164 190
2½" 63C52M21 60,2 63,5 200 75 210 190
3" 76C52M21 72,9 76,2 215 80 220 190
4" 102C52M21 97,4 101,6 265 110 310 270
6" 152C52M21 146,8 152,4 345 140 500 270
2-Wege Bogenventil Serie 21, manuell, TC-Clamp2-way arc valve series 21, manual, TC-clamp
DN Typ Type Ø d1 Ø D H h L L1
1" 25C520M21 22,2 50,5 145 50 135,4 160
1½" 38C520M21 34,9 50,5 180 65 165,4 160
2" 51C520M21 47,5 64 190 70 189,4 190
2½" 63C520M21 60,2 77,5 200 75 235,4 190
3" 76C520M21 72,9 91 215 80 245,4 190
4" 102C520M21 97,4 119 265 110 335,4 270
www.laeufer-ag.de 29
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende 2-way arc valve series 21, pneumatic (air/air - air/spring), welded ends
DN Typ Type Ø d1 Ø d2 H h L Ø D1
1" 25C52A21 22,2 25,4 300 50 110 89
1½" 38C52A21 34,9 38,1 335 65 140 89
2" 51C52A21 47,5 50,8 340 70 164 104
2½" 63C52A21 60,2 63,5 355 75 210 104
3" 76C52A21 72,9 76,2 420 80 220 129
4" 102C52A21 97,4 101,6 470 110 310 129
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), TC-Clamp 2-way arc valve series 21, pneumatic (air/air - air/spring), TC-clamp
DN Typ Type Ø d1 Ø D H h L Ø D1
1" 25C520A21 22,2 50,5 300 50 135,4 89
1½" 38C520A21 34,9 50,5 335 65 165,4 89
2" 51C520A21 47,5 64 340 70 189,4 104
2½" 63C520A21 60,2 77,5 355 75 235,4 104
3" 76C520A21 72,9 91 420 80 245,4 129
4" 102C520A21 97,4 119 470 110 335,4 129
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende2-way arc valve series 21, pneumatic (air/air - air/spring), welded ends
DN Typ Type Ø d1 Ø d2 H h L L1
1" 25C52Ab21 22,2 25,4 256 50 110 215
1½" 38C52Ab21 34,9 38,1 292 65 140 215
2" 51C52Ab21 47,5 50,8 298 70 164 215
2½" 63C52Ab21 60,2 63,5 312 75 210 215
3" 76C52Ab21 72,9 76,2 347 80 220 222
4" 102C52Ab21 97,4 101,6 395 110 310 222
6" 152C52Ab21 146,8 152,4 540 140 500 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
2-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), TC-Clamp 2-way arc valve series 21, pneumatic (air/air - air/spring), TC-clamp
DN Typ Type Ø d1 Ø D H h L L1
1" 25C520Ab21 22,2 50,5 256 50 135,4 215
1½" 38C520Ab21 34,9 50,5 292 65 165,4 215
2" 51C520Ab21 47,5 64 298 70 189,4 215
2½" 63C520Ab21 60,2 77,5 312 75 235,4 215
3" 76C520Ab21 72,9 91 347 80 245,4 222
4" 102C520Ab21 97,4 119 395 110 335,4 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
30
3-Wege Bogenventil Serie 21, manuell, Schweißende 3-way arc valve series 21, manual, welded ends
DN Typ Type Ø d1 Ø d2 H h L L1
1" 25C53M21 22,2 25,4 145 50 110 160
1½" 38C53M21 34,9 38,1 180 65 140 160
2" 51C53M21 47,5 50,8 190 70 164 190
2½" 63C53M21 60,2 63,5 200 75 210 190
3" 76C53M21 72,9 76,2 215 80 220 190
4" 102C53M21 97,4 101,6 265 110 310 270
6" 152C53M21 146,8 152,4 345 140 500 270
3-Wege Bogenventil Serie 21, manuell, TC-Clamp 3-way arc valve series 21, manual, TC-clamp
DN Typ Type Ø d1 Ø D H h L L1
1" 25C530M21 22,2 50,5 145 50 135,4 160
1½" 38C530M21 34,9 50,5 180 65 165,4 160
2" 51C530M21 47,5 64 190 70 189,4 190
2½" 63C530M21 60,2 77,5 200 75 235,4 190
3" 76C530M21 72,9 91 215 80 245,4 190
4" 102C530M21 97,4 119 265 110 335,4 270
www.laeufer-ag.de 31
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende3-way arc valve series 21, pneumatic (air/air - air/spring), welded ends
DN Typ Type Ø d1 Ø d2 H h L Ø D1
1" 25C53A21 22,2 25,4 300 50 110 89
1½" 38C53A21 34,9 38,1 335 65 140 89
2" 51C53A21 47,5 50,8 340 70 164 104
2½" 63C53A21 60,2 63,5 355 75 210 104
3" 76C53A21 72,9 76,2 420 80 220 129
4" 102C53A21 97,4 101,6 470 110 310 129
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), TC-Clamp 3-way arc valve series 21, pneumatic (air/air - air/spring), TC-clamp
DN Typ Type Ø d1 Ø D H h L Ø D1
1" 25C530A21 22,2 50,5 300 50 135,4 89
1½" 38C530A21 34,9 50,5 335 65 165,4 89
2" 51C530A21 47,5 64 340 70 189,4 104
2½" 63C530A21 60,2 77,5 355 75 235,4 104
3" 76C530A21 72,9 91 420 80 245,4 129
4" 102C530A21 97,4 119 470 110 335,4 129
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), Schweißende 3-way arc valve series 21, pneumatic (air/air - air/spring), welded ends
DN Typ Type Ø d1 Ø d2 H h L L1
1" 25C53Ab21 22,2 25,4 256 50 110 215
1½" 38C53Ab21 34,9 38,1 292 65 140 215
2" 51C53Ab21 47,5 50,8 298 70 164 215
2½" 63C53Ab21 60,2 63,5 312 75 210 215
3" 76C53Ab21 72,9 76,2 347 80 220 222
4" 102C53Ab21 97,4 101,6 395 110 310 222
6" 152C53Ab21 146,8 152,4 540 140 500 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
3-Wege Bogenventil Serie 21, pneumatisch (L/L - L/F), TC-Clamp 3-way arc valve series 21, pneumatic (air/air - air/spring), TC-clamp
DN Typ Type Ø d1 Ø D H h L L1
1" 25C530Ab21 22,2 50,5 256 50 135,4 215
1½" 38C530Ab21 34,9 50,5 292 65 165,4 215
2" 51C530Ab21 47,5 64 298 70 189,4 215
2½" 63C530Ab21 60,2 77,5 312 75 235,4 215
3" 76C530Ab21 72,9 91 347 80 245,4 222
4" 102C530Ab21 97,4 119 395 110 335,4 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf AnfragePneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
33
LIAG® Molchweichen gewährleisten ein hohes Maß an Hygiene und basieren auf dem gleichen Konstruktionsprinzip wie Bogenventile. Produkteinschlüsse beim Schalten werden dadurch vermieden. Haupteinsatzgebiet von LIAG® Molchwei-chen sind sterile Molchsysteme, da neben guter CIP-Reinigbarkeit diese Ventile auch eingeschweißt einfach und schnell zerlegbar sind.
Mit LIAG® Molchweichen kann auf Gewindeverschraubungen verzichtet werden. Damit sind zusätzliche Gefahren-herde bereits im Vorfeld eliminiert. Weitere Merkmale dieser Baureihe sind die im Vergleich geringen Einbaumaße und die problemlosen Umrüstungsmöglichkeiten.
Merkmale• Keine Toträume• CIP/SIP-fähige Konstruktion• Völlig freier Durchgang – kein Druckverlust • Keine Produkteinschlüsse und
Einklemmen von Feststoffen• Molchbar mit LIAG® DMV Lippenmolchen• Kompaktbauweise für 90°-Einbau • Minimum an Bau- und Verschleißteilen• Eingeschweißt komplett zerlegbar• Optional mit 3-A Zulassung nach FDA
Features• No dead pockets• CIP/SIP capability• Totally clear passage – no pressure loss• No product remainders or sticking
of solid particles• Designed to be passed with LIAG®
lip pigs • Compact design for 90° installation• Minimum number of components
and wearing parts • Can be completely dismantled
even when welded in place• Optionally with 3-A approval / FDA
LIAG® pigging valves ensure a high degree of hygiene. They build upon the same design principle as arc valves. By virtue of this principle no products remain in the valves during operation. The prime use of LIAG® pigging valves is with sterile pigging systems as they can be disassembled easily and quickly even when welded in place, and addi-tionally, offer high CIP capability.
With LIAG® pigging valves, threaded connections, which can present potential hazards, are virtually no longer needed. Further features of these models are their comparatively small assembly dimen-sions and their ease of conversion.
34
MolchrichtungPig direction
ProduktraumProduct area
Molchweiche 90°/120° Pigging valve 90°/120°
VentildeckelValve cap
Schließsegment mit optimaler Abdichtung durch SelbstzentrierungSelf centering shutter segment with optimum sealing
Federbogen mit Vorspannungmittels Linienberührung wird das Schließ-segment gegen das Gehäuse gepresstPrestressed arc (line contact)the arc presses the shutter against the valve body
Anzugsmutter / KonusGegenlager bei Druckschlägen sowie zur Erhöhung des AnpressdrucksPinching nut / coneto increase the sealing pressure
VentilgehäuseValve body
Kein Totraumvollständiges Ausspülen im CIPNo dead pocketsfull cleaning in CIP
Nur ein beweglicher O-RingOnly one moving O-ring
35
NennweitenDIN DN40 – DN100 / SMS DN38 – DN102 / Zoll 1,5" – 4"
WerkstoffeProduktberührende Edelstahlteile: AISI 316L (1.4404 / 1.4435)Andere Edelstahlteile: AISI 304 (1.4301) O-Ring Dichtungen: EPDM, FPM (Viton®), FEPandere Qualitäten auf AnfrageSchließer: Hostaflon® (PTFE TFM1600)
OberflächenProduktberührend: Ra 0,8 µm (Ra 32 µin)
TemperaturBetriebstemperatur: 110°C (230°F) Kurzzeitig: 140°C (284°F) – Optional bis 160°C (320°F)
BetriebsdruckDruck hinter Federbogen: 10 bar (145 psi) – Optional bis 15 bar (217,5 psi)Druck gegen Federbogen: 3 bar (43,5 psi) – Optional bis 5 bar (72,5 psi)
Ausführungen3-Wege (3 x 120°)
VentilanschlussartenSchweißende: DIN, SMS, Zoll Gewinde: DIN 11851, SMS 1145 Clamp: Tri-Clamp
Weitere Optionen• Schließerwerkstoff; alternativ Teflon (GL25)
glasfaserverstärkt, Fluorosint® 207, Tecapeek® , Techtron®• Beheizbare Ausführung • Kombination verschiedener Anschlussarten • Unterschiedliche Antriebsfabrikate nach
Namur DIN ISO 5211 liefer- und adaptierbar (pneumatisch, elektrisch, 120° / 240°)
• 3-A Zulassung nach FDA
QualitätsüberwachungNeben fertigungstechnischen Qualitätssicherungs-maßnahmen (DIN EN ISO 9001) wird jedes Ventil vor Auslieferung auf Funktion und Dichtheit nach DIN 3230/BN geprüft.
Nominal sizesDIN DN40 – DN100 / SMS DN38 – DN102 / Inch 1,5" – 4"
MaterialsInox parts in contact with product: AISI 316L (1.4404 / 1.4435)Other inox parts: AISI 304 (1.4301) O-ring seals: EPDM, FPM (Viton®), FEPother grades upon requestShutter: Hostaflon® (PTFE TFM1600)
SurfacesIn contact with product: Ra 0,8 µm (Ra 32 µin)
TemperatureOperating temperature: 110°C (230°F) Short-term: 140°C (284°F) – optionally up to160°C (320°F)
Operating pressurePressure behind arc: 10 bar (145 psi) – optionally up to 15 bar (217,5 psi)Pressure against arc: 3 bar (43,5 psi) – optionally up to 5 bar (72,5 psi)
Versions3-way (3 x 120°)
Valve connectionWelded ends: DIN, SMS, InchMale ends: DIN 11851, SMS 1145 Clamp connection: Tri-Clamp
Further options• Shutter material; alternatively glass-fiber reinforced
teflon (GL25), Fluorosint® 207, Tecapeek®, Techtron®• Heated version • Combination of different types of connection • Delivery and adaptation to actuators of
different manufacture per Namur DIN ISO 5211 (pneumatic, electric, 120° / 240°)
• 3-A approval / FDA
Quality controlIn addition to the assurance measures during production (DIN EN ISO 9001), every single valve is inspected for proper function and tightness in accordance with DIN 3230/BN before shipment.
36
90°/120° Molchweiche, manuell, Schweißende DIN 1185090°/120° pigging valve, manual, welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
40 40DV53M21 38 41 180 65 135 160 67,5 100
50 50DV53M21 50 53 190 70 168 190 84 123
65 65DV53M21 66 70 215 80 204 190 102 151
80 80DV53M21 81 85 230 90 216 190 108 167
100 100DV53M21 100 104 265 110 260 270 130 194
90°/120° Molchweiche, manuell, Gewinde DIN 1185190°/120° pigging valve, manual, male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
40 40DV530M21 38 65 180 65 178 160 89 120
50 50DV530M21 50 78 190 70 211 190 105,5 145
65 65DV530M21 66 95 215 80 263 190 131,5 180,5
80 80DV530M21 81 110 230 90 290 190 145 201
100 100DV530M21 100 130 265 110 318 270 159 222
90°/120° Molchweiche, pneumatisch (L/L), Schweißende DIN 1185090°/120° pigging valve, pneumatic (air/air), welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
40 40DV53Ab21 38 41 275 65 135 182 67,5 100
50 50DV53Ab21 50 53 281 70 168 182 84 123
65 65DV53Ab21 66 70 324 80 204 244 102 151
80 80DV53Ab21 81 85 340 90 216 244 108 167
100 100DV53Ab21 100 104 372 110 260 244 130 194
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf Anfrage Pneumatic actuator with aluminium housing – series B, PTFE coated housing upon request
90°/120° Molchweiche, pneumatisch (L/L), Gewinde DIN 1185190°/120° pigging valve, pneumatic (air/air), male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
40 40DV530Ab21 38 65 275 60 178 182 89 120
50 50DV530Ab21 50 78 281 70 211 182 105,5 145
65 65DV530Ab21 66 95 324 90 263 244 131,5 180,5
80 80DV530Ab21 81 110 340 100 290 244 145 201
100 100DV530Ab21 100 130 372 110 318 244 159 222
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf Anfrage Pneumatic actuator with aluminium housing - series B, PTFE coated housing upon request
www.laeufer-ag.de 37
90°/120° Molchweiche, manuell, Schweißende SMS90°/120° pigging valve, manual, welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
38 38SV53M21 35,5 38 180 65 131 160 65,5 96,5
51 51SV53M21 48,5 51 190 70 166 190 83 120,5
63 63SV53M21 60,5 63,5 200 75 198 190 99 143,5
76 76SV53M21 72 76 215 80 218 190 109 158
102 102SV53M21 98 102 265 110 310 270 155 224
90°/120° Molchweiche, manuell, Gewinde SMS 114590°/120° pigging valve, manual, male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
38 38SV530M21 35,5 60 180 65 171 160 85,5 116,5
51 51SV530M21 48,5 70 190 70 206 190 103 140,5
63 63SV530M21 60,5 85 200 75 246 190 123 167,5
76 76SV530M21 72 98 215 80 273 190 136,5 187
102 102SV530M21 98 132 265 110 374 270 190 256
90°/120° Molchweiche, pneumatisch (L/L), Schweißende SMS90°/120° pigging valve, pneumatic (air/air), welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
38 38SV53Ab21 35,5 38 275 60 131 182 65,5 96,5
51 51SV53Ab21 48,5 51 281 70 166 182 83 120,5
63 63SV53Ab21 60,5 63,5 312 80 198 244 99 143,5
76 76SV53Ab21 72 76 324 90 218 244 109 158
102 102SV53Ab21 98 102 372 110 310 244 155 224
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf Anfrage Pneumatic actuator with aluminium housing - series B, PTFE coated housing upon request
90°/120° Molchweiche, pneumatisch (L/L), Gewinde SMS 114590°/120° pigging valve, pneumatic (air/air), male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
38 38SV530Ab21 35,5 60 275 60 171 182 85,5 116,5
51 51SV530Ab21 48,5 70 281 70 206 182 103 140,5
63 63SV530Ab21 60,5 85 312 80 246 244 123 167,5
76 76SV530Ab21 72 98 324 90 273 244 136,5 187
102 76SV530Ab21 98 132 372 110 374 244 190 256
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf Anfrage Pneumatic actuator with aluminium housing - series B, PTFE coated housing upon request
3838
90°/120° Molchweiche, manuell, Schweißende 90°/120° pigging valve, manual, welded ends
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
1½" 38CV53M21 34,9 38,1 160 60 131 160 65,5 96,5
2" 51CV53M21 47,5 50,8 170 70 166 190 83 120,5
2½" 63CV53M21 60,2 63,5 190 80 198 190 99 143,5
3" 76CV53M21 72,9 76,2 200 90 218 190 109 158
4" 102CV53M21 97,4 101,6 250 110 310 270 155 244
90°/120° Molchweiche, manuell, TC-Clamp90°/120° pigging valve, manual, TC-clamp
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
1½" 38CV530M21 34,9 50,5 160 60 156,4 160 78,2 109
2" 51CV530M21 47,5 64 170 70 191,4 190 95,7 133
2½" 63CV530M21 60,2 77,5 190 80 223,4 190 111,7 156
3" 76CV530M21 72,9 91 200 90 243,4 190 121,7 170,5
4" 102CV530M21 97,4 119 250 110 335,4 270 167,7 236,5
90°/120° Molchweiche, pneumatisch (L/L), Schweißende90°/120° pigging valve, pneumatic (air/air), welded ends
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
1½" 38CV53Ab21 34,9 38,1 275 60 131 182 65,5 96,5
2" 51CV53Ab21 47,5 50,8 281 70 166 182 83 120,5
2½" 63CV53Ab21 60,2 63,5 312 80 198 244 99 143,5
3" 76CV53Ab21 72,9 76,2 324 90 218 244 109 158
4" 102CV53Ab21 97,4 101,6 372 110 310 244 155 224
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf Anfrage Pneumatic actuator with aluminium housing - series B, PTFE coated housing upon request
90°/120° Molchweiche, pneumatisch (L/L), TC-Clamp90°/120° pigging valve, pneumatic (air/air), TC-clamp
DN Typ Type Ø d1 Ø d2 H h L L1 L2 L3
1½" 38CV530Ab21 34,9 50,5 275 60 156,4 182 78,2 109
2" 51CV530Ab21 47,5 64 281 70 191,4 182 95,7 133
2½" 63CV530Ab21 60,2 77,5 312 80 223,4 244 111,7 156
3" 76CV530Ab21 72,9 91 324 90 243,4 244 121,7 170,5
4" 102CV530Ab21 97,4 119 372 110 335,4 244 167,7 236,5
Pneumatikantrieb mit Aluminiumgehäuse – Serie B, Gehäuse mit PTFE Beschichtung auf Anfrage Pneumatic actuator with aluminium housing - series B, PTFE coated housing upon request
39www.laeufer-ag.de
41
Aufgrund der günstigen Durchflusskenn-linie eignen sich LIAG® Bogenventile besonders zum Dosieren von zähen und pastösen Medien. Je nach Konsistenz des zu dosierenden Mediums sind LIAG® Bogenventile zum Regeln mit unterschied-lichen Schließerqualitäten und Linearisie-rungseinsätzen lieferbar. Geregelt wird standardmäßig mit einem 4-20 mA (0-10V) Elektroantrieb. Selbstverständlich kann die Regelkennlinie / Durchfluss-menge bzw. der Regelbereich individu-ellen Kundenanforderungen angepasst werden.
Merkmale• Keine Toträume• CIP/SIP-fähige Konstruktion• Produktschonende Dosierung • Keine Produkteinschlüsse und
Einklemmen von Feststoffen• Durchflusskennlinie optional
vollständig linearisierbar • Minimum an Bau- und Verschleißteilen• Eingeschweißt komplett zerlegbar• Optional mit 3-A Zulassung nach FDA
Features• No dead pockets• CIP/SIP capability• Product-saving proportioning • No product remainders or sticking
of solid particles• Full linearization option of control
characteristic• Minimum number of components
and wearing parts • Can be completely dismantled even
when welded in place• Optionally with 3-A approval / FDA
On account of their favorable flow characteristic LIAG® arc valves are par-ticularly suited for proportioning viscous and pasty products. Depending on the product to be proportioned LIAG® control arc valves can be delivered with various shutter qualities and linearization inserts. Control is performed via a standard 4-20mA (0-10V) electric actuator. The control characteristic / rate of flow or the control range can be adapted to customer requirements.
42
2-Wege Regel-Bogenventil2-way control arc valve
DN 25 60 m3/h
DN 40 140 m3/h
DN 50 340 m3/h
DN 65 450 m3/h
DN 80 620 m3/h
DN 100 990 m3/h
100
80
60
40
20
00° 10° 20° 30° 40° 50° 60° 70° 80° 90°
Auslass: Standard „Rundloch“Outlet: Standard “full bore“
Auslass: mit Linearisierungseinsatz „Quadrat“Outlet: Linearization insert “square”
Auslass: mit Linearisierungseinsatz „Rechteck“Outlet: Linearization insert “rectangle”
Öffnungswinkel Absperrorgan
Shutter aperture angle
Kv-Wert [%]
Kv-value [%]
43
NennweitenDIN DN25 - DN 100 / SMS DN25 - DN102 / Zoll 1"- 4"
WerkstoffeProduktberührende Edelstahlteile:AISI 316L (1.4404 /1.4435)Andere Edelstahlteile: AISI 304 (1.4301)O-Ring Dichtungen: EPDM, FPM (Viton®), FEP, andere Qualitäten auf AnfrageSchliesser: Hostaflon® (PTFE TFM1600)
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
Temperatur Betriebstemperatur: 110°C (230°F)Kurzzeitig: 140°C (284°F) - Optional bis 160°C (320°F)
BetriebsdruckDruck hinter Federbogen:10 bar (145 psi) - Optional bis 15 bar (217,5 psi)Druck gegen Federbogen:3 bar (43,5 psi) - Optional bis 5 bar (72,5 psi)
Ausführungen2-Wege
AntriebElektrischer Stellantrieb mit MOD Stellungsregler 4-20mA (0-10V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC- Ausführung auf Anfrage)
VentilanschlussartenSchweissende: DIN, SMS, ZollGewinde: DIN 11851, SMS 1145Clamp: Tri-Clamp
Weitere Optionen• Linearisierungseinsatz - Kennlinienanpassung • Beheizbare Ausführung• Schließerwerkstoff; alternativ Teflon (GL25) glasfaserver-
stärkt, Fluorosint® 207, Tecapeek®, Techtron®• Pneumatikantrieb mit elektropneumatischem
Stellungsregler• Leckageüberwachung der beweglichen O-Ring Dichtung/
Dampfsperre• Kugellagergeführte Schaltwelle
QualitätsüberwachungNeben fertigungstechnischen Qualitätssicherungsmass-nahmen (DIN EN ISO 9001) wird jedes Ventil vor Auslieferung auf Funktion und Dichtheit nach DIN 3230/BN geprüft.
Nominal sizesDIN DN25 - DN 100 / SMS DN25 - DN102 / Inch 1" - 4"
MaterialsInox parts in contact with product:AISI 316L (1.4404 /1.4435)Other inox parts:AISI 304 (1.4301)O-ring seals: EPDM, FPM (Viton®), FEP, other grades upon requestShutter: Hostaflon® (PTFE TFM1600)
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
TemperatureOperating temperature: 110°C (230°F) Short-term: 140°C (284°F) – optionally up to160°C (320°F)
Operating pressurePressure behind arc:10 bar (145 psi) - optionally up to 15 bar (217,5 psi)Pressure against arc: 3 bar (43,5 psi) - optionally up to 5 bar (72,5 psi)
Versions2-way
ActuatorsElectric actuator with MOD positioner 4-20mA (0-10V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC- version upon request)
Valve connection Welded ends: DIN, SMS, InchMale ends: DIN 11851, SMS 1145Clamp connection: Tri-Clamp Options• Linearization insert - mechanical adaptation of
control characteristic• Heated version• Shutter material; alternatively glass-fiber reinforced
Teflon (GL25), Fluorosint® 207, Tecapeek®, Techtron®• Pneumatic actuator with electric positioning control• Leakage control of moving O-ring seal / steam barrier• Ball-bearing supported selector shaft
Quality controlIn addition to the assurance measures during production (DIN EN ISO 9001), every single valve is inspected for proper function and tightness in accordance with DIN 3230/BN before shipment.
44
2-Wege Regel-Bogenventil Serie 21, elektrisch, Schweißende DIN 118502-way control arc valve series 21, electric, welded ends DIN 11850
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D52Ae21 26 29 435 50 128 130
40 40D52Ae21 38 41 470 65 160 130
50 50D52Ae21 50 53 475 70 170 130
65 65D52Ae21 66 70 500 80 208 130
80 80D52Ae21 81 85 520 90 230 130
100 100D52Ae21 100 104 550 110 270 130
Elektrischer Stellantrieb Serie E mit MOD Stellungsregler 4-20 mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-Ausführung auf Anfrage)Electric actuator series E with MOD positioner 4-20mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-version upon request)
2-Wege Regel-Bogenventil Serie 21, elektrisch, Gewinde DIN 118512-way control arc valve series 21, electric, male ends DIN 11851
DN Typ Type Ø d1 Ø d2 H h L L1
25 25D520Ae21 26 52 435 50 136 130
40 40D520Ae21 38 65 470 65 164 130
50 50D520Ae21 50 78 475 70 187 130
65 65D520Ae21 66 95 500 80 233 130
80 80D520Ae21 81 110 520 90 263 130
100 100D520Ae21 100 130 550 110 311 130
Elektrischer Stellantrieb Serie E mit MOD Stellungsregler 4-20 mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-Ausführung auf Anfrage)Electric actuator series E with MOD positioner 4-20mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-version upon request)
2-Wege Regel-Bogenventil Serie 21, elektrisch, Schweißende SMS2-way control arc valve series 21, electric, welded ends SMS
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S52Ae21 22,5 25 435 50 110 130
38 38S52Ae21 35,5 38 470 65 140 130
51 51S52Ae21 48,5 51 475 70 164 130
63 63S52Ae21 60,5 63,5 490 75 210 130
76 76S52Ae21 72 76 500 80 220 130
102 102S52Ae21 98 102 550 110 300 130
Elektrischer Stellantrieb Serie E mit MOD Stellungsregler 4-20 mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-Ausführung auf Anfrage)Electric actuator series E with MOD positioner 4-20mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-version upon request)
www.laeufer-ag.de 45
2-Wege Regel-Bogenventil Serie 21, elektrisch, Schweißende 2-way control arc valve series 21, electric, welded ends
DN Typ Type Ø d1 Ø d2 H h L L1
1“ 25C52Ae21 22,2 25,4 435 50 110 130
1½“ 38C52Ae21 34,9 38,1 470 65 140 130
2“ 51C52Ae21 47,5 50,8 475 70 164 130
2½“ 63C52Ae21 60,2 63,5 490 75 210 130
3“ 76C52Ae21 72,9 76,2 500 80 220 130
4“ 102C52Ae21 97,4 101,6 550 110 310 130
Elektrischer Stellantrieb Serie E mit MOD Stellungsregler 4-20 mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-Ausführung auf Anfrage)Electric actuator series E with MOD positioner 4-20mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-version upon request)
2-Wege Regel-Bogenventil Serie 21, elektrisch, TC-Clamp2-way control arc valve series 21, electric, TC-clamp
DN Typ Type Ø d1 Ø D H h L L1
1“ 25C520Ae21 22,2 50,5 435 50 135,4 130
1½“ 38C520Ae21 34,9 50,5 470 65 165,4 130
2“ 51C520Ae21 47,5 64 475 70 189,4 130
2½“ 63C520Ae21 60,2 77,5 490 75 235,4 130
3“ 76C520Ae21 72,9 91 500 80 245,4 130
4“ 102C520Ae21 97,4 119 550 110 335,4 130
Elektrischer Stellantrieb Serie E mit MOD Stellungsregler 4-20 mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-Ausführung auf Anfrage)Electric actuator series E with MOD positioner 4-20mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-version upon request)
2-Wege Regel-Bogenventil Serie 21, elektrisch, Gewinde SMS 11452-way control arc valve series 21, electric, male ends SMS 1145
DN Typ Type Ø d1 Ø d2 H h L L1
25 25S520Ae21 22,5 40 435 50 110 130
38 38S520Ae21 35,5 60 470 65 140 130
51 51S520Ae21 48,5 70 475 70 164 130
63 63S520Ae21 60,5 85,5 490 75 210 130
76 76S520Ae21 72 98 500 80 220 130
102 102S520Ae21 98 132 550 110 300 130
Elektrischer Stellantrieb Serie E mit MOD Stellungsregler 4-20 mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-Ausführung auf Anfrage)Electric actuator series E with MOD positioner 4-20mA (0-10 V), 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC-version upon request)
47
48
O-Ring für VentildeckelO-ring for bearing cap
LagerbuchseBearing bush
O-Ring VentilspindelO-ring for pivoted axle
SchließerShutter
O-Ring für KonusO-ring for cone
O-Ring für KonusO-ring for cone
SchließerShutter
O-Ring VentilspindelO-ring for pivoted axle
LagerbuchseBearing bush
O-Ring für VentildeckelO-ring for bearing cap
49www.laeufer-ag.de 49
DN Typ Type
25 25 1" 25SD502S21E
40 38 1½" 38-40SD502S21E
50 51 2" 50-51SD502S21E
63 2½" 63S502S21E
65 76 3" 65-76SD502S21E
80 80D502S21E
100 102 4" 100-102SD502S21E
150 6" 150D502E
EPDM O-Ring SetEPDM O-ring set
O-Ring Set EPDMBestehend aus: 1x O-Ring für Ventilspindel* 1x O-Ring für Ventildeckel1x O-Ring für Konus
O-ring set EPDMConsists of:1x O-ring for pivoted axle*1x O-ring for bearing cap 1x O-ring for cone
DN Typ Type
25 25 1" 25SD502S21V
40 38 1½" 38-40SD502S21V
50 51 2" 50-51SD502S21V
63 2½" 63S502S21V
65 76 3" 65-76SD502S21V
80 80D502S21V
100 102 4" 100-102SD502S21V
150 6" 150D502V
O-Ring Set FPM (Viton®)Bestehend aus: 1x O-Ring für Ventilspindel* 1x O-Ring für Ventildeckel1x O-Ring für Konus
O-ring set FPM (Viton®)Consists of:1x O-ring for pivoted axle*1x O-ring for bearing cap 1x O-ring for cone
O-Ring Set FEPBestehend aus: 1x O-Ring für Ventilspindel* 1x O-Ring für Ventildeckel1x O-Ring für Konus
O-ring set FEPConsists of:1x O-ring for pivoted axle*1x O-ring for bearing cap 1x O-ring for cone
DN Typ Type
25 25 1" 25SD502S21FEP
40 38 1½" 38-40SD502S21FEP
50 51 2" 50-51SD502S21FEP
63 2½" 63S502S21FEP
65 76 3" 65-76SD502S21FEP
80 80D502S21FEP
100 102 4" 100-102SD502S21FEP
150 6" 150D502FEP
FPM (Viton®) O-Ring Set FPM (Viton®) O-ring set
FEP O-Ring Set FEP O-ring set
* Hinweis:Bei Bogenventilen mit „Leckageüber-wachung der beweglichen O-Ring Dich-tung“ sind im O-Ring Set zwei O-Ringe für die Ventilspindel enthalten.
* Please note:For arc valves with ”leakage control of the moving O-ring seal“, the O-ring set con-tains two O-rings for the pivoted axle.
50
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Bogenventile (Regel-Bogenventile) und Molchweichen
For arc valves (control arc valves) and pigging valves
DN Typ Type
25 25 1" 25SD501T
40 38 1½" 38-40SD501T
50 51 2" 50-51SD501T
63 2½" 63S501T
65 76 3" 65-76SD501T
80 80D501T
100 102 4" 100-102SD501T
150 6" 150D501T
PTFE TFM1600 (Hostaflon®) Schließer PTFE TFM1600 (Hostaflon®) shutter
DN Typ Type
25 25 1" 25SD501G
40 38 1½" 38-40SD501G
50 51 2" 50-51SD501G
63 2½" 63S501G
65 76 3" 65-76SD501G
80 80D501G
100 102 4" 100-102SD501G
150 6" a.A. upon request
PTFE GL25 Schließer (glasfaserverstärkt) PTFE GL25 shutter (glass-fiber reinforced)
DN Typ Type
25 25 1" 25SD501H
40 38 1½" 38-40SD501H
50 51 2" 50-51SD501H
63 2½" 63S501H
65 76 3" 65-76SD501H
80 80D501H
100 102 4" 100-102SD501H
Techtron® Schließer Techtron® shutter
DN Typ Type
25 25 1" 25SD501P
40 38 1½" 38-40SD501P
50 51 2" 50-51SD501P
63 2½" 63S501P
65 76 3" 65-76SD501P
80 80D501P
100 102 4" 100-102SD501P
Tecapeek® Schließer Tecapeek® shutter
www.laeufer-ag.de 51
5
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Bogenventile (Regel-Bogenventile) und Molchweichen
For arc valves (control arc valves) and pigging valves
DN Typ Type
25 25 1" 25SD503
40 38 1½" 38-80SD503
50 51 2" 38-80SD503
65 63 2½" 38-80SD503
80 76 3" 38-80SD503
100 102 4" 100-102SD503
Lagerbuchse aus POM (Polyacetal) Bearing bush POM (Polyacetal)
DN Typ Type
25 25 1" 25SD503T
40 38 1½" 38-80SD503T
50 51 2" 38-80SD503T
65 63 2½" 38-80SD503T
80 76 3" 38-80SD503T
100 102 4" 100-102SD503T
Lagerbuchse aus PTFE (Teflon®) Bearing bush PTFE (Teflon®)
DN Typ Type
25 25 1" 25-150SL
40 38 1½" 25-150SL
50 51 2" 25-150SL
65 63 2½" 25-150SL
80 76 3" 25-150SL
100 102 4" 25-150SL
Stirnlochschlüssel zum Montieren der Anzugsmutter Assembling tool for the pinching nut
DN Typ Type
25 25 1" 25SD501F
40 38 1½" 38-40SD501F
50 51 2" 50-51SD501F
63 2½" 63S501F
65 76 3" 65-76SD501F
80 80D501F
100 102 4" 100-102SD501F
Fluorosint® 207 Schließer (auf Anfrage) Fluorosint® 207 shutter (upon request)
52
DN L1 h Typ Type
25 25 1" 160 51 25-40SD506-90
40 38 1½" 160 51 25-40SD506-90
50 51 2" 190 51 50-63SD506-90
63 2½" 190 51 50-63SD506-90
65 76 3" 190 51 65-80SD506-90
80 190 51 65-80SD506-90
100 102 4" 270 51 100-102SD506-90
150 6" 270 55 150D506-90
Standard Handhebel, 4 x 90° Standard handle, 4 x 90°
DN L1 h Typ Type
25 25 1" 160 51 25-40SD506-90R
40 38 1½" 160 51 25-40SD506-90R
50 51 2" 190 51 50-63SD506-90R
63 2½" 190 51 50-63SD506-90R
65 76 3" 190 51 65-80SD506-90R
80 190 51 65-80SD506-90R
100 102 4" 270 51 100-102SD506-90R
150 6" 270 55 150D506-90R
Standard Handhebel mit Rückmeldehalter M12, 0°-90° Standard handle with feedback bracket M12, 0°-90°
DN Typ Type Ø d1 Ø d2 H h L L1
25 25 1" 9005P002L/F 89 50 205 175 80 50
40 38 1½" 9005P002L/F 89 50 205 175 80 50
50 51 2" 9005P004L/F 104 50 205 175 80 50
63 2½" 9005P004L/F 104 50 205 175 80 50
65-80 76 3" 9005P006L/F 129 50 260 230 80 70
100 102 4" 100G133 L/F * 132 70 259 220 Ø 90
Edelstahlantrieb-Serie KH luftöffnend / federschließend 0° – 90° Stainless steel actuator series KH, air to open / spring to close 0° – 90°
DN Typ Type Ø d1 Ø d2 H h L L1
25 25 1" 9005P002L/L 89 50 205 175 80 50
40 38 1½" 9005P002L/L 89 50 205 175 80 50
50 51 2" 9005P004L/L 104 50 205 175 80 50
63 2½" 9005P004L/L 104 50 205 175 80 50
65-80 76 3" 9005P006L/L 129 50 260 230 80 70
100 102 4" 9005P006L/L100 129 70 260 230 80 70
Edelstahlantrieb-Serie KH luftöffnend / luftschließend 0° – 90° Stainless steel actuator series KH, air to open / air to close 0° – 90°
* Edelstahlantrieb Serie KHG / Stainless steel actuator series KHG
www.laeufer-ag.de 53
5
DN Typ Type G L
25 25 1" 25-63MVB230A G 1/8 6,5
40 38 1½" 25-63MVB230A G 1/8 6,5
50 51 2" 25-63MVB230A G 1/8 6,5
63 2½" 25-63MVB230A G 1/8 6,5
65-80 76 3" 65-102MVB230A G 1/4 9,5
100 102 4" 65-102MVB230A G 1/4 9,5
3/2 Magnetventil mit Gerätesteckdose, 230V AC für Edelstahlantrieb-Serie KH3/2 Solenoid valve with cable plug, 230V AC for stainless steel actuator series KH
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Bogenventile For arc valves
DN Typ Type SPS ASI Interbus
25 25 1" 25-102E0678 a. A.upon request
a. A.upon request
a. A.upon request
40 38 1½" 25-102E0678 a. A.upon request
a. A.upon request
a. A.upon request
50 51 2" 25-102E0678 a. A.upon request
a. A.upon request
a. A.upon request
63 2½" 25-102E0678 a. A.upon request
a. A.upon request
a. A.upon request
65-80 76 3" 25-102E0678 a. A.upon request
a. A.upon request
a. A.upon request
100 102 4" 25-102E0678 a. A.upon request
a. A.upon request
a. A.upon request
TOP-Prozesssteuerkopf für Edelstahlantrieb-Serie KH Process control TOP for stainless steel actuator series KH
DN Typ Type G L
25 25 1" 25-63MVB24D G 1/8 6,5
40 38 1½" 25-63MVB24D G 1/8 6,5
50 51 2" 25-63MVB24D G 1/8 6,5
63 2½" 25-63MVB24D G 1/8 6,5
65-80 76 3" 65-102MVB24D G 1/4 9,5
100 102 4" 65-102MVB24D G 1/4 9,5
3/2 Magnetventil mit Gerätesteckdose, 24V DC für Edelstahlantrieb-Serie KH3/2 Solenoid valve with cable plug, 24V DC for stainless steel actuator series KH
DN Typ Type G L
25 25 1" 25-63MVB110A G 1/8 6,5
40 38 1½" 25-63MVB110A G 1/8 6,5
50 51 2" 25-63MVB110A G 1/8 6,5
63 2½" 25-63MVB110A G 1/8 6,5
65-80 76 3" 65-102MVB110A G 1/4 9,5
100 102 4" 65-102MVB110A G 1/4 9,5
3/2 Magnetventil mit Gerätesteckdose, 110V AC für Edelstahlantrieb-Serie KH3/2 Solenoid valve with cable plug, 110V AC for stainless steel actuator series KH
54
DN Typ Type
25 25 1" 25-102M55C
40 38 1½" 25-102M55C
50 51 2" 25-102M55C
65 63 2½" 25-102M55C
80 76 3" 25-102M55C
100 102 4" 25-102M55C
Induktiver Näherungsschalter M12 aus Kunststoff, 20-250V AC für Antrieb Serie KH und KHG Inductive proximity switch M12, plastic, 20-250V AC for actuator series KH and KHG
DN Typ Type
25 25 1" 25-102M55BSt
40 38 1½" 25-102M55BSt
50 51 2" 25-102M55BSt
65 63 2½" 25-102M55BSt
80 76 3" 25-102M55BSt
100 102 4" 25-102M55BSt
Induktiver Näherungsschalter M12 aus Metall, 24V DC für Antrieb Serie KH und KHG Inductive proximity switch M12, metal, 24V DC for actuator series KH and KHG
DN Typ Type
25 25 1" 25-102M55ExSt
40 38 1½" 25-102M55ExSt
50 51 2" 25-102M55ExSt
65 63 2½" 25-102M55ExSt
80 76 3" 25-102M55ExSt
100 102 4" 25-102M55ExSt
Induktiver Näherungsschalter M12 aus Metall, 8,2V DC für Antrieb Serie KH und KHG, Ex Inductive proximity switch M12, metal, 8,2V DC for actuator series KH and KHG, Ex
DN Typ Type
25 25 1" 25-102M55B
40 38 1½" 25-102M55B
50 51 2" 25-102M55B
65 63 2½" 25-102M55B
80 76 3" 25-102M55B
100 102 4" 25-102M55B
Induktiver Näherungsschalter M12 aus Kunststoff, 24V DC für Antrieb Serie KH und KHG Inductive proximity switch M12, plastic, 24V DC for actuator series KH and KHG
www.laeufer-ag.de 55
DN L H Typ Type
25 25 1" 161 151 25KB51
40 38 1½" 180 159 38-51KB51
50 51 2" 180 159 38-51KB51
63 2½" 209 168 63-76KB51
65 76 3" 209 168 63-76KB51
80 222 191 80KB51
100 102 4" 222 191 100-102KB51
DN L H Typ Type
25 25 1" 161 151 25-63KB50
40 38 1½" 161 151 25-63KB50
50 51 2" 161 151 25-63KB50
63 2½" 161 151 25-63KB50
65 76 3" 209 168 65-80KB50
80 209 168 65-80KB50
100 102 4" 209 168 100-102KB50
150 6" 345 187 150KA50
Pneumatikantrieb mit Aluminiumgehäuse Serie B, luftöffnend/federschließend, 0° – 90° Pneumatic actuator with aluminium housing series B, air to open/spring to close, 0° – 90°
Pneumatikantrieb mit Aluminiumgehäuse Serie B, luftöffnend/luftschließend, 0° – 90° Pneumatic actuator with aluminium housing series B, air to open/air to close, 0° – 90°
Gehäuse mit PTFE Beschichtung auf Anfrage / PTFE coated housing upon request
DN L H Typ Type
25 25 1" 344 151 25-63KB52
40 38 1½" 344 151 25-63KB52
50 51 2" 344 151 25-63KB52
63 2½" 344 151 25-63KB52
65 76 3" 441 168 65-80KB52
80 441 168 65-80KB52
100 102 4" 441 168 100-102KB52
150 6" 631 211 150KB52
DN L H Typ Type
25 25 1" 194 125 25-63KB180
40 38 1½" 194 125 25-63KB180
50 51 2" 235 151 25-63KB180
63 2½" 268 159 25-63KB180
65 76 3" 311 168 65-80KB180
80 311 168 65-80KB180
100 102 4" 311 168 100-102KB180
150 6" 448 211 150KB180
Dreipositions-Pneumatikantrieb mit Aluminiumgehäuse Serie B, luftöffnend/ luftschließend, 0° - 90° - 180° 3-position operation pneumatic actuator with aluminium housing series B, air to open/air to close, 0° - 90° - 180°
Gehäuse mit PTFE Beschichtung auf Anfrage / PTFE coated housing upon request
Pneumatikantrieb mit Aluminiumgehäuse Serie B, luftöffnend/luftschließend, 0° –180°Pneumatic actuator with aluminium housing series B, air to open/air to close, 0° – 180°
Gehäuse mit PTFE Beschichtung auf Anfrage / PTFE coated housing upon request
Gehäuse mit PTFE Beschichtung auf Anfrage / PTFE coated housing upon request
56
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Bogenventile For arc valves
DN Typ Type
25 25 1" 25-102M55A
40 38 1½" 25-102M55A
50 51 2" 25-102M55A
65 63 2½" 25-102M55A
80 76 3" 25-102M55A
100 102 4" 25-102M55A
150 6" 25-102M55A
DN Typ Type
25 25 1" 25-102M55AT
40 38 1½" 25-102M55AT
50 51 2" 25-102M55AT
65 63 2½" 25-102M55AT
80 76 3" 25-102M55AT
100 102 4" 25-102M55AT
150 6" 25-102M55AT
Induktiver Näherungsschalter (Doppelsensor), 8,2V DC für Pneumatikantrieb Serie B, Ex Inductive proximity switch (double sensor), 8,2V DC for pneumatic actuator series B, Ex
Induktiver Näherungsschalter (Doppelsensor), 20-250V AC für Pneumatikantrieb Serie B Inductive proximity switch (double sensor), 20-250V AC for pneumatic actuator series B
DN Typ Type
25 25 1" 25-102M55
40 38 1½" 25-102M55
50 51 2" 25-102M55
65 63 2½" 25-102M55
80 76 3" 25-102M55
100 102 4" 25-102M55
150 6" 25-102M55
Induktiver Näherungsschalter (Doppelsensor), 24V DC für Pneumatikantrieb Serie BInductive proximity switch (double sensor), 24V DC for pneumatic actuator series B
DN D H Typ Type
25 25 1" 65 50 25-150SN65
40 38 1½" 65 50 25-150SN65
50 51 2" 65 50 25-150SN65
65 63 2½" 65 50 25-150SN65
80 76 3" 65 50 25-150SN65
100 102 4" 65 50 25-150SN65
150 6" 65 50 25-150SN65
Schaltnocken für Pneumatikantrieb Serie B, 0°-90° (180°) Target puck for pneumatic actuator series B, 0°-90° (180°)
www.laeufer-ag.de 57
DN Typ Type
25 25 1" 25-102SBE
40 38 1½" 25-102SBE
50 51 2" 25-102SBE
65 63 2½" 25-102SBE
80 76 3" 25-102SBE
100 102 4" 25-102SBE
150 6" 150SBE
Elektropneumatischer Stellungsregler für Pneumatikantrieb Serie B, 4-20mA / 24V DC Electropneumatic positioner for pneumatic actuator series B, 4-20mA / 24V DC
DN Typ Type
25 25 1" 25W
40 38 1½" 38-51W
50 51 2" 38-51W
65 63 2½" 63-80W
80 76 3" 63-80W
100 102 4" 100W
Verschleißteilesatz für Pneumatikantrieb Serie BSet of wearing parts for pneumatic actuator series B
Bestehend aus: 2 x Kolben-Führungsring 2 x Führungssegment1 x Gleitring „oben“1x Gleitring „unten“
Consists of:2 x piston guiding ring2 x guiding segment 1 x slip ring “top“1 x slip ring “bottom“
DN Typ Type
25 25 1" 25OR
40 38 1½" 38-51OR
50 51 2" 38-51OR
65 63 2½" 63-80OR
80 76 3" 63-80OR
100 102 4" 100OR
O-Ring Set für Pneumatikantrieb Serie B O-ring set for pneumatic actuator series B
Bestehend aus: 2 x Deckeldichtung 2 x O-Ring „Kolben“2 x O-Ring „Antriebsritzel“2 x O-Ring „Einstellschraube“1 x O-Ring „innere Endlageneinstellung“
Consists of:2 x gasket for cap2 x O-ring “piston“2 x O-ring “drive pinion“2 x O-ring “adjusting screw“1 x O-ring “inside end position adjustment“
Ohne Bild / without picture
58
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Bogenventile For arc valves
DN Typ Type
40 38 1½" 38-40SD510
50 51 2" 50-51SD510
63 2½" 63S510
65 76 3" 65-76SD510
80 80D510
Ventildeckel mit kugellagergeführter Schaltwelle und Leckageraum zur Überwachung der beweglichen O-Ring Dichtung Bearing cap with ball bearing supported selector shaft and leakage control of the moving O-ring seal
DN Typ Type
40 38 1½" 6005LHA D2 C4
50 51 2" 6005LHA D2 C4
63 2½" 6005LHA D2 C4
65 76 3" 6005LHA D2 C4
80 6005LHA D2 C4
Rillenkugellager für Ventildeckel mit LeckageraumGrooved ball bearing for bearing cap with leakage chamber
DN Typ Type
40 38 1½" 25-102AVU
50 51 2" 25-102AVU
63 2½" 25-102AVU
65 76 3" 25-102AVU
80 25-102AVU
Elektronische Überwachungseinheit AVU (Niveau- und Leitwertmessung) für Leckageüberwachung der beweglichen O-Ring Dichtung, 24V DC Electronic monitoring system AVU (level and conductance value control) for leakage control of the moving O-ring seal, 24V DC
Ohne Bild / without picture
O-Ring Set (EPDM / FPM (Viton®) / FEP) für Bogenventile mit „Leckageüberwachung der beweglichen O-Ring Dichtung“ (siehe Seite 49) O-ring set (EPDM / FPM (Viton®) / FEP) for arc valves with “leakage control of the moving O-ring seal“ (see page 49)
www.laeufer-ag.de 59
DN A Typ Type
25 25 1" G 1/8 25SD505H
40 38 1½" G 1/8 38-40SD505H
50 51 2" G 1/4 50-51SD505H
63 2½" G 1/4 63S505H
65 76 3" G 1/4 65-76SD505H
80 G 1/4 80D505H
100 102 4" G 1/4 100-102SD505H
150 6" G 1/4 150D505Ha.A. upon request
Beheizbarer Ventildeckel (Wasser/Dampf) Heated bearing cap (water/steam)
DN Typ Type
25 25 1" 25-76KE10
40 38 1½" 25-76KE10
50 51 2" 25-76KE10
63 2½" 25-76KE10
65 76 3" 25-76KE10
80 80-102KE10
100 102 4" 80-102KE10
150 6" 150KE10
Elektrischer Stellantrieb Serie E, 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC- Ausführung auf Anfrage) Electric actuator series E, 220-240V, 50/60Hz / IP65 / 0°-90° (110V AC- version upon request)
DN Typ Type
25 25 1" 4-20mAElo
40 38 1½" 4-20mAElo
50 51 2" 4-20mAElo
65 63 2½" 4-20mAElo
80 76 3" 4-20mAElo
100 102 4" 4-20mAElo
150 6" 4-20mAElo
MOD Stellungsregler 4-20mA (0-10V), 24V DC, für elektrischen Stellantrieb Serie EMOD positioner 4-20mA (0-10V), 24V DC, for electric actuator series E
Ohne Bild / without picture
60
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Molchweichen For pigging valves
DN L1 h Typ Type
40 38 1½" 160 51 38-40SD506-120
50 51 2" 190 51 50-63SD506-120
63 2½" 190 51 50-63SD506-120
65 76 3" 190 51 65-80SD506-120
80 190 51 65-80SD506-120
100 102 4" 270 51 100-102SD506-120
Standard Handhebel, 3 x 120° Standard handle, 3 x 120°
DN L1 h Typ Type
40 38 1½" 160 51 38-40SD506-120R
50 51 2" 190 51 50-63SD506-120R
63 2½" 190 51 50-63SD506-120R
65 76 3" 190 51 65-80SD506-120R
80 190 51 65-80SD506-120R
100 102 4" 270 51 100-102SD506-120R
Standard Handhebel mit Rückmeldehalter M12, 0°-120° Standard handle with feedback bracket M12, 0°-120°
DN L H Typ Type
40 38 1½" 182 155 38-63KB50V
50 51 2" 182 155 38-63KB50V
63 2½" 182 155 38-63KB50V
65 76 3" 236 172 65-80KB50V
80 236 172 65-80KB50V
100 102 4" 236 172 100-102KB50V
Pneumatikantrieb mit Aluminiumgehäuse Serie B, luftöffnend / luftschließend, 0° – 120° Pneumatic actuator with aluminium housing series B, air to open / air to close, 0° – 120°
Gehäuse mit PTFE Beschichtung auf Anfrage / PTFE coated housing upon request
DN L H Typ Type
40 38 1½" 410 156 38-63KB52V
50 51 2" 410 156 38-63KB52V
63 2½" 410 156 38-63KB52V
65 76 3" 528 172 65-80KB52V
80 528 172 65-80KB52V
100 102 4" 528 172 100-102KB52V
Dreipositions-Pneumatikantrieb mit Aluminiumgehäuse Serie B, luftöffnend / luftschließend, 0° - 120° - 240° 3-position pneumatic actuator with aluminium housing series B, air to open / air to close, 0° - 120° - 240°
Gehäuse mit PTFE Beschichtung auf Anfrage / PTFE coated housing upon request
www.laeufer-ag.de 61
5
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Molchweichen For pigging valves
DN Typ Type
40 38 1½" 25-102M55A
50 51 2" 25-102M55A
65 63 2½" 25-102M55A
80 76 3" 25-102M55A
100 102 4" 25-102M55A
DN Typ Type
40 38 1½" 25-102M55AT
50 51 2" 25-102M55AT
65 63 2½" 25-102M55AT
80 76 3" 25-102M55AT
100 102 4" 25-102M55AT
Induktiver Näherungsschalter (Doppelsensor), 8,2V DC für Pneumatikantrieb Serie B, Ex Inductive proximity switch (double sensor), 8,2V DC for pneumatic actuator series B, Ex
Induktiver Näherungsschalter (Doppelsensor), 20-250V AC für Pneumatikantrieb Serie B Inductive proximity switch (double sensor), 20-250V AC for pneumatic actuator series B
DN Typ Type
40 38 1½" 25-102M55
50 51 2" 25-102M55
65 63 2½" 25-102M55
80 76 3" 25-102M55
100 102 4" 25-102M55
Induktiver Näherungsschalter (Doppelsensor), 24V DC für Pneumatikantrieb Serie BInductive proximity switch (double sensor), 24V DC for pneumatic actuator series B
DN D H Typ Type
40 38 1½" 65 50 38-102SN53
50 51 2" 65 50 38-102SN53
63 2½" 65 50 38-102SN53
65 76 3" 65 50 38-102SN53
80 65 50 38-102SN53
100 102 4" 65 50 38-102SN53
Schaltnocken für Pneumatikantrieb Serie B, 0°-120° (240°) Target puck for pneumatic actuator series B, 0°-120° (240°)
62 6362
ERSATZTEILE uND ZuBEHÖR SPARE PARTS AND ACCESSORIES
Für Molchweichen For pigging valves
DN Typ Type
40 38 1½" 38-51W
50 51 2" 38-51W
65 63 2½" 63-80W
80 76 3" 63-80W
100 102 4" 100W
Verschleißteilesatz für Pneumatikantrieb Serie B Set of wearing parts for pneumatic actuator series B
Bestehend aus: 2 x Kolben-Führungsring 2 x Führungssegment1 x Gleitring „oben“1x Gleitring „unten“
Consists of:2 x piston guiding ring2 x guiding segment 1 x slip ring “top“1 x slip ring “bottom“
DN Typ Type
40 38 1½" 38-51OR
50 51 2" 38-51OR
65 63 2½" 63-80OR
80 76 3" 63-80OR
100 102 4" 100OR
O-Ring Set für Pneumatikantrieb Serie B O-ring set for pneumatic actuator series B
Bestehend aus: 2 x Deckeldichtung 2 x O-Ring „Kolben“2 x O-Ring „Antriebsritzel“2 x O-Ring „Einstellschraube“1 x O-Ring „innere Endlageneinstellung“
Consists of:2 x gasket for cap2 x O-ring “piston“2 x O-ring “drive pinion“2 x O-ring “adjusting screw“1 x O-ring “inside end position adjustment“
DN A Typ Type
40 38 1,5" G 1/8 38-40SDV505H
50 51 2" G 1/4 50-51SDV505H
63 2,5" G 1/4 63SV505H
65 76 3" G 1/4 65-76SDV505H
80 G 1/4 80DV505H
100 102 4" G 1/4 100-102SDV505H
Beheizbarer Ventildeckel (Wasser/Dampf) Heated bearing cap (water/steam)
www.laeufer-ag.de 63
65
Molchbare Prozesssysteme gewinnen für keimarme Verfahrenstechniken im-mer mehr an Bedeutung. Gestiegenes Umweltbewusstsein, kostenintensive Abwasseraufbereitung, Vermeidung vonteuren Produktverlusten und Rationali-sierungsmaßnahmen in der Produktion sind nur einige wenige Gründe hierfür. Entsprechend der Vielfalt verfahrens-technischer Prozesse bietet LIAG® ver-schiedene Molchtechnologien. Die op-timale Molchgeometrie und das geeig-nete Verfahren ist von verschiedenen prozesstechnischen Faktoren abhängig und wird projektspezifisch ausgelegt.
Process systems, which can be cleaned with pigs, are becoming increasingly im-portant for low-germ processes. Among other reasons, this is attributable to an increased environmental consciousness, costly waste water treatment, prevention of costly product losses, and production streamlining measures.LIAG® offers a variety of pigging technol-ogies to satisfy the requirementsof the wide range of processes. Optimumpigging geometry and the suitable pro-cess depend on different process factors and are therefore always designed to the specific project.
Merkmale• Maximale Produktrückgewinnung• Sichere Produkttrennung –
Vermeidung von Mischphasen• Steigerung der Produktqualität• Reduzierung zeitaufwendiger
Reinigungsvorgänge und Ab-wasserminimierung
• Umweltschonend
Features• Minimum product loss• Safe separation of product –
no mixed phases• Increase of product quality• Reduction of time-consuming
cleaning and waste water• Environmentally sound
6.1 DMV MolchsystemDMV Pigging System
Für keimarme Verfahren und viskose, schnell aushärtende MedienFor low-germ processes and highly viscous, fast hardening media
6.2 SMV MolchsystemSMV Pigging System
Für unkomplizierte MedienFor insensitive media
66
Sterile processes pose stringent hygienic demands on system components. For low-germ processes we offer DMV pig-ging systems featuring 3-A rated CIP/SIP LIAG® arc valves, pigging valves and specifically designed pig launching and receiving stations without dead pockets. By virtue of the modular component design, thread and clamp unions are vir-tually no longer needed. Typical hygienic risk areas are thus minimized from the very start. All valves, even when welded in place, can be taken apart and easily converted.
The product is pushed out with a dynamic 2-seal lip pig designed for the DMV pigging system.
Features• Closed and sterile pipe system with
CIP/SIP LIAG® arc and pigging valves • Optimized cleaning result by use
of dynamic lip pigs• 90° standard bends (R = 1,5 x D) can
be passed without any problem• The pig can be cleaned in the closed
system without removing it • DMV pigging systems are optimally
suited for low-germ processes and high viscous, fast hardening media, e.g. yoghurt, dressings, soft cheese, chocolate, toothpaste etc.
Dynamic lip pigs are extremely efficient cleaning systems and work practically without any wear.90° standard bends (R = 1,5 x D) can be passed without any problem. Differ-ent inside pipe diameters within a flow system are reliably compensated by the dynamic seal lips. In many places existing pipe systems can therefore be converted to cleaning with pigs without major expenditure.
As an option, dynamic lip pigs are equipped with a magnet for location and control and can be cleaned in the closed system without removing it.
In sterilen Verfahrensprozessen werden an Systemkomponenten besonders hohe Hygieneanforderungen gestellt. In DMV Molchsystemen werden deshalb ausschließlich totraumfreie CIP/SIP-fähige LIAG® Bogenventile und Molch-weichen mit optionaler 3-A Zulassung sowie entsprechend ausgelegte Molch-sende-und Empfangsstationen einge-setzt. Durch den modularen Aufbau aller Komponenten kann weitgehendst auf Rohrverschraubungen verzichtet werden, wobei sämtliche Ventile auch eingeschweißt zerlegbar bleiben und problemlos umgerüstet werden können. Hygienische Risikobereiche werden dadurch bereits im Vorfeld minimiert.
Das Ausschieben der Produktleitung erfolgt mit einem auf das DMV Molch-system ausgelegten dynamischen 2-Lippenmolch.
Merkmale• Geschlossenes und steriles Rohrlei-
tungssystem mit totraumfreienCIP/SIP-fähigen LIAG® Bogenventilen und LIAG® Molchweichen
• Maximale Reinigungsleistung durch Einsatz dynamisch abdichtender Lippenmolche
• 90° Standard Rohrbögen (R = 1,5 x D) sind problemlos molchbar
• Der Molch kann im geschlossenen System ohne Herausnehmen gereinigt werden
• DMV Molchsysteme sind optimal geeignet für keimarme Verfahren und hochviskose, schnell aushärtende Medien, z.B. Yoghurt, Dressings, Schmelzkäse, Schokolade, Zahnpasta etc.
Dynamische Lippenmolche haben eine sehr hohe Reinigungswirkung und arbeiten annähernd verschleißfrei. 90° Standardrohrbögen (R = 1,5 x D) sind problemlos passierbar; unterschiedliche Rohrinnendurchmesser innerhalb einer Produktleitung werden aufgrund dieser dynamischen Dichtlippen zuverlässig kompensiert. Vorhandene Rohrleitungen können somit vielerorts ohne größeren Aufwand molchbar gemacht werden.
Dynamische Lippenmolche sind optio-nal mit einem Magnetkern zur Ortung und Steuerung ausgerüstet und können in geschlossenen Systemen ohne Her-ausnehmen gereinigt werden.
67
EinwegOne way
(manuelle Molchrückführung)(manual return of pig)
EinfachschleifeSingle loop
(automatische Molchrückführung)(automatic return of pig)
DoppelschleifeDouble loop
(automatische Molchrückführung)(automatic return of pig)
RingsystemRing system
68
DMV Lippenmolche sind homogener Bauart (hygienic Design) mit hervorra-gender Reinigungswirkung und an-nähernder Verschleißfreiheit. Die Abdichtung erfolgt zuverlässig über dynamische Lippen, welche sich in Ab-hängigkeit des Schiebe- und Gegen-drucks aufstellen und vorhandene Ab-weichungen in der Rohrleitungsgeome-trie modellierend kompensieren. Die Molche sind sehr flexibel und für enge Radien (R=1,5xD) geeignet. Dyna-mische Lippenmolche sind optional mit eingegossenem Magnet zur Ortung und Steuerung ausgerüstet und im Werkstoff Silikon mit FDA-Zulassung in den Nennweiten 40-100 (1.5" – 4") lieferbar.
DMV lip pigs are of homogeneous con-struction (hygienic design). They offer excellent cleaning effect and are virtu-ally free of wear.Dynamic lips form a reliable sealing. As a function of the pushing and counter-pressure these lips accommodate perfectly, thereby compensating existing deviations in the pipe geometry. The pigs are highly flexible and suited for tight radii (R=1,5xD). As an option, dynamic lip pigs are equipped with a magnet for location and control. They are FDA-rated and available in silicone in the nominal widths 40-100 (1,5" – 4").
Features• Homogeneous silicone body • Reliable sealing due to dynamic seal
lips even for tight radii• Low wear and tear• Suitable for standard radii R = 1,5 x D
Merkmale• Homogener Silikonkörper • Zuverlässige Abdichtung durch
dynamische Dichtlippen auch bei engsten Radien
• Annähernd verschleißfrei • Geeignet für Standardradien R = 1,5 x D
Taillierung ermöglicht das Durchfahren von 90° Standardrohrbögen (R = 1,5 x D) The waist of the pig enables the passing of 90° standard bends (R = 1,5 x D)
Elastischer Kugelkopf (optional mit eingegossenem Magnetkern) zum Durchfahren von Rohrbögen und Auffangen in der Molchstation Elastic ball head (optional with magnet) for passing bends and bouncing against the catcher tee
Zwei dynamisch wirkende Dichtlippen zum Absperren zwischen Treibmedium und Produkt, sowie zum Überfahren von ÖffnungenTwo dynamically acting seal lips for medium-product separation and passing of exits
69
Entsprechend der Vielfalt verfahrenstech-nischer Prozesse werden die geeigneten Betriebsverfahren und die hierfür erfor-derlichen Stationen projektspezifisch ausgelegt.
Merkmale• Modulares Design
in Kompaktbauweise• CIP/SIP Funktion, d.h. der Molch
kann ohne Herausnehmen im geschlossenen System gereinigt und sterilisiert werden
• Minimale Anzahl von Bau- und Verschleißteilen
• Je nach Automationsgrad für einen oder mehrere Molche geeignet
To satisfy the diverse requirements of the wide range of processes, the optimum pigging method is always designed to the specific project.
Features• Modular, compact design• CIP/SIP function, i.e. the pig can be
cleaned and sterilized in the closed system without removing it
• Minimum number of components and wearing parts
• Depending on automation suited for one or various pigs
Molchbare 2-/3-WegeBogenventile und90°/120° Molchweichen
Maximale Hygiene in DMV Molchsys-temen gewährleisten totraum- und blockierfreie CIP/SIP fähige 2-/3-Wege Bogenventile und Molchweichen mit 3-A (FDA) Zulassung.
2- and 3-way arcvalves and90°/120° pigging valves
3-A (FDA) rated CIP/SIP 2-and 3-way arc valves and pigging valves without dead pockets and non-locking, warrant a high hygienic standard in DMV pigging systems.
Beispiel: Molchsende- und Empfangsstation (Molchschleuse) Example: pig launching and receiving station (pigging lock)
Merkmale• Hygienic Design CIP/SIP• Modularer Aufbau – einheitliche
Ersatz- und Verschleißteile egal ob für Bogenventile oder Molchweiche
Features• Hygienic design CIP/SIP• Modular configuration – standard spare
and wearing parts regardless of whether they are arc valves or pigging valves
DMV pig launchingand receiving station
70
KenndatenNennweiten: DIN DN 40 – DN 100 / SMS DN 38 – DN 102 / 1,5" – 4"Rohrbogenradius: Molchbar ab R = 1,5 x D Betriebsarten: Manuell, semi-automatisch oder vollständig automatisiertTreibmedien für DMV Molch: z.B. Produkt, Wasser, Luft etc.
Molchgeometrie LIAG® DMV Lippenmolch, speziell ausgelegt für das Molchen von hygienischen LIAG® Bogenventilen und LIAG® Molchweichen
Betriebsverfahren DMV Molchsystem* Einweg (manuelle Molchrückführung)* Einfachschleife (automatische Molchrückführung)* Doppelschleife (automatische Molchrückführung)* Ringsystem
WerkstoffeProduktberührende Edelstahlteile: AISI 316L (1.4404 / 1.4435)Andere Edelstahlteile: AISI 304 (1.4301)O-Ring Dichtungen: EPDM, FPM (Viton®), FEP, andere Qualitäten auf AnfrageSchließer Bogenventile und Molchweichen: Hostaflon® (PTFE TFM1600), alternativ: Teflon glasfaser- verstärkt (GL25), Fluorosint® 207, Tecapeek®, Techtron®DMV Lippenmolch: Silikon
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturbereichStandard: -25°C (-13°F) bis +110°C (+230°F)Optional: -25°C (-13°F) bis +150°C (+302°F)
Treibdruck/Schiebedruck DMV LippenmolchAbhängig von Produkt (Viskosität) und Leitungslänge: Min. 1 bar – Max. 10 bar (Min. 14,5 psi – Max. 145 psi)
LIAG® Leistungsumfang* Engineering* Sensorik* Steuerung * Montage* Bogenventile * Molchweichen* DMV Lippenmolch * Sendestation / Molchschleuse * Empfangsstation / Molchschleuse * Produktausschiebestation
71
Basic factsNominal sizes: DIN DN 40 – DN 100 / SMS DN 38 – DN 102 / 1,5" – 4" Radius of the bends: Piggable from R = 1,5 x D Multi-mode: Manual, semi automated or fully automatedDMV pig pushing media: e.g. product, water, air etc.
Design of the pig LIAG® DMV lip pig, specially designed to pass hygienic LIAG® arc valves and LIAG® pigging valves
Operation procedure DMV pigging system* One way (manual return of pig)* Single loop (automatic return of pig)* Double loop (automatic return of pig)* Ring system
MaterialsInox parts in contact with product: AISI 316L (1.4404 / 1.4435)Other stainless steel parts: AISI 304 (1.4301)O-ring seals: EPDM, FPM (Viton®), FEP, other grades upon requestShutter of arc valve and pigging valve: Hostaflon® (PTFE TFM1600) alternatively: glass-fiber rein- forced Teflon (GL25), Fluorosint® 207, Tecapeek®, Techtron®DMV lip pig: Silicone
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
Range of temperatureStandard: -25°C (-13°F) up to +110°C (+230°F)Optional: -25°C (-13°F) up to +150°C (+302°F)
Pushing pressure DMV lip pigDepending on product (viscosity) and length of the pipe work: Min. 1 bar – Max. 10 bar (Min. 14,5 psi – Max. 145 psi)
LIAG® scope of services* Engineering* Sensors* Control system* Assembling* Arc valves* Pigging valves* DMV lip pig* Launching station / Pig sluice* Receiving station / Pig sluice* Product pushout station
72
DN Typ Type
geeignet für ID suitable for ID
Ø d Ø D L L1 L2
40 38 1½" 38-40DV 36 - 40 34 40 164 74 73
50 51 2" 50-51DV 48 - 56 46 56 200 92 85
65 63 2½" 63-65DV 59 - 70 58 72 264 130 105
76 3" 76DV 72 - 79 69,5 80 288 128 125
DMV MolchsysteM DMV Pigging systeM
DN Typ Type
geeignet für ID suitable for ID
Ø d Ø D L L1 L2
40 38 1½" 38-40DMV 36 - 40 34 40 164 74 73
50 51 2" 50-51DMV 48 - 56 46 56 200 92 85
65 63 2½" 63-65DMV 59 - 70 58 72 264 130 105
76 3" 76DMV 72 - 79 69,5 80 288 128 125
80 80DMV 80 - 86 78,5 89 318,5 140 139
100 102 4" 100-102DMV 96 - 106 95 107 375 162 165,5
DMV Lippenmolch aus Silikon mit MagnetDMV silicone lip pig with magnet
DMV Lippenmolch aus Silikon ohne Magnet DMV silicone lip pig without magnet
www.laeufer-ag.de 73
6
DN Typ Type
40 38 1½" 38-100MSB12
50 51 2" 38-100MSB12
65 63 2½" 38-100MSB12
80 76 3" 38-100MSB12
100 102 4" 38-100MSB12
Magnetsensor zur Molchortung M12, 24V DC steckbar Magnet sensor for pig detection M12, 24V DC pluggable
DMV MolchsysteM DMV Pigging systeM
DN Typ Type
40 38 1½" 38-100MSB12T
50 51 2" 38-100MSB12T
65 63 2½" 38-100MSB12T
80 76 3" 38-100MSB12T
100 102 4" 38-100MSB12T
Magnetsensor zur Molchortung M12, 8,2V DC steckbar, Ex Magnet sensor for pig detection M12, 8,2V DC pluggable, Ex
DN Typ Type
40 38 1½" 38-102M55DSt
50 51 2" 38-102M55DSt
65 63 2½" 38-102M55DSt
80 76 3" 38-102M55DSt
100 102 4" 38-102M55DSt
Induktiver Näherungsschalter M8 aus Metall, 24V DC steckbar zur Blindmutterüberwachung Inductive proximity switch M8 of metal, 24V DC pluggable for blind nut detection
74
SMV Pendelmolchsysteme von LIAG® basieren auf dem Einsatz statischer Molche, welche angetrieben von einem Treibmedium (Produkt, Wasser, Luft) zwi-schen der Molchsende- und Empfangs-station pendeln und im Verlauf das in der Rohrleitung verbliebene Produkt gezielt ausschieben. SMV Pendelmolche sind statisch abdichtend mittels defi-niertem Übermaß zwischen Molchaus-sen- und Rohrinnen-Durchmesser.
LIAG’s SMV pendulum pigging systems are based on the use of static pigs which–driven by a medium (product, water, air)–move back and forth between the pig launching and receiving station, thereby eliminating the remaining product from the pipe. SMV pendulum pigs are stati-cally sealing by means of a defined over-size between the pig outside diameter and pipe inside diameter.
Features• Dead pocket minimized design • Various designs of SMV pigs
and material available• Suited for bends with radii R=3,0 x D• The pig can be cleaned in the closed
system without removing • SMV systems are optimally suited
for the beverage, cosmetics and paint industry
Merkmale• Hygienefreundliche Konstruktion
durch Einsatz totraumarmer Kugelventile
• Unterschiedliche SMV Molchgeo-metrien und Werkstoffe lieferbar
• Geeignet für Rohrbögen mit Radien ab R=3,0 x D
• Der Molch kann im geschlossenen System ohne Herausnehmen gereinigt werden
• SMV Pendelmolchsysteme eignen sich optimal für Getränke-, Kosmetik- und Farbindustrie etc.
Wesentlich zur Betriebssicherheit tragen die in SMV Pendelmolchsystemen ein-gesetzten Komponenten bei. Unter dem Aspekt maximaler Prozesssicher-heit ist der Einsatz totraumminimierter Kugelventile Standard. Statische Pen-delmolche sind optional mit einem Magnetkern zur Ortung und Steuerung ausgerüstet, und können in geschlos-senen Systemen ohne Herausnehmen gereinigt werden.
The components used in SMV pendulum pigging systems are essential to high operating safety. The use of ball valves with minimized dead pockets is stan-dard in view of maximum process safety. As an option, static pigs are equipped with a magnet for location and control and can be cleaned in the closed system without removing it.
Hin und ZurückBi-directional
75
SMV Pendelmolche sind homogener Bauart (hygienisches Design) und haben eine statische Abdichtung mittels definiertem Übermaß zwischen Molchaußen- und Rohrinnen-Durch-messer. Die Molche sind optional mit eingegossenem Magnet zur Ortung und Steuerung ausgerüstet.
SMV pendulum pigs are of homoge-neous construction (hygienic design). They are statically sealing by means of a defined oversize between the pig outside diameter and pipe inside dia-meter. As an option, SMV pigs are equipped with a magnet for location and control.
Merkmale• Homogener Silikonkörper• Geeignet für Radien R = 3,0 x D
Features• Homogeneous silicone body • Suitable for radii R = 3,0 x D
Qualitativ hochwertige Absperr- und Verteilkomponenten in Lebensmittel-ausführung, optional totraumminimiert durch PTFE Auskleidung und mit Spül-anschlüssen.
High quality shut-off and distribution components designed for the food in-dustry; as an option with PTFE lining for dead pocket minimization, and with cleaning port.
76
KenndatenNennweiten: DIN DN 40 – DN 150 / 2" – 4"Rohrbogenradius:: Molchbar ab R = 3,0 x DBetriebsarten: Manuell, semi-automatisch oder vollständig automatisiertTreibmedien für SMV Molch: z.B. Produkt, Wasser, Luft etc.
Molchgeometrie
LIAG® SMV Lamellenmolch mit statischer Abdichtung ausgelegt für das Molchen von Kugelventilen
Betriebsverfahren SMV Molchsystem* Pendelmolchsystem (Hin und Zurück)
WerkstoffeProduktberührende Edelstahlteile: AISI 316L (1.4404 / 1.4435)Andere Edelstahlteile: AISI 304 (1.4301)O-Ring Dichtungen:: EPDM, FPM (Viton®), FEP, andere Qualitäten auf AnfrageSMV Lamellenmolch: Silikon
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturbereichStandard: -25°C (-13°F) bis +110°C (+230°F)Optional: -25°C (-13°F) bis +150°C (+302°F)
Treibdruck/SchiebedruckAbhängig von Produkt (Viskosität) und Leitungslänge: Min. 2 bar – Max. 10 bar (Min. 29 psi – Max. 145 psi)
LIAG® Leistungsumfang* Engineering* Sensorik* Steuerung* Montage* Kugelventile* SMV Pendelmolch* Sendestation* Empfangsstation* Produktausschiebestation
77
Basic factsNominal sizes: DIN DN 40 – DN 150 / 2" – 4" Radius of the bends:: Piggable from R = 3,0 x DMulti-mode: Manual, semi automated or fully automatedSMV pig pushing media:: e.g. product, water, air etc.
Design of the pig
LIAG® SMV lamellar pig with static sealing designed to pass ball valves
Operation procedure SMV pigging system* Bi-directional
MaterialsInox parts in contact with product: AISI 316L (1.4404 / 1.4435)Other inox parts:: AISI 304 (1.4301)O-ring seals: EPDM, FPM (Viton®), FEP, other grades upon requestPSMV lamellar pig:: Silicone
SurfacesIn contact with product:: Ra 0,8 µm (Ra 32µin)
Range of temperatureStandard: -25°C (-13°F) up to +110°C (+230°F)Optional: -25°C (-13°F) up to +150°C (+302°F)
Pushing pressure SMV pigDepending on product (viscosity) and length of the pipe work:: Min. 2 bar – Max. 10 bar (Min. 29 psi – Max. 145 psi)
LIAG® scope of services * Engineering* Sensors* Control system* Assembling* Ball valves* SMV pendulum pig* Launching station* Receiving station* Product pushout station
78
DN Mit Magnetwith magnet
Ohne Magnet without magnet
Ø D L
40 40SMVL 40SVL 43 140
50 50SMVL 50SVL 51 120
65 65SMVL 65SVL 69 144
80 80SMVL 80SVL 84 168
100 100SMVL 100SVL 103 215
125 125SMVL 125SVL 128 305
SMV Lamellenmolch aus Silikon SMV silicone lamellar pig
DN Mit Magnetwith magnet
Ohne Magnet without magnet
Ø D L
2" 51SMVK 51SVK 49,5 64,6
50 50SMVK 50SVK 51,5 63
2 ½" 63SMVK 63SVK 63,5 82,7
65 65SMVK 65SVK 67 96
80 80SMVK 80SVK 82,5 100
100 100SMVK 100SVK 103,5 123,3
125 125SMVK 125SVK 127,5 152
150 150SMVK 150SVK 153 182
SMV Kugelmolch aus Silikon SMV silicone ball pig
DN Mit Magnetwith magnet
Ohne Magnet without magnet
Ø D L
2" 51SMVZ 51SVZ 49,5 80
2 ½" 63SMVZ 63SVZ 62,5 95
65 65SMVZ 65SVZ 67,5 95
3" 76SMVZ 76SVZ 74 115
80 80SMVZ 80SVZ 82,5 115
4" 102SMVZ 102SVZ 199,5 140
100 100SMVZ 100SVZ 101 140
SMV Zylindermolch aus Silikon SMV silicone cylinder pig
www.laeufer-ag.de 79
DN Typ Type
40 38 1½" 38-100MSB12
50 51 2" 38-100MSB12
65 63 2½" 38-100MSB12
80 76 3" 38-100MSB12
100 102 4" 38-100MSB12
DN Typ Type
40 38 1½" 38-100MSB12T
50 51 2" 38-100MSB12T
65 63 2½" 38-100MSB12T
80 76 3" 38-100MSB12T
100 102 4" 38-100MSB12T
Magnetsensor zur Molchortung M12, 8,2V DC steckbar, ExMagnet sensor for pig detection M12, 8,2V DC pluggable, Ex
DN Mit Magnetwith magnet
Ohne Magnet without magnet
Ø D L
32 32SMVS 32SVS 32 61
50 50SMVS 50SVS 51 98,5
65 65SMVS 65SVS 66,6 126,6
3" 76SMVS 76SVS 71,5 100
80 80SMVS 80SVS 82 158
4" 102SMVS 102SVS 101 200
100 100SMVS 100SVS 102,5 200
SMV Sphäromolch aus Silikon SMV silicone sphere pig
Magnetsensor zur Molchortung M12, 24V DC steckbar Magnet sensor for pig detection M12, 24V DC pluggable
81
7.1 RückschlagventileNon Return Valves
7.2 DrehrohreSwivel Joint Union (Turn Pipe)
7.3 SichtgläserSight Glasses
7.4 TeleskoprohreTelescope Pipes
82
LIAG® Rückschlagventile verhindern zu-verlässig Rückflüsse von Medien in Rohr-leitungen. Rückschlagventile der Serien 61A und 62A verfügen über eine 4-fach geführte metallische Tellerdichtung, welche bis 20 bar Betriebsdruck sicher und vollständig ein sogenanntes „Flat-tern“ verhindert. Serie 62B ist mit einer einfach geführten Metalltellerdichtung und Serie 62C mit Teflontellerdichtung lieferbar. LIAG® Rückschlagventile sind CIP-fähig und in Kompaktbauweise mit nur einem einzigen Handgriff zerlegbar.
LIAG® non return valves reliably prevent products from flowing back into pipes. Non return valves of the 61A and 62A series are provided with a 4-way con-trolled metallic disk seal which reliably prevent the so-called flutter effect up to an operating pressure of 20 bars (290 psi). The disk seal of the 62B series is in metal, that of the 62C series in Teflon. LIAG® non return valves have CIP capa-bility, feature a compact design and can be taken apart in a single step.
Merkmale• Geringer Strömungswiderstand / Druckverlust• Strömungsgünstige Innengehäuseform• CIP-fähig• Kompaktbauweise• Zerlegbar mit einem Handgriff• Robust und zuverlässig
Features• Minimum flow resistance / pressure drop• Hydrodynamic inner casing• CIP capability• Compact design• Taken apart in a single step• Robust and high reliability
83
NennweitenDIN DN25 - DN 80 / SMS DN25 - DN76
WerkstoffeAlle Edelstahlteile: AISI 316L (1.4404)O-Ring Dichtungen: EPDM, FPM (Viton®)
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturBetriebstemperatur: 110°C (230°F)Kurzzeitig: 140°C (284°F)
DruckBetriebsdruck: 20 bar max. (290 psi max.)
ÖffnungsdruckDN25 / 1" 0,18bar (2,6psi)DN40 / 38 / 1,5" 0,12bar (1,7psi)DN50 / 51 / 2" 0,08bar (1,2psi)DN65 / 63 / 2,5" 0,06bar (0,9psi)DN80 / 76 / 3" 0,05bar (0,7psi)
VentilanschlussartenSchweißende / Gewinde: DIN 11850 / DIN 11851Gewinde: DIN 11851, SMS 1145
Nominal sizesDIN DN25 - DN 80 / SMS DN25 - DN76
MaterialsAll stainless steel parts: AISI 316L (1.4404)O-ring seals: EPDM, FPM (Viton®)
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
TemperatureOperating temperature: 110°C (230°F)Short-term: 140°C (284°F)
PressureOperating pressure: 20 bar max. (290 psi max.)
Opening pressureDN25 / 1" 0,18bar (2,6psi)DN40 / 38 / 1,5" 0,12bar (1,7psi)DN50 / 51 / 2" 0,08bar (1,2psi)DN65 / 63 / 2,5" 0,06bar (0,9psi)DN80 / 76 / 3" 0,05bar (0,7psi)
Valve connectionWelded ends / Male ends: DIN 11850 / DIN 11851Male ends: DIN 11851, SMS 1145
Leistungsdiagramm LIAG® RückschlagventilDruckverlust p / Volumenstrom QPerformance chart LIAG® non return valvepressure drop p / volume flow Q
84
Rückschlagventil, 1x Schweißende DIN 11850 -1x Gewinde DIN11851Non return valve, 1x welded end DIN 11850 -1x male end DIN11851
DN Typ Type Ø d Ø D L p [bar]
25 25D61A 22 57 60 0,18
40 40D61A 36 70 62 0,12
50 50D61A 48,5 83 72 0,08
65 65D61A 60,5 100 82 0,05
80 80D61A 72 115 92 0,05
Rückschlagventil, 2x Gewinde DIN 11851Non return valve, 2x male ends DIN 11851
DN Typ Type Ø d Ø D L p [bar]
25 25D62A 22 57 60 0,18
40 40D62A 36 70 62 0,12
50 50D62A 48,5 83 72 0,08
65 65D62A 60,5 100 82 0,05
80 80D62A 72 115 92 0,05
4-fach geführte metallische Tellerdichtung4-way controlled metallic disk seal
4-fach geführte metallische Tellerdichtung4-way controlled metallic disk seal
www.laeufer-ag.de 85
Rückschlagventil, 2x Gewinde SMS 1145Non return valve, 2x male ends SMS 1145
DN Typ Type Ø d Ø D L p [bar]
25 25S62A 25 50 60 0,18
38 38S62A 39 65 62 0,12
Rückschlagventil, 2x Gewinde SMS 1145Non return valve, 2x male ends SMS 1145
DN Typ Type Ø d Ø D L p [bar]
51 51S62B 48 79 72 0,08
63 63S62B 60 90 82 0,06
76 76S62B 71 110 92 0,05
Rückschlagventil, 2x Gewinde SMS 1145Non return valve, 2x male ends SMS 1145
DN Typ Type Ø d Ø D L p [bar]
51 51S62C 48 79 72 0,08
63 63S62C 60 90 82 0,06
76 76S62C 71 110 92 0,05
4-fach geführte metallische Tellerdichtung4-way controlled metallic disk seal
1-fach geführte MetalltellerdichtungSingle controlled metallic disk seal
1-fach geführte TeflontellerdichtungSingle controlled teflon disk seal
ET I
RÜCKSCHLAGVENTILNON RETURN VALVE
ERSATZTEILESPAREPARTS
DN Typ Type
25 25 1" 25SD621A
40 38 1,5" 38-40SD621A
50 50D621A
65 65D621A
80 80D621A
4-fach geführte metallische Tellerdichtung4-way controlled metallic disk seal
Für Typen Rückschlagventile: XXD61A / XXD62A / XXS62AFor types of non return valves: XXD61A / XXD62A / XXS62A
DN Typ Type
51 2" 51S621B
63 2,5" 63S621B
76 3" 76S621B
1-fach geführte metallische Tellerdichtung1-way controlled metallic disk seal
Für Typ Rückschlagventil: XXS62BFor type of non return valve: XXS62B
DN Typ Type
51 2" 51S621C
63 2,5" 63S621C
76 3" 76S621C
1-fach geführte Teflontellerdichtung1-way controlled teflon disk seal
Für Typ Rückschlagventil: XXS62CFor type of non return valve: XXS62C
DN Typ Type
25 25 1" 25SD603B
40 38 1,5" 38-40SD603B
50 51 2" 50-51SD603B
65 63 2,5" 63-65SD603B
80 76 3" 76-80SD621A
Feder, zylindrischSpring, cylindric
Für Typen Rückschlagventile: XXD61A / XXD62A / XXS62A / XX62BFor types of non return valves: XXD61A / XXD62A / XXS62A / XX62B
DN Typ Type
51 2" 51S622C
63 2,5" 63S622C
76 3" 76S622C
Feder, konischSpring, conical
Für Typ Rückschlagventil: XXS62CFor type of non return valve: XXS62C
www.laeufer-ag.de ET II
7
ERSATZTEILESPAREPARTS
RÜCKSCHLAGVENTILNON RETURN VALVE
DN Typ Type
25 25 1" 25SD621A
40 38 1,5" 38-40SD621A
50 50D621A
65 65D621A
80 80D621A
4-fach geführte metallische Tellerdichtung4-way controlled metallic disk seal
Für Typen Rückschlagventile: XXD61A / XXD62A / XXS62AFor types of non return valves: XXD61A / XXD62A / XXS62A
DN Typ Type
51 2" 51S621B
63 2,5" 63S621B
76 3" 76S621B
1-fach geführte metallische Tellerdichtung1-way controlled metallic disk seal
Für Typ Rückschlagventil: XXS62BFor type of non return valve: XXS62B
DN Typ Type
51 2" 51S621C
63 2,5" 63S621C
76 3" 76S621C
1-fach geführte Teflontellerdichtung1-way controlled teflon disk seal
Für Typ Rückschlagventil: XXS62CFor type of non return valve: XXS62C
DN Typ Type
25 25 1" 25SD603B
40 38 1,5" 38-40SD603B
50 51 2" 50-51SD603B
65 63 2,5" 63-65SD603B
80 76 3" 76-80SD621A
Feder, zylindrischSpring, cylindric
Für Typen Rückschlagventile: XXD61A / XXD62A / XXS62A / XX62BFor types of non return valves: XXD61A / XXD62A / XXS62A / XX62B
DN Typ Type
51 2" 51S622C
63 2,5" 63S622C
76 3" 76S622C
Feder, konischSpring, conical
Für Typ Rückschlagventil: XXS62CFor type of non return valve: XXS62C
DN Typ Type
EPDM FPM (Viton®)
25 25D01003-E 25D01003-V
40 40D01003-E 40D01003-V
50 50D01003-E 50D01003-V
65 65D01003-E 65D01003-V
80 80D01003-E 80D01003-V
Dichtring, DIN 11851-GSeal ring, DIN 11851-G
Für Typen Rückschlagventile: XXD61A / XXD62AFor types of non return valves: XXD61A / XXD62A
DN Typ Type
EPDM FPM (Viton®)
25 1" 25S31004-E 25S31004-V
38 1,5" 38S31004-E 38S31004-V
51 2" 51S31004-E 51S31004-V
76 3" 76S31004-E 76S31004-V
Dichtring, SMS1145Seal ring, SMS1145
Für Typen Rückschlagventile: XXS62A / XXS62B / XXS63CFor types of non return valves: XXS62A / XXS62B / XXS63C
DN Typ Type
63 2,5" 63S624-N
Für Typen Rückschlagventile: XXS62B / XXS62CFor type of non return valve: XXS62B / XX62C
O-Ring NBR, untenBottom o-ring NBR
DN Typ Type
25 25 1" 25SD623-N
40 38 1,5" 38-40SD623-N
50 51 2" 50-51SD623-N
65 63 2,5" 63-65SD623-N
76 3" 76S623-N
O-Ring NBR, obenUpper o-ring NBR
Für Typen Rückschlagventile: XXD61A / XXD62A / XXS62A / XXS62B / XXS63CFor types of non return valves: XXD61A / XXD62A / XXS62A / XXS62B / XXS63C
ET III
RÜCKSCHLAGVENTILNON RETURN VALVE
DN Typ Type
25 25 1" 25SD601Y
40 38 1,5" 38-40SD601Y
50 51 2" 50-51SD601Y
65 63 2,5" 63-65SD601Y
80 76 3" 76-80SD601Y
Führungsring obenUpper guiding ring
Für Typen Rückschlagventile: XXD61A / XXD62A / XXS62A / XXS62B / XXS62CFor types of non return valves: XXD61A / XXD62A / XXS62A / XXS62B / XXS62C
DN Typ Type
51 1" 51S601A
63 1,5" 63S601A
76 2" 76S601A
Führungsring untenBottom guiding ring
Für Typen Rückschlagventile: XXS62B / XXS62CFor types of non return valves: XXS62B / XXS62C
86
LIAG® Drehrohre werden als drehbare Rohrverbindung eingesetzt. Die radiale Abstützung erfolgt durch Gleitringe aus Teflon. LIAG® Drehrohre sind CIP-fähig und haben eine Leckageöffnung zur Sichtkontrolle.
LIAG® swivel joint unions (turn pipe) are designed as a swivelling pipe connec-tion, e.g. in a flow panel. Teflon guided rings ensure radial shore. LIAG® swivel joint unions are of hygienic design (CIP) and equipped with a leakage hole for visual inspection.
Merkmale• Hygienisches Design / CIP-fähig• Leckageöffnung zur Sichtkontrolle• Kein Druckverlust• Molchbar mit LIAG® DMV Lippenmolch • Radiale Abstützung für leichtes Verdrehen
Features• Hygienic design / CIP capability• Leakage hole for visual inspection• No pressure loss• Designed to be passed with LIAG® DMV lip pig• Radial shore for easy turn
87
NennweitenDIN DN65 - DN 80 / SMS DN25 - DN102DIN DN25 - DN 50 und DN 100 auf Anfrage
WerkstoffeAlle Edelstahlteile: AISI 316L (1.4404)O-Ring Dichtungen: EPDM, FPM (Viton®) Führungsring: POM (Polyoxymethylen),
PTFE a.A.Gleitring: POM (Polyoxymethylen),
PTFE a.A.
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturBetriebstemperatur: 110°C (230°F)Kurzzeitig: 140°C (284°F)
DruckBetriebsdruck: 10 bar max. (145 psi max.)
VentilanschlussartenSchweißende: DIN, SMS
Nominal sizesDIN DN65 - DN 80 / SMS DN25 - DN102DIN DN25 - DN 50 and DN 100 upon request
MaterialsAll stainless steel parts: AISI 316L (1.4404)O-ring seals: EPDM, FPM (Viton®) Steering ring: POM (Polyoxymethylene), PTFE upon requestSlide ring: POM (Polyoxymethylene), PTFE upon request
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
TemperatureOperating temperature: 110°C (230°F)Short-term: 140°C (284°F)
Pressure:Operating pressure: 10 bar max. (145 psi max.)
Valve connectionWelded ends: DIN, SMS
88
Drehrohr, 2x Schweißende DIN 11850Swivel joint union, 2x welded ends DIN 11850
DN Typ Type Ø D1 Ø D2 L
25 25D76 a.A. upon request
40 40D76 a.A. upon request
50 50D76 a.A. upon request
65 65D76 66 70 104
80 80D76 81 85 104
100 100D76 a.A. upon request
Führungsring für DrehrohrSteering ring for swivel joint union
DN Typ Type Ø D1 Ø D2 L
25 a.A. upon request
40 a.A. upon request
50 a.A. upon request
65 76S761 76 85,5 18
80 80D761 85 92,5 18
100 a.A. upon request
Gleitring für DrehrohrSlip ring for swivel joint union
DN Typ Type Ø D1 Ø D2 L
25 a.A. upon request
40 a.A. upon request
50 a.A. upon request
65 76S762 78 82,5 5
80 80D762 85 89 5
100 a.A. upon request
O-Ring für DrehrohrO-ring for swivel joint union
DN Typ Type
EPDM FPM (Viton®)
25 a.A. upon request a.A. upon request
40 a.A. upon request a.A. upon request
50 a.A. upon request a.A. upon request
65 65-76SD763-E 65-76SD763-V
80 80D763-E 80D763-V
100 a.A. upon request a.A. upon request
Ohne Bild / without picture
www.laeufer-ag.de 89
Drehrohr, 2x Schweißende SMSSwivel joint union, 2x welded ends SMS
DN Typ Type Ø D1 Ø D2 L
25 25S76 22,5 25 98
38 38S76 35,5 38 98
51 51S76 48,5 51 104
63 63S76 60,5 63,5 104
76 76S76 72 76 104
102 102S76 97,6 101,6 108
Führungsring für DrehrohrSteering ring for swivel joint union
DN Typ Type Ø D1 Ø D2 L
25 25S761 25 32,5 18
38 38S761 38 46,5 18
51 51S761 51 59,5 18
63 63S761 63,5 72,5 18
76 76S761 76 85,5 18
102 102S761 101,6 113,5 23
Gleitring für DrehrohrSlip ring for swivel joint union
DN Typ Type Ø D1 Ø D2 L
25 25S762 26 30,4 5
38 38S762 39 43,5 5
51 51S762 52 56,5 5
63 63S762 65 69,5 5
76 76S762 78 82,5 5
102 102S762 103 108 5
O-Ring für DrehrohrO-ring for swivel joint union
DN Typ Type
EPDM FPM (Viton®)
25 25S763-E 25S763-V
38 38S763-E 38S763-V
51 51S763-E 51S763-V
63 63S763-E 63S763-V
76 65-76SD763-E 65-76SD763-V
102 102S763-E 102S763-V
Ohne Bild / without picture
90
LIAG® Sichtgläser werden zur visuellen Kontrolle des Produktes oder des in der Produktleitung befindlichen Molches eingesetzt. Das in dieser Inline-Ausfüh-rung eingesetzte Borosilikatglas ist spannungsfrei in dem Gehäuse montiert und schockfest gesichert.
LIAG® inline sight glasses are designed for visual inspection of media inside pipes and/or inspection of pigs in prod-uct recovery systems. The Borosilicate glass inside the housing is fixed without any tension and resists hard pressure and vibration shocks.
Merkmale• Hygienisches Design / CIP-fähig• Kein Druckverlust• Molchbar mit LIAG® DMV Lippenmolch• Spannungsfreier Einbau, schockfest
Features• Hygienic design / CIP capability• No pressure loss• Designed to be passed with LIAG® DMV lip pig• Free of tension / shock resistant
91
NennweitenSMS DN25 - DN102
WerkstoffeAlle Edelstahlteile: AISI 316L (1.4404)Glaszylinder: Borosilikat (Duran®, Pyrex®) Dichtungen: Silikon
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturBetriebstemperatur: 110°C (230°F)Kurzzeitig: 140°C (284°F)
DruckBetriebsdruck: 10 bar max. (145 psi max.)
VentilanschlussartenSchweißende: SMS
Nominal sizesSMS DN25 - DN102
MaterialsAll stainless steel parts: AISI316L (1.4404)Glass pipe: Borosilicate (Duran®, Pyrex®)Seals: Silicone
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
TemperatureOperating temperature: 110°C (230°F)Short-term: 140°C (284°F)
PressureOperating pressure: 10 bar max. (145 psi max.)
Valve connectionWelded ends: SMS
92
Sichtglas lang, 2x Schweißende SMSSight glass long, 2x welded ends SMS
DN Typ Type Ø D1 Ø D2 L
25 25S66 22,5 25 112
38 38S66 35,5 38 142
51 51S66 48,5 51 166
63 63S66 60,5 63,5 212
76 76S66 72 76 222
Sichtglas kurz, 2x Schweißende SMSSight glass short, 2x welded ends SMS
DN Typ Type Ø D1 Ø D2 L
25 25S65 22,5 25 82
38 38S65 35,5 38 102
51 51S65 48,5 51 112
63 63S65 60,5 63,5 132
76 76S65 72 76 152
102 102S65 97,6 101,6 202
www.laeufer-ag.de 93
Rohrglas kurzGlass pipe short
DN Typ Type Ø D1 Ø D2 L
25 25S651 22 28 76
38 38S651 35,6 42 96
51 51S651 51 58 106
63 63S651 61,5 70 126
76 76S651 72 85 146
102 102S651 96 110 196
Dichtung für SichtglasGasket for sight glass
DN Typ Type Ø D1 Ø D2 L
25 25S652 22,5 36 8
38 38S652 35 56 8
51 51S652 49 66 8
63 63S652 61 81 8
76 76S652 73 94 8
102 102S652
Rohrglas langGlass pipe long
DN Typ Type Ø D1 Ø D2 L
25 25S661 22 28 106
38 38S661 35,6 42 136
51 51S661 51 58 160
63 63S661 61,5 70 206
76 76S661 75 85 216
94
LIAG® Teleskoprohre dienen zur Kom-pensation axialer Längenausdehnungen. Die Teleskoprohre sind CIP-fähig und mit LIAG® DMV Lippenmolchen molchbar.
LIAG® telescope pipes are designed to compensate axial expansions. The telescope pipes are of hygienic design (CIP) and easily to pass with LIAG® DMV lip pigs.
Merkmale• Hygienisches Design / CIP-fähig• Kein Druckverlust• Molchbar mit LIAG® DMV Lippenmolch
Features• Hygienic design / CIP capability• No pressure loss• Designed to be passed with LIAG® DMV lip pig
95
NennweitenDIN DN80 / SMS DN25 - DN102DIN DN25 - DN65 und DN 100 auf Anfrage
WerkstoffeAlle Edelstahlteile: AISI 316L (1.4404)O-Ring Dichtungen: EPDM, FPM (Viton®)Führungsring: POM (Polyoxymethylen),
PTFE a.A.Gleitring: POM (Polyoxymethylen),
PTFE a.A.
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturBetriebstemperatur: 110°C (230°F)Kurzzeitig: 140°C (284°F)
DruckBetriebsdruck: 10 bar max. (145 psi max.)
VentilanschlussartenSchweißende: DIN, SMS optional mit Gewinde: DIN 11851, SMS 1145
Nominal sizesDIN DN80 / SMS DN25 - DN102DIN DN25 - DN65 and DN 100 upon request
MaterialsAll stainless steel parts: AISI 316L (1.4404)O-ring gasket: EPDM, FPM (Viton®)Steering ring: POM (Polyoxymethylene) PTFE upon requestSlide ring: POM (Polyoxymethylene) PTFE upon request
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
TemperatureOperating temperature: 110°C (230°F)Short-term: 140°C (284°F)
PressureOperating pressure: 10 bar max. (145 psi max.)
Valve connectionWelded ends: DIN, SMS Optional with male ends: DIN 11851, SMS 1145
96
Teleskoprohr, 2x Schweißende DIN 11850Telescope pipe, 2x welded ends DIN 11850
DN Typ Type Ø D1 Ø D2 Lmin Lmax
25 25D74 a.A. upon request
40 40D74 a.A. upon request
50 50D74 a.A. upon request
65 65D74 a.A. upon request
80 80D74 81 85 135 200
100 100D74 a.A. upon request
Führungsring für TeleskoprohrSteering ring for telescope pipe
DN Typ Type Ø D1 Ø D2 L
25 a.A. upon request
40 a.A. upon request
50 a.A. upon request
65 a.A. upon request
80 80D761 85 92,5 18
100 a.A. upon request
Gleitring für TeleskoprohrSlip ring for telescope pipe
DN Typ Type Ø D1 Ø D2 L
25 a.A. upon request
40 a.A. upon request
50 a.A. upon request
65 a.A. upon request
80 80D762 85 89 5
100 a.A. upon request
O-Ring für TeleskoprohrO-ring for telescope pipe
DN Typ Type
EPDM FPM (Viton®)
25 a.A. upon request a.A. upon request
40 a.A. upon request a.A. upon request
50 a.A. upon request a.A. upon request
65 a.A. upon request a.A. upon request
80 80D763-E 80D763-V
100 a.A. upon request a.A. upon request
Ohne Bild / without picture
www.laeufer-ag.de 97
7
Teleskoprohr, 2x Schweißende SMSTelescope pipe, 2x welded ends SMS
DN Typ Type Ø D1 Ø D2 Lmin Lmax
25 25S74 22,5 25 137 205
38 38S74 35,5 38 160 245
51 51S74 48,5 51 160 245
63 63S74 60,5 63,5 160 245
76 76S74 72 76 160 245
102 102S74 97,6 101,6 163 248
Führungsring für TeleskoprohrSteering ring for telescope pipe
DN Typ Type Ø D1 Ø D2 L
25 25S761 25 32,5 18
38 38S761 38 46,5 18
51 51S761 51 59,5 18
63 63S761 63,5 72,5 18
76 76S761 76 85,5 18
102 102S761 101,6 113,5 23
Gleitring für TeleskoprohrSlip ring for telescope pipe
DN Typ Type Ø D1 Ø D2 L
25 25S762 26 30,4 5
38 38S762 39 43,5 5
51 51S762 52 56,5 5
63 63S762 65 69,5 5
76 76S762 78 82,5 5
102 102S762 103 108 5
TELESKOPROHRETELESCOPE PIPES
O-Ring für TeleskoprohrO-ring for telescope pipe
DN Typ Type
EPDM FPM (Viton®)
25 25S763-E 25S763-V
38 38S763-E 38S763-V
51 51S763-E 51S763-V
63 63S763-E 63S763-V
76 65-76SD763-E 65-76SD763-V
102 102S763-E 102S763-V
Ohne Bild / without picture
DIN SMS
99
8.1 ScheibenventileButterfly Valves
8.2 KugelventileBall Valves
100
LIAG® Scheibenventile haben sich seit Jahren in den unterschiedlichsten In-dustriezweigen als robustes, funktionssi-cheres Absperrorgan bewährt. Eigen-ständige DIN, SMS- und Zoll-Baureihen gewähren stets glatten Durchgang. Das umfangreiche Antriebs- und Zube-hörprogramm bietet ein komplettes Paket zur aufgabenspezifischen Bedie-nung und Automatisierung von Absperr-oder Regulierfunktionen.
For years, LIAG® butterfly valves have been known as robust and safe shutters in the most diverse branches of industry. Autonomous series in DIN,SMS and inches always ensure a smooth passage. The extensive program of actuators and accessories offers a complete package for the specific operation and automa-tion of shut-off or control functions.
Merkmale• Glatter, strömungsgünstiger Durchgang• Hygienisches Design / CIP-fähig • Hohe Druckschlagfestigkeit• Zuverlässig und wartungsarm• Universell einsetzbar• Vielzahl unterschiedlicher Ausführungen
Features• Smooth passage with minimum flow resistance• Hygienic design / CIP capability• High impact resistance• Reliable and little maintenance• Universal use• Variety of different models
101
NennweitenDIN DN25 - DN 100 / SMS DN25 - DN102 / Zoll 1" - 4"
WerkstoffeAlle Edelstahlteile: AISI304 (1.4301) oder AISI316L (1.4404)Dichtungen: EPDM, Silikon andere Qualitäten auf Anfrage
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturBetriebstemperatur: 130°C (266°F)Kurzzeitig: 140°C (284°F)
DruckBetriebsdruck: 10 bar max. (145psi max.)
VentilanschlussartenSchweißende: DIN, SMS, ZollGewinde: DIN 11851, SMS 1145Kegel/Mutter-Gewinde: DIN 11851, SMS 1145Clamp: Tri-Clamp
Optionen• Stellungsanzeige für manuelle- und automatisch
betriebene Scheibenventile• Steuerkopfsystem (TOP) für pneumatischen Antrieb• Pneumatikantrieb mit Stellungsregler• Kombination verschiedener Anschlussarten
Nominal sizesDIN DN25 - DN 100 / SMS DN25 - DN102 / Inch 1" - 4"
MaterialsAll stainless steel parts: AISI304 (1.4301) or AISI316L (1.4404)Seals: EPDM, Silicone other grades upon request
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
TemperatureOperating temperature: 130°C (266°F)Short-term: 140°C (284°F)
PressureOperating pressure: 10 bar max. (145psi max.)
Valve connectionWelded ends: DIN, SMS, InchMale ends: DIN 11851, SMS 1145Liner/nut-male end: DIN 11851, SMS 1145Clamp: Tri-Clamp
Options• Valve position feedback switches for manual or auto-
matic operated butterfly valves• Control head (TOP) for pneumatic actuator• Pneumatic actuator with positioner• Combination of different types of connection
102
Scheibenventil, manuell, 2x Schweißende DIN 11850Butterfly valve, manual, 2x welded ends DIN 11850
DN Typ Type Ø A Ø B D E
25 25D04302 29 26 81 40
40 40D04302 41 38 86 50
50 50D04302 53 50 92 50
65 65D04302 70 66 101 50
80 80D04302 85 81 114 60
100 100D04302 104 100 124 64
DN Typ Type Ø A Ø B D E
25 25D04300 52 26 81 64
40 40D04300 65 38 86 72
50 50D04300 78 50 92 72
65 65D04300 95 66 101 76
80 80D04300 110 81 114 100
100 100D04300 130 100 124 104
Scheibenventil, manuell, 2x Gewinde DIN 11851Butterfly valve, manual, 2x male ends DIN 11851
DN Typ Type Ø A Ø B D E
25 25D04301 52 26 81 74
40 40D04301 65 38 86 87
50 50D04301 78 50 92 89
65 65D04301 95 66 101 95
80 80D04301 110 81 114 117
100 100D04301 130 100 124 128
Scheibenventil, manuell, 1x Kegel/Mutter - 1x Gewinde DIN 11851Butterfly valve, manual, 1x liner/nut - 1x male end DIN11851
www.laeufer-ag.de 103
DN Typ Type Ø C D
25 25D04302A 89 248
40 40D04302A 89 252
50 50D04302A 89 256
65 65D04302A 89 262
80 80D04302A 104 268
100 100D04302A 104 275
Scheibenventil, pneumatisch (L/L - L/F), 2x Schweißende DIN 11850Butterfly valve, pneumatic (air/air - air/spring),2x welded ends DIN 11850
DN Typ Type Ø C D
25 25D04300A 89 248
40 40D04300A 89 252
50 50D04300A 89 256
65 65D04300A 89 262
80 80D04300A 104 268
100 100D04300A 104 275
Scheibenventil, pneumatisch (L/L - L/F), 2x Gewinde DIN 11851Butterfly valve, pneumatic (air/air - air/spring), 2x male ends DIN 11851
DN Typ Type Ø C D
25 25D04301A 89 248
40 40D04301A 89 252
50 50D04301A 89 256
65 65D04301A 89 262
80 80D04301A 104 268
100 100D04301A 104 275
Scheibenventil, pneumatisch (L/L - L/F), 1x Kegel/Mutter - 1x Gewinde DIN 11851Butterfly valve, pneumatic (air/air - air/spring), 1x liner/nut - 1x male end DIN 11851
104
Scheibenventil, manuell, 2x Gewinde SMS 1145Butterfly valve, manual, 2x male ends SMS 1145
DN Typ Type Ø A Ø B D E
25 25S34320 40 22,5 89 64
38 38S34320 60 35,5 94 72
51 51S34320 70 48,5 100 72
63 63S34320 85 60,5 109 76
76 76S34320 98 72 116 90
102 102S34320 132 97,6 127 104
DN Typ Type Ø A Ø B D E
25 25S34321 40 22,5 89 80
38 38S34321 60 35,5 94 90
51 51S34321 70 48,5 100 90
63 63S34321 85 60,5 109 92
76 76S34321 98 72 116 105
102 112S34321 132 97,6 127 116
Scheibenventil, manuell, 1x Kegel/Mutter - 1x Gewinde SMS 1145Butterfly valve, manual, 1x liner/nut- 1x male end SMS 1145
DN Typ Type Ø C D
25 25S34320A 76 225
38 38S34320A 76 230
51 51S34320A 76 237
63 63S34320A 101,6 255
76 76S34320A 101,6 263
102 102S34320A 101,6 273
Scheibenventil, pneumatisch (L/L - L/F), 2x Gewinde SMS 1145Butterfly valve, pneumatic (air/air - air/spring), 2x male ends SMS 1145
DN Typ Type Ø C D
25 25S34321A 76 225
38 38S34321A 76 230
51 51S34321A 76 237
63 63S34321A 101,6 255
76 76S34321A 101,6 263
102 112S34321A 101,6 273
Scheibenventil, pneumatisch (L/L - L/F), 1x Kegel/Mutter - 1x Gewinde SMS 1145Butterfly valve, pneumatic (air/air - air/spring), 1x liner/nut -1x male end SMS 1145
www.laeufer-ag.de 105
Scheibenventil, manuell, 2x SchweißendeButterfly valve, manual, 2x welded ends
DN Typ Type Ø A Ø B D E
1" 25C34302 25,4 22,1 89 40
1½" 38C34302 38,1 34,8 94 50
2" 51C34302 50,8 48,5 100 50
2½" 63C34302 63,5 60,2 109 50
3" 76C34302 76,1 72,9 116 60
4" 102C34302 101,6 97,4 127 64
Scheibenventil, manuell, 2x TC-ClampButterfly valve, manual, 2x TC-clamp
DN Typ Type Ø A Ø B D E
1" 25C34330 50,5 22,1 89 64
1½" 38C34330 50,5 34,8 94 72
2" 51C34330 64 47,5 100 72
2½" 63C34330 77,5 60,2 109 76
3" 76C34330 91 72,9 116 78
4" 102C34330 119 97,4 127 92
DN Typ Type Ø C D
1" 25C34302A 76 225
1½" 38C34302A 76 230
2" 51C34302A 76 237
2½" 63C34302A 101,6 255
3" 76C34302A 101,6 263
4" 102C34302A 101,6 273
Scheibenventil, pneumatisch (L/L - L/F), 2x SchweißendeButterfly valve, pneumatic (air/air - air/spring), 2x welded ends
DN Typ Type Ø C D
1" 25C34330A 76 225
1½" 38C34330A 76 230
2" 51C34330A 76 237
2½" 63C34330A 101,6 255
3" 76C34330A 101,6 263
4" 102C34330A 101,6 273
Scheibenventil, pneumatisch (L/L - L/F), 2x TC-ClampButterfly valve, pneumatic (air/air - air/spring), 2x TC-clamp
106
Standard Handhebel, 0°-90°Standard handle, 0°-90°
DN Typ Type A B
25 25 1" 25-65SD04341 115 9,5
40 38 1½" 25-65SD04341 145 9,5
50 51 2" 25-65SD04341 145 9,5
65 63 2½" 25-65SD04341 145 9,5
80 76 3" 76-80SD04341 151 9,5
100 102 4" 100-102SD04341 151 9,5
Standard Handhebel mit Rückmeldehalter M12, 0°-90°Standard handle with feedback bracket M12, 0°-90°
DN Typ Type A B
25 25 1" 25-102D04342 115 9,5
40 38 1½" 25-102D04342 145 9,5
50 51 2" 25-102D04342 145 9,5
65 63 2½" 25-102D04342 145 9,5
80 76 3" 25-102D04342 151 9,5
100 102 4" 25-102D04342 151 9,5
Dichtung für Scheibenventil, DINSeal for butterfly valve, DIN
DN Typ Type A B Ø D
EPDM Silikonsilicone
25 25D04350-E 25D04350-S 20 26 40
40 40D04350-E 40D04350-S 21 38 54
50 50D04350-E 50D04350-S 21 50 66
65 65D04350-E 65D04350-S 22 66 84
80 80D04350-E 80D04350-S 24 81 100
100 100D04350-E 100D04350-S 26,5 100 115
Dichtung für Scheibenventil, SMS/ZollSeal for butterfly valve, SMS/Inch
DN Typ Type A Ø B Ø D
EPDM Silikonsilicone
1" 25C34350-E 25C34350-S 20 22,7 40
1½" 38C34350-E 38C34350-S 20 35,7 54
2" 51C34350-E 51C34350-S 21 48,7 66
2½" 63C34350-E 63C34350-S 22 60,7 84
3" 76C34350-E 76C34350-S 24 72 91
4" 102C34350-E 102C34350-S 26 97,8 115
www.laeufer-ag.de 107
DN Typ Type
25 25 1" 25-102M55BSt
40 38 1½" 25-102M55BSt
50 51 2" 25-102M55BSt
65 63 2½" 25-102M55BSt
80 76 3" 25-102M55BSt
100 102 4" 25-102M55BSt
Induktiver Näherungsschalter M12 aus Metall, 24V DC Inductive proximity switch M12, metal, 24V DC
DN Typ Type
25 25 1" 25-102M55ExSt
40 38 1½" 25-102M55ExSt
50 51 2" 25-102M55ExSt
65 63 2½" 25-102M55ExSt
80 76 3" 25-102M55ExSt
100 102 4" 25-102M55ExSt
Induktiver Näherungsschalter M12 aus Metall, 8,2V DC, Ex Inductive proximity switch M12, metal, 8,2V DC, Ex
DN Typ Type
25 25 1" 25-102M55B
40 38 1½" 25-102M55B
50 51 2" 25-102M55B
65 63 2½" 25-102M55B
80 76 3" 25-102M55B
100 102 4" 25-102M55B
Induktiver Näherungsschalter M12 aus Kunststoff, 24V DCInductive proximity switch M12, plastic, 24V DC
DN Typ Type
25 25 1" 25-102M55C
40 38 1½" 25-102M55C
50 51 2" 25-102M55C
65 63 2½" 25-102M55C
80 76 3" 25-102M55C
100 102 4" 25-102M55C
Induktiver Näherungsschalter M12 aus Kunststoff, 20-250V ACInductive proximity switch M12, plastic, 20-250V AC
108
LIAG® Kugelventile in Lebensmittelaus-führung werden als druckverlustfreies Absperrorgan in den unterschied-lichsten Bereichen eingesetzt. Aufgrund der rohrebenen Konstruktion eignet sich diese Baureihe besonders in SMV-Anlagen (Kap. 6.2) zum Molchen unkomplizierter Medien. Optional sind die Ventile auch totraumminiert und mit Spülanschlüssen lieferbar
LIAG® sanitary ball valves are used in various processes as universal shut-off valve without pressure loss.The valves are optimally suited for the LIAG® SMV pigging system (Chapt. 6.2) of insensitive media. As an option, sanitary ball valves are available with minimized dead pockets and cleaning ports.
Merkmale• Kein Druckverlust• Molchbar• Druckschlagfest• Optional totraumminimiert
Features• No pressure loss• Designed to be passed with pigs (scrapable)• High impact resistance• As an option with minimized dead pockets
109
NennweitenDIN DN25 - DN 100 / Zoll 1" - 4"
WerkstoffeAlle Edelstahlteile: AISI304 (1.4301) oder AISI316L (1.4404)
OberflächenProduktberührend: Ra 0,8 µm (Ra 32µin)
TemperaturBetriebstemperatur: 130°C (266°F)Kurzzeitig: 140°C (284°F)
DruckBetriebsdruck: 10 bar max. (145psi max.)
VentilanschlussartenSchweißende: DIN, ZollGewinde: DIN 11851Kegel/Mutter-Gewinde: DIN 11851Clamp: Tri-Clamp
Optionen• Stellungsanzeige für manuelle- und automatisch
betriebene Kugelventile• Steuerkopfsystem (TOP) für pneumatischen Antrieb• Pneumatikantrieb mit Stellungsregler• Kombination verschiedener Anschlussarten• Totraumminierte Ausführung (Teflonauskleidung) /
Spülanschlüsse
Nominal sizesDIN DN25 - DN 100 / Inch 1" - 4"
MaterialsAll stainless steel parts: AISI304 (1.4301) or AISI316L (1.4404)
SurfacesIn contact with product: Ra 0,8 µm (Ra 32µin)
TemperatureOperating temperature: 130°C (266°F)Short-term: 140°C (284°F)
PressureOperating pressure: 10 bar max. (145psi max.)
Valve connectionWelded ends: DIN, InchMale ends: DIN 11851Liner/nut-male end: DIN 11851Clamp: Tri-Clamp
Options• Valve position feedback switches for manual or
automatic operated ball valves• Control head (TOP) for pneumatic actuator• Pneumatic actuator with positioner• Combination of different types of connection• Dead pocket minimized version (Teflon lining) /
Flushing ports
110
Kugelventil, manuell, 2x Schweißende DIN 11850Ball valve, manual, 2x welded ends DIN 11850
DN Typ Type Ø A Ø B C D E Ø F
25 822 025 26 60 73 120 90 29
40 822 040 38 80 94 120 98 41
50 822 050 50 102,5 121 153 125 54
65 822 065 66 126 147 190 156 70
80 822 080 81 150 162 248 195 85
100 822 100 99 172 185 248 204 104
Ausführung mit Spülanschluss auf AnfrageVersion with cleaning ports upon request
Kugelventil, manuell, 2x Gewinde DIN 11851Ball valve, manual, 2x male ends DIN 11851
DN Typ Type Ø A Ø B C D E Ø F
25 855 025 26 60 83 120 90 52
40 855 040 38 80 105 120 98 65
50 855 050 50 102,5 121 153 125 78
65 855 065 66 126 147 190 156 95
80 855 080 81 150 162 248 195 110
100 855 100 99 172 185 248 204 130
Ausführung mit Spülanschluss auf AnfrageVersion with cleaning ports upon request
DN Typ Type A B Ø C
25 822P 025 73 256 29
40 822P 040 94 263 41
50 822P 050 121 279 53
65 822P 065 147 296 70
80 822P 080 162 370 85
100 822P 100 185 384 104
DN Typ Type A B Ø C
25 855P 025 83 256 52
40 855P 040 105 263 65
50 855P 050 121 279 78
65 855P 065 147 296 95
80 855P 080 162 370 110
100 855P 100 185 384 130
Kugelventil, pneumatisch (L/L - L/F), 2x Schweißende DIN 11850Ball valve, pneumatic (air/air - air/spring), 2x welded ends DIN 11850
Kugelventil, pneumatisch (L/L - L/F), 2x Gewinde DIN 11851Ball valve, pneumatic (air/air - air/spring), 2x male ends DIN 11851
www.laeufer-ag.de 111
8
Zoll / Inch
Kugelventil, manuell, 2x Schweißende Ball valve, manual, 2x welded ends
DN Typ Type Ø A Ø B C D E Ø F
1" 822Z 025 22,1 60 73 120 90 25,4
1½" 822Z 040 34,8 75 94 120 98 38,1
2" 822Z 050 47,5 102,5 121 153 126 50,8
2½" 822Z 065 57 111 125 153 176 63,5
3" 822Z 080 72,1 150 162 248 195 76,1
4" 822Z 100 97,6 172 185 248 204 101,6
Kugelventil, manuell, 2x TC-Clamp Ball valve, manual, 2x TC-clamp
DN Typ Type Ø A Ø B C D E Ø F
1" 844 025 22,1 60 71 120 90 50,4
1½" 844 040 34,8 75 90 120 98 50,4
2" 844 050 47,5 102,5 104 153 126 64
2½" 844 065 57 111 124 153 176 77,4
3" 844 080 72,1 150 143 248 195 90,9
4" 844 100 97,6 172 179 248 204 118,8
DN Typ Type A B Ø C
1" 822ZP 025 73 256 25,4
1½" 822ZP 040 94 263 38,1
2" 822ZP 050 121 279 50,8
2½" 822ZP 065 125 279 63,5
3" 822ZP 080 162 370 76,1
4" 822ZP 100 185 384 101,6
Kugelventil, pneumatisch (L/L - L/F), 2x TC-Clamp Ball valve, pneumatic (air/air - air/spring), 2x TC-clamp
DN Typ Type A B Ø C
1" 844P 025 71 256 25,4
1½" 844P 040 90 263 38,1
2" 844P 050 104 279 50,8
2½" 844P 065 124 279 63,5
3" 844P 080 143 370 76,1
4" 844P 100 179 384 101,6
KUGELVENTILEBALL VALVES
Kugelventil, pneumatisch (L/L - L/F), 2x Schweißende Ball valve, pneumatic (air/air - air/spring), 2x welded ends
113
114
Werkstoffe
Alle Edelstahlteile:AISI 304 (1.4301) oder AISI 316L (1.4404)Dichtungen:EPDM, FPM (Viton®)
Oberflächen
Produktberührend: Ra 0,8 µm (Ra 32 µin)
Temperatur
EPDM Dichtungen
* Betriebstemperatur: -40°C (-40°F) bis +110°C (+230°F)* Kurzzeitig: +140°C (+284°F)
Viton® Dichtungen
* Betriebstemperatur: -20°C (-4°F) bis +160°C (+320°F)* Kurzzeitig: +180°C (+356°F)
Materials
All stainless steel parts: AISI 304 (1.4301) or AISI 316L (1.4404)Seals: EPDM, FPM (Viton®)
Surfaces
In contact with product: Ra 0,8 µm (Ra 32 µin)
Temperature
EPDM seals
* Operating temperature: -40°C (-40°F) to +110°C (+230°F)* Short-term: +140°C (+284°F)
Viton® seals
* Operating temperature: -20°C (-4°F) to +160°C (+320°F) * Short-term: +180°C (+356°F)
115www.laeufer-ag.de 115
DN Typ Type A B Ø C Ø D E
25 25D01002 21 3 36 63 Rd52x1/6"
40 40D01002 21 3 49 78 Rd65x1/6"
50 50D01002 22 3 62 92 Rd78x1/6"
65 65D01002 25 4 80 112 Rd95x1/6"
80 80D01002 30 4 94 127 Rd110x1/4"
100 100D01002 31 5 115 148 Rd130x1/4"
Nutmutter, DIN 11851-FNut, DIN 11851-F
DN Typ Type A Ø B D
25 25D01015 44 63 Rd52x1/6"
40 40D01015 52 78 Rd65x1/6"
50 50D01015 56 92 Rd78x1/6"
65 65D01015 64 112 Rd95x1/6"
80 80D01015 74 127 Rd110x1/4"
100 100D01015 88 148 Rd130x1/4"
Anschweißverschraubung, DIN 11851-SWelding union, DIN 11851-S
DN Typ Type A Ø B Ø C D E
25 25D01020 29 26 29 Rd52x1/6 7
40 40D01020 33 38 41 Rd65x1/6" 7
50 50D01020 35 50 53 Rd78x1/6" 7
65 65D01020 40 66 70 Rd95x1/6" 8
80 80D01020 45 81 85 Rd110x1/4" 8
100 100D01020 54 100 104 Rd130x1/4" 10
Gewindestutzen, DIN 11851-SC Male part, DIN 11851-SC
DN Typ Type A Ø B Ø C Ø D
25 25D01021 22 26 29 44
40 40D01021 26 38 41 56
50 50D01021 28 50 53 68,5
65 65D01021 32 66 70 86
80 80D01021 37 81 85 100
100 100D01021 44 100 104 120
Kegelstutzen, DIN 11851-SDWelding liner, DIN 11851-SD
116
DN Typ Type A Ø B Ø C D E
25 25D01022 22 26 29 Rd52x1/6" 7
40 40D01022 22 38 41 Rd65x1/6" 7
50 50D01022 23 50 53 Rd78x1/6" 7
65 65D01022 25 66 70 Rd95x1/6" 8
80 80D01022 25 81 85 Rd110x1/4" 8
100 100D01022 30 100 104 Rd130x1/4" 10
DN Typ Type A Ø B Ø C Ø D E
25/1" 25D31028 22 22,9 25,4 44 10
40/1½" 40D31028 26 35,1 38,1 56 10
50/2" 50D31028 28 47,8 50,8 68 11
65/2½" 65D31028 32 60,5 63,5 86 12
80/3" 80D31028 37 73,1 76,2 100 12
100/4" 100D31028 44 97,6 101,6 121 15
DIN Kegelstutzen für Zoll RohreDIN welding liner for inch pipes
SONSTIGE ARMATUREN UND FITTINGE ADDITIONAL PARTS AND FITTINGS
Gewindestutzen kurz, DIN 11851-SKCMale part short, DIN 11851-SKC
DN Typ Type A Ø B Ø C Ø D E
25 25D31028 15 26 29 44 10
40 40D31028 15 38 41 56 10
50 50D31028 16 50 53 68 11
65 65D31028 17 66 70 86 12
80 80D31028 17 81 85 100 12
100 100D31028 20 100 104 121 15
Kegelstutzen kurz, DIN 11851-SKD Welding liner short, DIN 11851-SKD
DN Typ Type A Ø B Ø C D E
25/1" 25D01027 29 22,9 25,4 Rd52x1/6" 7
40/1½" 40D01027 33 35,1 38,1 Rd65x1/6" 7
50/2" 50D01027 35 47,8 50,8 Rd78x1/6" 7
65/2½" 65D01027 40 60,5 63,5 Rd95x1/6" 8
80/3" 80D01027 45 73,1 76,2 Rd110x1/4" 8
100/4" 100D01027 54 97,6 101,6 Rd130x1/4" 10
DIN Gewindestutzen für Zoll RohreDIN male part for inch pipes
DIN
www.laeufer-ag.de 117
DN Typ Type A Ø B Ø C
EPDM FPM (Viton®)
25 25D01003-E 25D01003-V 5 30 40
40 40D01003-E 40D01003-V 5 42 52
50 50D01003-E 50D01003-V 5 54 64
65 65D01003-E 65D01003-V 5 71 81
80 80D01003-E 80D01003-V 5 85 95
100 100D01003-E 100D01003-V 6 104 114
Dichtring, DIN 11851-GSeal ring, DIN 11851-G
DN Typ Type A Ø B Ø C Ø D
40 40D01030 50 78 38 41
50 50D01030 54 92 50 53
65 65D01030 62 112 66 70
80 80D01030 72 127 81 85
100 100D01030 86 148 100 104
Aseptik-Anschweißverschraubung kurze Baulänge, Form A, DIN 11864-1Aseptic welding union short version, form A, DIN 11864-1
118
DN Typ Type A B Ø D E
25 25D01100 21 3 63 Rd52x1/6"
40 40D01100 21 3 78 Rd65x1/6"
50 50D01100 22 3 92 Rd78x1/6"
65 65D01100 25 4 112 Rd95x1/6"
80 80D01100 30 4 127 Rd110x1/4"
100 100D01100 31 5 148 Rd130x1/4"
DN Typ Type Ø A Ø B C
25 25D01103 41 11 115
40 40D01103 50 11 140
50 50D01103 63 11 150
65 65D01103 80 11 160
80 80D01103 95 11 220
100 100D01103 115 11 230
Haltekette für Blindmutter Chain for blind nut
SONSTIGE ARMATUREN UND FITTINGE ADDITIONAL PARTS AND FITTINGS
DIN
BlindmutterBlind nut
DN Typ Type A B Ø C Ø D E
25 25D01101 21 3 10 63 Rd52x1/6"
40 40D01101 21 3 10 78 Rd65x1/6"
50 50D01101 22 3 10 92 Rd78x1/6"
65 65D01101 25 4 10 112 Rd95x1/6"
80 80D01101 30 4 10 127 Rd110x1/4"
100 100D01101 31 5 10 148 Rd130x1/4"
Blindmutter mit Knopf Blind nut with boss
DN Typ Type A Ø B
EPDM FPM (Viton®)
25 25D01102-E 25D01102-V 3 52
40 40D01102-E 40D01102-V 3 65
50 50D01102-E 50D01102-V 3 78
65 65D01102-E 65D01102-V 3 95
80 80D01102-E 80D01102-V 3 110
100 100D01102-E 100D01102-V 3 130
Dichtscheibe für BlindmutterSeal disc for blind nut
www.laeufer-ag.de 119
9
SONSTIGE ARMATUREN UND FITTINGE ADDITIONAL PARTS AND FITTINGS
DN Typ Type A Ø B Ø C Ø D
25 25D01062 21,5 50,5 26 29
40 40D01062 21,5 50,5 38 41
50 50D01062 21,5 64 50 53
65 65D01062 28 91 66 70
80 80D01062 28 106 81 85
100 100D01062 28 119 100 104
DN Typ Type Ø A B
25 25-38C41065 53 84,5
40 25-38C41065 53 84,5
50 51C41065 67 98,5
65 76C41065 94 125,5
80 80D41065 109 142
100 102C41065 122 153,5
Clamp KlammerClamp
Anschweißclampstutzen, DIN 32676 Butt welding ferrule, DIN 32676
DN Typ Type Ø A Ø B
EPDM FPM (Viton®) FPM / PTFE
25 25D41003-E 25D41003-V 25D41003-P 50,5 26,2
40 40D41003-E 40D41003-V 40D41003-P 50,5 38,2
50 50D41003-E 50D41003-V 50D41003-P 64 50,2
65 65D41003-E 65D41003-V 65D41003-P 91 66,2
80 80D41003-E 80D41003-V 80D41003-P 106 81,2
100 100D41003-E 100D41003-V 100D41003-P 119 100,2
Clamp Dichtung, DIN 32676 Gasket, DIN 32676
DN Typ Type A Ø C
25 25D41064 7 50,5
40 40D41064 7 50,5
50 50D41064 7 64
65 65D41064 7 91
80 80D41064 7 106
100 100D41064 9 119
Clamp BlindstutzenSolid end cap
DIN
120
DN Typ Type A Ø B C Ø D E
25 25D02003 50 26 50 29 1,5
40 40D02003 60 38 60 41 1,5
50 50D02003 70 50 70 53 1,5
Rohrbogen 90°, 2x Schweißende, DIN 11852, Reihe 2Welding bend 90°, 2x welded ends, DIN 11852, line 2
DN Typ Type A Ø B C Ø D E
25 25D02000 50 25 50 28 1,5
40 40D02000 60 37 60 40 1,5
50 50D02000 70 49 70 52 1,5
65 65D02000 80 66 80 70 2
80 80D02000 90 81 90 85 2
100 100D02000 100 100 100 104 2
Rohrbogen 90°, 2x Schweißende, ähnlich DIN 11852Welding bend 90°, 2x welded ends, similar to DIN 11852
DN Typ Type Ø B C Ø D E
25 25D02103 26 50 29 1,5
40 40D02103 38 60 41 1,5
50 50D02103 50 70 53 1,5
Rohrbogen 45°, 2x Schweißende, DIN 11852, Reihe 2Welding bend 45°, 2x welded ends, DIN 11852, line 2
DN Typ Type Ø B C Ø D E
25 25D02100 25 50 28 1,5
40 40D02100 37 60 40 1,5
50 50D02100 49 70 52 1,5
65 65D02100 66 80 70 2
80 80D02100 81 90 85 2
100 100D02100 100 100 104 2
Rohrbogen 45°, 2x Schweißende, ähnlich DIN 11852Welding bend 45°, 2x welded ends, similar to DIN 11852
www.laeufer-ag.de 121
DN Typ Type A Ø B Ø D E
25 25D02609 50 29 26 1,5
40 40D02609 60 41 38 1,5
50 50D02609 70 53 50 1,5
T-Stück, 3x Schweißende, DIN 11852, Reihe 2T-piece, 3x welded ends, DIN 11852, line 2
DN Typ Type A Ø B Ø D E
25 25D02600 50 28 25 1,5
40 40D02600 60 40 37 1,5
50 50D02600 70 52 49 1,5
65 65D02600 80 70 66 2
80 80D02600 90 85 81 2
100 100D02600 100 104 100 2
T-Stück, 3x Schweißende, ähnlich DIN 11852 T-piece, 3x welded ends, simillar to DIN 11852
DN Typ Type A Ø B C Ø D E
25 25D02603 50 29 16,5 26 1,5
40 40D02603 60 41 22,5 38 1,5
50 50D02603 70 53 29,5 50 1,5
T-Stück 3x Schweißende, kurz, DIN 11852, Reihe 2T-piece, 3x welded ends, short, DIN 11852, line 2
DN Typ Type A Ø B C Ø D E
25 25D02610 50 28 15,5 25 1,5
40 40D02610 60 40 21,5 37 1,5
50 50D02610 70 52 28 49 1,5
65 65D02610 80 70 40 66 2
80 80D02610 90 85 47,5 81 2
100 100D02610 100 104 58 100 2
T-Stück 3x Schweißende, kurz, ähnlich DIN 11852T-piece, 3x welded ends, short, similar to DIN 11852
122
DN Typ Type A Ø B Ø D
25 25D05360 37 31 26
40 40D05360 41 43 38
50 50D05360 43 55 50
65 65D05360 48 72 66
80 80D05360 58 87 81
100 100D05360 63 106 100
DN Typ Type Ø A Ø B C
25/20 25/20D01230 26 20 11
40/25 40/25D01230 38 26 22
50/40 50/40D01230 50 38 22
65/50 65/50D01230 66 50 29
80/65 80/65D01230 81 66 27
100/65 100/65D01230 100 66 61
100/80 100/80D01230 100 81 52,5
DN Typ Type Ø A D
25 25D05366 45 10
40 40D05366 55 10
50 50D05366 65 10
65 65D05366 85 10
80 80D05366 100 15
100 100D05366 118 15
Ersatzglas für SchauglasReplacement for inspection glass
Reduzierstück konzentrisch, 2x SchweißendeConcentric reducer, 2x welded ends
SchauglasInspection glass
DN Typ Type Ø A Ø B C
40/25 40/25D01240 38 26 33
50/25 50/25D01240 50 26 66
50/40 50/40D01240 50 38 33
65/40 65/40D01240 66 38 77
65/50 65/50D01240 66 50 44
80/50 80/50D01240 81 50 85
80/65 80/65D01240 81 66 41,2
100/65 100/65D01240 100 66 93
100/80 100/80D01240 100 81 52,5
Reduzierstück exzentrisch, 2x Schweißende Excentric reducer, 2x welded ends
www.laeufer-ag.de 123
DN Typ Type A Ø C Ø E
25 25D01303 58 26 32
40 40D01303 79 38 48
50 50D01303 92 50 58
65 65D01303 108 66 76
80 80D01303 123 81 90
100 100D01303 136 100 110
DN Typ Type A Ø C D Ø E
25 25D01300 87 26 Rd52x1/6" 32
40 40D01300 112 38 Rd65x1/6" 48
50 50D01300 127 50 Rd78x1/6" 58
65 65D01300 148 66 Rd95x1/6" 76
80 80D01300 168 81 Rd110x1/4" 90
100 100D01300 190 100 Rd130x1/4" 110
DN Typ Type A B Ø C Ø D Ø E
25 25D01323 75 22 26 28 31
40 40D01323 100 22 38 40 43
50 50D01323 115 40 50 52 56
65 65D01323 140 40 66 70 74
80 80D01323 190 50 81 85 89
100 100D01323 210 50 100 104 109
Schlauchtülle RohrausführungHose nozzle, pipe design
Schlauch-Gewindestutzen, DIN 11854Hose male part, DIN 11854
SchlauchtülleHose nozzle
DN Typ Type A Ø C Ø D Ø E
25 25D01301 80 26 44 32
40 40D01301 105 38 56 48
50 50D01301 120 50 68 58
65 65D01301 140 66 86 76
80 80D01301 160 81 100 90
100 100D01301 180 100 120 110
Schlauch-Kegelstutzen, DIN 11854 Hose liner, DIN 11854
124
DN Typ Type A B Ø C Ø D E
25 25S31029 20 4 32 51 Rd40x1/6"
38 38S31029 25 4 48 74 Rd60x1/6"
51 51S31029 26 5 60,5 84 Rd70x1/6"
63 51S31029 30 5 74 100 Rd85x1/6"
76 76S31029 32 6 87 114 Rd98x1/6"
102 102S31029 45 7 112 154 Rd132x1/6"
DN Typ Type A Ø B Ø C Ø D
25 25S31028 8 22,5 25 35,5
38 38S31028 9 35,5 38 55
51 51S31028 9 48,5 51 65
63 63S31028 9 60,5 63,5 80
76 76S31028 10 72 76 93
102 102S31028 12 97,6 101,6 127
DN Typ Type A Ø B D
25 25S31015 24 51 Rd40x1/6"
38 38S31015 30 74 Rd60x1/6"
51 51S31015 30 84 Rd70x1/6"
63 63S31015 34 100 Rd85x1/6"
76 76S31015 35 114 Rd98x1/6"
102 102S31015 48 154 Rd132x1/6"
Nutmutter, SMS 1145Nut, SMS 1145
Anschweißverschraubung, SMS 1145Welding union, SMS 1145
Kegelstutzen, SMS 1145Welding liner, SMS 1145
DN Typ Type A Ø B Ø C D
25 25S31027 15 22,5 25 Rd40x1/6"
38 38S31027 20 35,5 38 Rd60x1/6"
51 51S31027 20 48,5 51 Rd70x1/6"
63 63S31027 24 60,5 63,5 Rd85x1/6"
76 76S31027 24 72 76 Rd98x1/6"
102 102S31027 35 97,6 101,6 Rd132x1/6"
Gewindestutzen, SMS 1145Male part, SMS 1145
www.laeufer-ag.de 125
DN Typ Type A B Ø C Ø D E
25 25S31101 20 4 10 51 Rd40x1/6"
38 38S31101 25 4 10 74 Rd60x1/6"
51 51S31101 26 5 10 84 Rd70x1/6"
63 63S31101 30 5 10 100 Rd85x1/6"
76 76S31101 32 6 10 114 Rd98x1/6"
102 102S31101 45 7 10 154 Rd132x1/6"
DN Typ Type A Ø B Ø C
EPDM FPM (Viton®)
25 25S31004-E 25S31004-V 5,5 25 32
38 38S31004-E 38S31004-V 5,5 38 48
51 51S31004-E 51S31004-V 5,5 51 61
63 63S31004-E 63S31004-V 5,5 63,5 73,5
76 76S31004-E 76S31004-V 5,5 76 86
102 102S31004-E 102S31004-V 5,5 101,6 113,5
DN Typ Type Ø A Ø B C
25 25D01103 41 11 115
38 40D01103 50 11 140
51 50D01103 63 11 150
63 65D01103 80 11 160
76 80D01103 95 11 220
102 100D01103 115 11 230
Haltekette für BlindmutterChain for blind nut
Dichtring, SMS 1145Seal ring, SMS 1145
Blindmutter mit KnopfBlind nut with boss
DN Typ Type A B Ø D E
25 25S31100 20 4 51 Rd40x1/6"
38 38S31100 25 4 74 Rd60x1/6"
51 51S31100 26 5 84 Rd70x1/6"
63 63S31100 30 5 100 Rd85x1/6"
76 76S31100 32 6 114 Rd98x1/6"
102 102S31100 45 7 154 Rd132x1/6"
BlindmutterBlind nut
126
DN Typ Type Ø A Ø B
1" 25-38C41065 53 84,5
1½" 25-38C41065 53 84,5
2" 51C41065 67 98,5
2½" 63C41065 80 111,9
3" 76C41065 94 125,5
4" 102C41065 122 153,5
DN Typ Type Ø A Ø B
EPDM FPM (Viton®) FPM / PTFE
1" 25C41003-E 25C41003-V 25C41003-P 50,5 22,2
1½" 38C41003-E 38C41003-V 38C41003-P 50,5 34,9
2" 51C41003-E 51C41003-V 51C41003-P 64 47,6
2½" 63C41003-E 63C41003-V 63C41003-P 77,5 60,3
3" 76C41003-E 76C41003-V 80D41003-P 91 73
4" 102C41003-E 102C41003-V 102C41003-P 119 97,6
DN Typ Type A Ø C
1" 25C41064 7 50,5
1½" 38C41064 7 50,5
2" 51C41064 7 64
2½" 63C41064 7 77,5
3" 76C41064 7 91
4" 102C41064 9 119
DN Typ Type A Ø B Ø C Ø D
1" 25C41061 21,5 50,5 22,2 25,65
1½" 38C41061 21,5 50,5 34,9 38,35
2" 51C41061 21,5 64 47,6 51,05
2½" 63C41061 21,5 77,5 60,3 63,75
3" 76C41061 21,5 91 73 76,45
4" 102C41061 21,5 119 97,6 101,85
Clamp KlammerClamp
AnschweißclampstutzenButt welding ferrule
Clamp BlindstutzenSolid end cap
Clamp DichtungGasket
www.laeufer-ag.de 127
DN Typ Type Ø B C Ø D E
1" 25S02100 22,9 27,5 25,4 1,25
1½" 38S02100 35,1 45 38,1 1,5
2" 51S02100 47,8 67,5 50,8 1,5
2½" 63S02100 60,5 82,5 63,5 1,5
3" 76S02100 72,1 95 76,2 2,05
4" 102S02100 97,6 133,5 101,6 2
DN Typ Type A Ø B C Ø D E
1" 25S02005 38 22,9 38 25,4 1,25
1½" 38S02005 57 35,1 57 38,1 1,5
2" 51S02005 76 47,8 76 50,8 1,5
2½" 63S02005 95 60,5 95 63,5 1,5
3" 76S02005 114 72,1 114 76,2 2,05
4" 102S02005 152 97,6 152 101,6 2
DN Typ Type A Ø B Ø C Ø D E
25/1" 25D31028 22 22,9 25,4 44 10
40/1½" 40D31028 26 35,1 38,1 56 10
50/2" 50D31028 28 47,8 50,8 68 11
65/2½" 65D31028 32 60,5 63,5 86 12
80/3" 80D31028 37 73,1 76,2 100 12
100/4" 100D31028 44 97,6 101,6 121 15
DN Typ Type A Ø B Ø C D E
25/1" 25D01027 29 22,9 25,4 Rd52x1/6" 7
40/1½" 40D01027 33 35,1 38,1 Rd65x1/6" 7
50/2" 50D01027 35 47,8 50,8 Rd78x1/6" 7
65/2½" 65D01027 40 60,5 63,5 Rd95x1/6" 8
80/3" 80D01027 45 73,1 76,2 Rd110x1/4" 8
100/4" 100D01027 54 97,6 101,6 Rd130x1/4" 10
Rohrbogen 45°, 2x SchweißendeWelding bend 45°, 2x welded ends
Gewindestutzen für Zoll RohreMale part for inch pipes
Rohrbogen 90°, 2x Schweißende Welding bend 90°, 2x welded ends
Kegelstutzen für Zoll RohreWelding liner for inch pipes
128
DN Typ Type Ø A Ø B C
1½" – 1" 38/25S01251 35,1 22,9 24
2" – 1" 51/25S01251 47,8 22,9 47,5
2" – 1½" 51/38S01251 47,8 35,1 24
2½" – 1½" 63/38S01251 60,5 35,1 46,5
2½" – 2" 63/51S01251 60,5 47,8 23
3" – 2" 76/51S01251 72,1 47,8 44,5
3" – 2½" 76/63S01251 72,1 60,5 22
4" – 3" 102/76S01251 97,6 72,1 48
DN Typ Type Ø A Ø B C
1½" – 1" 38/25S01250 35,1 22,9 21
2" – 1" 51/25S01250 47,8 22,9 38
2" – 1½" 51/38S01250 47,8 35,1 20
2½" – 1½" 63/38S01250 60,5 33,7 39,5
2½" – 2" 63/51S01250 60,5 47,8 19,5
3" – 2" 76/51S01250 72,1 47,8 37,5
3" – 2½" 76/63S01250 72,1 60,5 19
4" – 3" 102/76S01250 97,6 72,1 35,5
DN Typ Type A Ø B Ø D C E
1" 25S02607 50 25,4 22,9 14 1,25
1½" 38S02607 60 38,1 35,1 20 1,5
2" 51S02607 70 50,8 47,8 27,5 1,5
2½" 63S02607 80 63,5 60,2 36 1,65
3" 80S02607 90 76,1 72,8 44 1,65
4" 102S02607 100 101,6 97,4 56 2,1
DN Typ Type A Ø B Ø D E
1" 25S02605 50 25,4 22,9 1,25
1½" 38S02605 60 38,1 35,1 1,5
2" 51S02605 70 50,8 47,8 1,5
2½" 63S02605 80 63,5 60,2 1,65
3" 80S02605 90 76,1 72,8 1,65
4" 102S02605 100 101,6 97,4 2,1
Reduzierstück exzentrisch, 2x SchweißendeExcentric reducer, 2x welded ends
T-Stück, 3x SchweißendeT-piece, 3x welded ends
Reduzierstück konzentrisch, 2x SchweißendeConcentric reducer, 2x welded ends
T-Stück, 3x Schweißende, kurzT-piece, 3x welded ends, short
www.laeufer-ag.de 129
9
DN Typ Type
25 25 1" 25-40GH6090-B
40 38 1½" 25-40GH6090-B
50 51 2" 50-102GH90155-B
65 63 2½" 50-102GH90155-B
80 76 3" 50-102GH90155-B
100 102 4" 50-102GH90155-B
DN Typ Type A Ø B Ø C Ø D
10 10I01062 21,5 25,4 14 17,2
15 15I01062 21,5 50,5 18,1 21,3
20 20I01062 21,5 50,5 22,9 26,9
25 25I01062 21,5 50,5 29,7 33,7
32 32I01062 21,5 64 38,4 42,4
40 40I01062 21,5 64 44,3 48,3
50 50I01062 21,5 77,5 56,3 60,3
65 65I01062 21,5 91 72,1 76,1
80 80I01062 21,5 106 84,9 88,9
100 100I01062 28 130 110,3 114,3
125 125I01062 28 155 135,7 139,7
150 150I01062 28 183 163,1 168,3
200 200I01062 28 233,5 213,9 219,1
SONSTIGE ARMATUREN UND FITTINGE ADDITIONAL PARTS AND FITTINGS
ISO
AnschweißclampstutzenButt welding ferrule
GelenkhakenschlüsselAdjustable hook wrench
Sonstiges
130
Keine Haftung für Druckfehler. Änderungen vorbehalten.