Post on 26-Feb-2021
transcript
Kunststoffprofile
Die nachfolgenden Kunststoffprofile vereinfachen die Verkleidung von Kanten. Sie ersparenVor- und Nacharbeit und entschärfen die Blechkanten. Ferner wird eine Zierwirkung erreicht.
Die Kunststoffprofile können je nach Anforderungsprofil des Kunden als Mono- oder Coex-trudate in verschiedenen Qualitäten wie PP, PE, TPE und ABS hergestellt werden.DieSpezifikationen der verwendeten Materialien entsprechen den automobilen Regelwerken.Die dazugehörigen Materialdatenblätter senden wir Ihnen gerne zu.
Die Standardfarbe ist schwarz. Auf Anfrage sind alle gängigen Farben möglich.
Thermoplastic Profiles
The following thermoplastic profiles simplify the revetting of metal edges, they savepreparatory or reconditioning work. Furthermore, their decorative effect is often desired.
The thermoplastic profiles can be mono- or co-extruded in various material qualitiessuch as PP, PE, TPE and ABS according to the customer's application profile.The standard colour is black. All common colours are available upon request.
The materials comply with the common standards of the automobile industry. We will bepleased to provide you with the corresponding material data sheets.
Issue / Stand 03/05 C1
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C2
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
26.01. F. Schollen
M 1:1
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP)
Thermoplastic Elastomer (TPE)
black / 97±5 ShoreA60±5 ShoreA
TPE PP
schwarzblack / schwarz
19,5±0,7
1,3
6,5±
0,5
10,5±0,6
1
1,5
G2 121-SP
Klemmprofil 2 HärtenJ-Retainer Dual Hardness
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C3
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a + 3b
26.01. F. Schollen
M 1:1
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore D
This profile can be used with G2 136Verbaubar mit G2 136
black / schwarz
11±0.8
7±0.
7
24±1
(3,4
)
1,8+0,4/-0
G2 135-SP
KlemmprofilJ-Retainer
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C4
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
26.01. F. Schollen
M 1:1
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore D
This profile can be used with G2 135Verbaubar mit G2 135
black / schwarz
15±1
5±0,3
3,5+
0/-0
,3
1,4±
0,2
G2 136-SP
KlemmprofilRetainer
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C5
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
10:1, 1:1 DIN 16941 3a+3b
26.01. F. Schollen
M 1:1
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polyethylene (PE) natural / 45±5 Shore Dnatur
3,5±
0,2
15±0,7
2±0,
2
6,3±
0,5
(1,8)
G2 139-SP
Kanal-KlemmprofilFixation Profile
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C6
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
26.01. F. Schollen
M 1:1
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore Dblack / schwarz
6,5±
0,5
10,5±0,5
1,3
19,3±1
G2 158-SP
KlemmprofilJ-Retainer
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C7
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
26.01. F. Schollen
M 1:1
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore Dblack / schwarz
17+0/-0.8
7±0,
5
7,3+0.5/-0
11
(1)
1,6±
0,3
G2 169-SP
RetainerKlemmprofil
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C8
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
26.01. F. Schollen
M 1:1
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylen (PP) 60±5 Shore Dblack / schwarz
19
9-0,7
7
1,5
32
(2,5)
G2 171-SP
KlemmprofilJ-Retainer
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C9
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore Dblack / schwarz
15±0,6
1±0,
3
G2 173-SP
FlachprofilFlat Profile
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C10
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore Dblack / schwarz
81±0,
3
+0,5-0,4
G2 175-SP
FlachprofilFlat Profile
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C11
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
27.01. F. Schollen
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore Dblack / schwarz
G2 176-SP
Flat ProfileFlachprofil
gez. vondrawn by
checked bygepr.von
M 1:1
14±0.2
0,9±
0.1
7±0,2(2,5)
1
1,9±
0,4
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C12
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
26.01. F. Schollen
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) black / schwarz 60±5 ShoreD
G2 188-SP
FlachprofilFlat Profile
gez. vondrawn by
checked bygepr.von
M 1:120
±1
1,3±0,3
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C13
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore D
This profile can be used with G2 195Verbaubar mit G2 195
black / schwarz
16,5±0.8
7±0.7
3,2±
0.2
1,3±
0.2
G2 189-SP
FlachprofilFlat Profile
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C14
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore D
This profile can be used with G2 195Verbaubar mit G2 195
black / schwarz
3,2±
0.3
7±0.5
16,5±0.6
Ø3,2±0.3
1,3±
0.3
G2 192-SP
FlachprofilFlat Profile
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C15
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
26.01. F. Schollen
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) black / 60±5 ShoreDschwarz
G2 193-SP
KlemmprofilJ-Retainer
gez. vondrawn by
checked bygepr.von
M 1:1
20±0,53,8
±0,4
(3,7
)
8,8±
0,4
1,5±
0,3
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C16
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 Shore D
Verbaubar mit G2 189This profile can be used with G2 189
black / schwarz
25±1
9±0,
7
13,4±0,8
2±0,4
1,6±
0,4
(3,7
)
G2 195-SP
KlemmprofilJ-Retainer
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C17
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
60±5 ShoreD60±5 ShoreA
Polypropylene (PP)Polypropylene (PP)
black / schwarzblack / schwarz
19,3
10.3
6,5
1,3
PP
PP
G2 203-SP
Klemmprofil 2 HärtenJ-Retainer Dual Hardness
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C18
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 ShoreDblack / schwarz
2,4±
0,3
20±0,8
3,5±
0,5
2±0,
3
G2 215-SP
FormprofilForm Profile
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C19
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 ShoreDblack / schwarz
20±0.5
9,4±
0.5
3,8±0.4
3,7±
0.5
G2 238-SP
KlemmprofilRetainer
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C20
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylen (PP) 60±5 ShoreDblack / schwarz
18±0.7
9,6±0.5
8,1±
0.7
3,5±
0.5
1,5±
0.2
G2 239-SP
KlemmprofilRetainer
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C21
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
26.01. F. Schollen
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylen (PP) 60±5 ShoreDblack / schwarz
G2 240-SP
KlemmprofilJ-Retainer
gez. vondrawn by
checked bygepr.von
M 1:1
2,5±0,3
6,7±0.5
8°2,7
10,5±0,5
19,3±1
6,5±
0,5
(11)
1,3
2
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C22
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
10:1, 1:1 DIN 16941 2a+2b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 ShoreDblack / schwarz
This profile can be used with G2 246Verbaubar mit G2 246
4,1
2,8
0,6
(9,4)
11,4±0,5
G2 245-SP
T-Clip ProfilT-Clip Profile
gez. vondrawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C23
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
10:1, 1:1 DIN 16941 2a+2b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 ShoreDblack / schwarz
This profile can be used with G2 245Verbaubar mit G2 245
4,4
2,8
1,2
12,2±0,5
4,1
0,6
G2 246-SP
U-Clip ProfilU-Clip Profilegez. von
drawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C23
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
10:1, 1:1 DIN 16941 2a+2b
27.01. F. Schollen
M 1:1
Sinke27.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) 60±5 ShoreDblack / schwarz
This profile can be used with G2 245Verbaubar mit G2 245
4,4
2,8
1,2
12,2±0,5
4,1
0,6
G2 246-SP
U-Clip ProfilU-Clip Profilegez. von
drawn by
checked bygepr.von
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C24
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 2a+2b
26.01. F. Schollen
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP)
Thermoplastic Elastomer (TPE)97±5 ShoreA50±5 ShoreA
black / schwarz
black / schwarz
G2 250-SP
Klemmprofil 2 HärtenJ-Retainer Dual Hardness
gez. vondrawn by
checked bygepr.von
M 1:1
TPE
PP
1-1,
51-
1,5
11,2
20
6,7
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com
Issue / Stand 03-05 C25
nach dem neuesten Stand liegt bei Ihnen.Kopie und wird nicht aktualisiert. Die Verantwortung für die AktualisierungOhne Stempel und Unterschrift ist diese Zeichnung eine nicht kontrollierteupdated. You are responsible for ensuring you have the latest issue.
2. Unless stamped and signed this is an uncontrolled copy and will not be
anzupassen sind.Die Eckenradien sind Minimalwerte, die dem Werkzeug und dem Material
3. Minimum radius on corners to suit tooling and material.
Ankündigung zu ändern.SAND Profile behält sich das Recht vor, diese Zeichnung ohne vorherigenotification.
1. SAND Profile reserves the right to modify this drawing without prior
Bemerkungen:Notes:
a third party. This document and the information contained therein are
nach DIN ISO 16016 beansprucht).Information sind vertraulich und EIgentum der Fa. SAND Profile GmbH (SchutzDritten zugänglich gemacht werden. Dieses Dokument und die darin enthaltenetechnische Unterlage weder kopiert, vervielfältigt noch auf irgendeine WeiseCopyright: Ohne vorherige Genehmigung der Fa. Sand Profile GmbH darf diese
confidential and property of SAND Profile GmbH (protection according to
document must not be copied, duplicated or transmitted in any manner to5. Copyright: Without prior consent of SAND Profile GmbH this technical
Länge: Wie erforderlich. Toleranz: In Abstimmung mit dem Kunden.4. Length: As required. Tolerance to be agreed with customer.
DIN ISO 16016 claimed).
Index
Material
2005
Sheet
5:1, 1:1 DIN 16941 3a+3b
26.01. F. Schollen
Sinke26.01.
/ Werkstoff: / Farbe:Color / Härte:Hardness / MaßstabScale / Freimaßtoleranz:Tolerance
/ DatumDate / NameName Description / Benennung
/ Zeichnungs-Nr.Drawing no.
DatumDate
NameName
Blatt
SAND Profile GmbH - D-63811 Stockstadt - Dr.-Patt-Straße 9-11ModificationÄnderung
NoNr.
Index
Polypropylene (PP) black / 60±5 ShoreDschwarz
G2 258-SP
FlachprofilFlat Profile
gez. vondrawn by
checked bygepr.von
M 1:1
1,3±
0,2
13±0,8
3,2±
0,2
9±0,5
2,2±0,51,6±
0,2
SAND Profile GmbHDr.- Patt- Str. 9- 11D- 63811 Stockstadt
Tel.: +49 (0) 60 27/ 41 60 0Fax: +49 (0) 60 27/ 41 60 69
E-Mail: info@sandprofile.comWeb: www. sandprofile.com