Post on 18-Mar-2022
transcript
788
Kabelsteckverbinder• Schraubverriegelung nach DIN EN 61076-2-111• Schutzart IP67 1)
• Am Kabel angespritzte Ausführungen• Konfektionierbar• Schraubklemmanschluss• Einfache Montage• Winkelsteckverbinder in 4 Positionen einstellbar
Flanschsteckverbinder• Schraubverriegelung nach DIN EN 61076-2-111• Schutzart IP67 1)
• Einfache Montage• Tauchlötanschluss/Litzen• Verschiedene Bauformen
Cable Connectors• Screw locking according to DIN EN 61076-2-111• Degree of protection IP67 1) • Moulded versions• Cable assembly possible• Screw clamp connection• Easy assembly• Angled connector adjustable in 4 positions
Panel Mount Connectors• Screw locking according to DIN EN 61076-2-111• Degree of protection IP67 1) • Easy assembly• Dip solder termination/single wires• Various variants
M12 Automatisierungstechnik T-/L-KodierungM12 Automation Technology T-/L-Coding
813
1) Erläuterung der Schutzarten siehe technische Informationen./ 1) Explanation of protection standards see technical information.
789
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Kabelstecker mit T-Kodierung, zur Spannungsversorgung, PowerMale cable connector with T-coding, for power supply, Power
Winkelstecker mit T-Kodierung, PowerMale angled connector with T-coding, Power
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4 8–10 mm 99 0629 19 04
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4 8–10 mm 99 0629 58 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 8–10 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing
M12 x
1
Ø 20
,2
~63
SW 18mm Ø 20
SW 19mm
Kabe
l Ø 8–
10Ca
ble Ø
8–10
~44
M12 x 1
Kabel Ø 8–10Cable Ø 8–10
45° Verdrehen des Kontakteinsatzes zum Winkelgang im 90° Raster möglich.It is possible to turn and fix the contact carrier in 4 different 90° positions.
Ø 20,2
SW 18mm
SW 19mm
790
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Kabelstecker mit T-Kodierung, zur Spannungsversorgung, Power, Irisfeder, schirmbarMale cable connector with T-coding, for power supply, Power, screw clamp connection, iris type spring, shieldable
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4
5–8 mm 99 1631 814 04
8–9 mm 99 1631 812 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 5–8 mm, 8–9 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing
M12 x
1
~70
Ø 20
SW 18mm SW 16mm SW 13mm
791
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-L
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
Kabelstecker mit L-Kodierung, Schraubklemmanschluss, PowerMale cable connector with L-coding, screw clamp termination, Power
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4+FE 8–13 mm 99 0639 29 05
M12 x
1Ø
25
SW 22mm
76
Ø 25
SW 23mm
SW 23mm SW 20mm
Polzahl 4+FE Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) mit Aderendhülse/with ferrule, max. 2,5 mm2 (max. AWG 44) ohne Aderendhülse/without ferrule Wire gaugeKabeldurchlass 8–13 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 630 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe ll Material groupBemessungsstrom (40°C) 12 A, 16 A Rated current (40 °C)Durchgangswiderstand ≤ 5 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing
792
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Kabeldose mit T-Kodierung, PowerFemale cable connector with T-coding, Power
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4 8–10 mm 99 0630 19 04
M12 x
1Ø
20,2
~58
Ø 20
Kabe
l Ø 8–
10Ca
ble Ø
8–10
SW 18mm SW 19mm
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 8–10 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing
Winkeldose mit T-Kodierung, PowerFemale angled connector with T-coding, Power
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4 8–10 mm 99 0630 58 04
~39
M12 x 1
Kabel Ø 8–10Cable Ø 8–10
45° Verdrehen des Kontakteinsatzes zum Winkelgang im 90° Raster möglich.It is possible to turn and fix the contact carrier in 4 different 90° positions.
Ø 20,2
SW 18mm
SW 19mm
1
2
34
793
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) Wire gaugeKabeldurchlass 5–8 mm, 8–9 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing
Kabeldose mit T-Kodierung, Power, Irisfeder, schirmbarFemale cable connector with T-coding, Power, screw clamp connection, iris type spring, shieldable
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4
5–8 mm 99 1632 814 04
8–9 mm 99 1632 812 04
~65
M12 x
1Ø
20
SW 18mm SW 16mm SW 13mm
794
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-L
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
Polzahl 4+FE Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm/screw clamp TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16) mit Aderendhülse/with ferrule, max. 2,5 mm2 (max. AWG 44) ohne Aderendhülse/without ferrule Wire gaugeKabeldurchlass 8–13 mm Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 630 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe ll Material groupBemessungsstrom (40°C) 12 A, 16 A Rated current (40 °C)Durchgangswiderstand ≤ 5 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing
Kabeldose mit L-Kodierung, Schraubklemmanschluss, PowerFemale cable connector with L-coding, screw clamp termination, Power
PolzahlContacts
KabeldurchlassCable outlet
Bestell-Nr.Ordering-No.
4+FE 8–13 mm 99 0640 29 05
M12 x
1Ø
25
Ø 25
SW 22mm
70
SW 23mm
SW 23mm SW 20mm
795
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
MontageanleitungAssembly instruction
Abisoliermaße Kabelsteckverbinder, Schraubklemmanschluss, nicht schirmbarStrip measures cable connectors, screw clamp connection, not shieldable
Abisoliermaße Winkelsteckverbinder, Schraubklemmanschluss, nicht schirmbarStrip measures angled connectors, screw clamp connection, not shieldable
20 abmanteln
dismantle
abisolieren
strip5
20abmanteln
dismantle
abisolieren
strip5
Abisoliermaße Kabelsteckverbinder, Irisfeder, schirmbarStrip measures cable connectors, iris type spring, shieldable
Schirmdurchmesser ≤5,5 mmshielding braid diameter ≤5,5 mm
Schirmdurchmesser >5,5 mmshielding braid diameter >5,5 mm
33
5
12
21 abmanteln
dismantle
abisolieren
strip5
Schirm kürzen
shorten shield
12 Schirm auf Kabelmantel umschlagen und mit Kupfer-Tape umwickelnwrap shielding braid with copper tape and revert to cable jacket
Festdrehen mit ≥ 100 cNmscrew down with a torque ≥ 100 cNm
abmanteln
dismantle
abisolieren
strip
Schirm kürzen
shorten shield
796
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T/-L
MontageanleitungAssembly instruction
Abisoliermaße Kabelsteckverbinder mit L-Kodierung, Schraubklemmanschluss, PowerStrip measures cable connectors with L-coding, screw clamp termination, Power
EinzelteildarstellungComponent part drawing
Kabelsteckverbinder mit L-Kodierung, Schraubklemmanschluss, PowerStrip measures cable connectors with L-coding, screw clamp termination, Power
KennlinieRating
Steckereinsatzmale insert
Buchseneinsatzfemale insert
Kupplungshülsesleeve
Druckschraubepressing screw
Dichtungseal
Dichtungseal
Strombelastbarkeitskurve nach DIN EN 60512 für POWER-Kabelsteckverbinder
Derating curve according to DIN EN 60512 for POWER cable connectors
Belastungsstrom I (A)Load current I (A)
Bauteil-Umgebungstemperatur TU (°C)Ambient temperature of part TU (°C)
191817161514131211109876543210
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95
obere Grenz-temperaturhigh limit temperature
T-Kodierung 4-poligT-coding 4 pole version
Alternativ-DichtringAlternative sealing ring
30 abmanteln
dismantle
abisolieren
strip8
Vormontierter DichtringPre-mounted sealing ring
1. Klemmschrauben herausdrehen, bis Bohrungen für Litzen völlig frei sind.2. Optional: Bei Kabeldurchmesser über 12 mm den vor- montierten Dichtring gegen beigelegten Alternativ-Dichtring tauschen.3. Kupplungshülse mit Kabelklemmung auf Kabel schieben.4. Kabel abmanteln.5. Adern abisolieren und Litzen verdrillen.6. Litzen anschrauben.7. Kupplungshülse aufschrauben.8. Druckschraube andrehen.
1. Clamp out screws until bores for single wires are completely free.2. Optional: Change the the pre-mounted sealing ring against the alternative sealing ring when cable diameter is bigger than 12 mm. 3. Push sleeve on cable with cable clamp.
4. Cut off cable coating,5. Strip single cores and twist single wires.6. Screw single wires.7. Screw on sleeve.8. Turn on pressing screw.
797
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Kabelstecker mit T-Kodierung, zur Spannungsversorgung, umspritzt, PURMale cable connector with T-coding, for power supply, moulded, PUR
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
KabelmantelCable jacket
KabellängeCable length
Bestell-Nr.Ordering-No.
4
PUR 2 m 77 0629 0000 50704-0200
PUR 5 m 77 0629 0000 50704-0500
Kabeldose mit T-Kodierung, zur Spannungsversorgung, umspritzt, PURFemale cable connector with T-coding, for power supply, moulded, PUR
PolzahlContacts
KabelmantelCable jacket
KabellängeCable length
Bestell-Nr.Ordering-No.
4
PUR 2 m 77 0630 0000 50704-0200
PUR 5 m 77 0630 0000 50704-0500
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart crimpen, am Kabel angespritzt/crimp, moulded TerminationAnschlussquerschnitt 1,5 mm2 (AWG 16) Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 630 V Rated voltageBemessungs-Stoßspannung 6000 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt Stift/pin CuZn (Messing/brass), Buchse/socket CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PUR Material of contact bodyMaterial Gehäuse PUR Material of housing
48,531
L
Ø 14
,5M1
2 x 1
SW 13mm
Ø 14
,5
4431
L
Ø 14
,5M1
2 x 1
SW 13mm
Ø 14
,5
798
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
1) Vergleichbare AWG Leiter siehe technische Informationen./ 1) Comparable AWG conductors see technical information.
Technische Daten Standard KabelSpecifications Standard cable
Polzahl 4 Number of contactsQuerschnitt mm2 1) 4 x 1,5 mm2 (AWG 16) Wire gauge mm2 1)
Material Mantel PUR schwarz/black Material jacketIsolation Litze TPM Insulation wireLitzenaufbau (mm) 82 x 0,15 Design of wire (mm)Kabelmantel (mm) 8 Cable jacket (mm)Leiterwiderstand 57 Ω/Km (20 °C) Resistance of wireTemperaturbereich (Kabel bewegt) PUR: – 20 °C /+ 80 °C Temperature range (cable in move)Temperaturbereich (Kabel fest) PUR: – 50 °C /+ 80 °C Temperature range (cable not in move)Biegeradius (Kabel bewegt) min. 10 x D Bending radius (cable in move)Biegeradius (Kabel fest) min. 7,5 x D Bending radius (cable not in move)Biegezyklen (bei 10 x D) 5 Mio. Bending cycles (at 10 x D)Zulässige Beschleunigung 5 m/s2 Permitted accelerationVerfahrweg horizontal 5 m/s2 5 m Traverse path horizontal 5 m/s2
Verfahrweg vertikal 5 m/s2 2 m Traverse path vertical 5 m/s2
Verfahrgeschwindigkeit Bei 5 m horizontalem Weg bis 200 m/min./At 5 m horizontal traverse up to 200 m/min. Traverse speedBemerkung In der Schleppkette oder bei mechanischer Beanspruchung +60 °C./In chain flex application or when stressed machanically +60 °C. RemarkZulassung UL/CSA ApprovalUL-Style PUR: AWM 20234 UL-style
799
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Flanschstecker mit T-Kodierung, Schraubklemmanschluss, MetallgehäuseMale panel mount connector with T-coding, screw clamp connection, metal housing
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M20 x 1,5 99 0633 500 04
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0631 90 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm, tauchlöten/screw clamp, dip solder TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16)/— Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated, CuZn (Messing vernickelt/brass nickel plated) Material of housing
Flanschstecker mit T-Kodierung, von vorn verschraubbar, tauchlöten, MetallgehäuseMale panel mount connector with T-coding, front fastened, dip solder, metal housing
M12 x
1
32
2 7
Ø 20
,2
M20 x
1,5
SW 19mm
Ø 22
,2
SW 18mm SW 22mm SW 17,7mmM1
2 x 1
Ø 21
21
211
SW 13,4mmSW 19mm SW 17mm
M16 x
1,5
Ø 1,2 Ø
18
32,8 5
max. 4,5
29
800
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0631 300 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0631 320 04
Flanschstecker, von vorn verschraubbar, mit Litzen, T-Kodierung, KunststoffgehäuseMale panel mount connector, front fastened, with single wires, T-Coding, plastic housing
Flanschstecker mit Litzen, T-Kodierung, KunststoffgehäuseMale panel mount connector with single wires, T-Coding, plastic housing
M12 x
1
M16 x
1,5
SW 13,4mmSW 17mm
20
213
23,6200
Ø 18
M12 x
1M1
6 x 1,
5
SW 22mm SW 17mm
21211
200
Ø 24
Ø 18
SW 13,4mm
5
23,6
max. 4,5
801
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Flanschstecker mit T-Kodierung, von vorn verschraubbar, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, front fastened, with single wires, metal housing
Flanschstecker mit T-Kodierung, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, with single wires, metal housing
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0631 700 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing
M12 x
1
23,55
2
SW 17mm
1320
200
M16 x
1,5
Ø 18
SW 13,4mm
M12 x
1
Ø 21
M16 x
1,5
Ø 18
21
211
SW 13,4mmSW 19mm SW 17mm
2,8
max. 4,5
23,6200
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0631 120 04
802
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP40 ohne Dichtung/without sealing, IP67 mit Dichtung siehe Zubehör/with sealing see accessories Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse CuZn (Messing vernickelt/brass nickel plated) Material of housing
Flanschstecker mit T-Kodierung, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, with single wires, metal housing
M12 x
1
SW 22mm
2013
Ø 23
M20 x
1,5
3,6
200
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M20 x 1,5 09 0631 642 04
Flanschstecker mit T-Kodierung, PViereckflansch, mit Litzen, MetallgehäuseMale panel mount connector with T-coding, rectangular flange, with single wires, metal housing
PolzahlContacts
Bestell-Nr.Ordering-No.
4 09 0631 070 04
2014
14
Ø 3,2
M12 x
1
Ø 12
20
320015
23,6
803
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Flanschdose mit T-Kodierung, Schraubklemmanschluss, MetallgehäuseFemale panel mount connector with T-coding, screw clamp connection, metal housing
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M20 x 1,5 99 0634 500 04
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0632 90 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart schraubklemm, tauchlöten/screw clamp, dip solder TerminationAnschlussquerschnitt max. 1,5 mm2 (max. AWG 16)/— Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuZn (Messing/brass), CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated, CuZn (Messing vernickelt/brass nickel plated) Material of housing
Flanschdose mit T-Kodierung, von vorn verschraubbar, tauchlöten, MetallgehäuseFemale panel mount connector with T-coding, front fastened, dip solder, metal housing
M12 x
1
26,9
2 7
Ø 20
,2
M20 x
1,5
Ø 22
,2
SW 19mm
SW 18mm SW 22mm SW 17,7mm
Ø 21
M16 x
1,5
Ø 1,2 Ø
18
17,5
7,5
SW 13,4mmSW 19mm SW 17mm
32,8 5
max. 4,5M1
2 x 1
2
25,5
804
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0632 300 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse PA Material of housing
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0632 321 04
Flanschdose, von vorn verschraubbar, mit Litzen, T-Kodierung, KunststoffgehäuseFemale panel mount connector, front fastened, with single wires, T-Coding, plastic housing
Flanschdose mit Litzen, T-Kodierung, KunststoffgehäuseFemale panel mount connector with single wires, T-Coding, plastic housing
M12 x
1
M16 x
1,5
SW 13,4mmSW 17mm
19,5
211,5
23,4200
Ø 18
M12 x
1PG
9
SW 22mm SW 17mm
Ø 24
Ø 18
SW 13,4mm
17,52
2006
23,4
max. 4,5
805
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Flanschdose mit T-Kodierung, von vorn verschraubbar, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, front fastened, with single wires, metal housing
Flanschdose mit T-Kodierung, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, with single wires, metal housing
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0632 700 04
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP67 Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse Zink Druckguss vernickelt/zinc diecasting nickel plated Material of housing
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M16 x 1,5 09 0632 120 04
M12 x
1
23,4
11,5 200
M16 x
1,5
1,5 2
19,5
Ø 18
SW 17mmSW 13,4mm
Ø 21
M16 x
1,5
Ø 18
17,5
2
SW 13,4mmSW 19mm SW 17mm
2,8
max. 4,5
23,4
M12 x
1
200
7,5
806
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
Abbildung / Figure
Maßzeichnung / Drawing
Bestell-Daten / Order Data
Technische Daten / Specifications
Polzahl 4 Number of contactsSteckverbinder Verriegelung schrauben/screw Connector locking systemAnschlussart Litzen (AWG 16)/single wires (AWG 16) TerminationAnschlussquerschnitt — Wire gaugeKabeldurchlass — Cable outletSchutzart IP40 ohne Dichtung/without sealing, IP67 mit Dichtung siehe Zubehör/with sealing see accessories Degree of protectionMechanische Lebensdauer > 100 Steckzyklen/> 100 mating cycles Mechanical operationObere Grenztemperatur + 85 °C Upper temperatureUntere Grenztemperatur – 40 °C Lower temperatureBemessungsspannung 63 V Rated voltageBemessungs-Stoßspannung 1500 V Rated impulse voltageVerschmutzungsgrad 3 Pollution degreeÜberspannungskategorie IIl Overvoltage categorieIsolierstoffgruppe lll Material groupBemessungsstrom (40°C) 12 A Rated current (40 °C)Durchgangswiderstand ≤ 3 mΩ Contact resistanceMaterial Kontakt CuSn (Bronze/bronze) Material of contactKontaktoberfläche Au (Gold/gold) Contact platingMaterial Kontaktkörper PA Material of contact bodyMaterial Gehäuse CuZn (Messing vernickelt/brass nickel plated) Material of housing
Flanschdose mit T-Kodierung, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, with single wires, metal housing
PolzahlContacts
BefestigungsgewindeFixing thread
Bestell-Nr.Ordering-No.
4 M20 x 1,5 09 0632 642 04
M12 x
1
SW 22mm
M20 x
1,5
19,511,5 3,9
200
Ø 23
1,5
Flanschdose mit T-Kodierung, Viereckflansch, mit Litzen, MetallgehäuseFemale panel mount connector with T-coding, rectangular flange, with single wires, metal housing
PolzahlContacts
Bestell-Nr.Ordering-No.
4 09 0632 070 04
2014
14
Ø 3,2
Ø 12
18,5
320013,5
23,4
M12 x
1Ø
13,5
807
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T/-L
MontageanleitungAssembly instruction
Abisoliermaße Fanschsteckverbinder, Schraubklemmanschluss, nicht schirmbarStrip measures panel mount connectors, screw clamp connection, not shieldable
PolbilderContact arrangements
Stifteinsatz (Steckseite)Male insert (mating side)
Buchseneinsatz (Steckseite)Female insert (mating side)
4 pol4 contacts
1234
X2,550,00
–2,550,00
Y0,00
–2,550,002,55
1
23
4
45°
1 braun/brown2 weiß/white3 blau/blaue4 schwarz/black
1234
X–2,550,002,550,00
Y0,00
–2,550,002,55
1
23
4
45°
1 braun/brown2 weiß/white3 blau/blaue4 schwarz/black
LitzenquerschnittWire cross sectionmax. 1,5 mm2 4-polig/contacts
KontakteinsatzContact insert4 x 90° verdrehbar/adjustable
AnzugsdrehmomentTightening torqueSW 19 Mutter/nut = 5 Nm M18 x 0,75M20 x 1,5 = 5 Nm
SW 19mm
20 abmanteln
dismantle
abisolieren
strip5
PG 9M16x1,5
APG 9M16x1,5
B16,217,0
C15,316,1
AB
45°
C
1 x 45°13,5 alternativ/alternativ
Mit DurchgangsbohrungWith bore hole
Mit Gewinde, einschraubbarWith thread to screw in
Anzugsdrehmoment/Tightening torque
Metallgehäuse/Metal housing 6,25 NmKunststoffgehäuse/Plastic housing 3,75 Nm
Mit Fläche als VerdrehschutzWith flats as anti-rotation device
MontageausschnittPanel cut out
FlanschsteckverbinderPanel mount connectors
4+FE pol L-Kodierung4+FE contacts L-Coding
1234FE
X2,801,73
–1,73–2,800,00
Y0,91
–2,38–2,38
0,912,94
4
3 2
1 1 braun/brown2 weiß/white3 blau/blaue4 schwarz/blackFE grau/grey
1234FE
X–2,80–1,731,732,800,00
Y0,91
–2,38–2,38
0,912,94
1
2 3
4 1 braun/brown2 weiß/white3 blau/blaue4 schwarz/blackFE grau/grey
808
Automatisierungstechnik Serie 813Automation Technology 813 Series M12-T
MontageausschnittPanel cut out
Flanschsteckverbinder, von vorn verschraubbarPanel mount connectors, front fastened
Flanschsteckverbinder positionierbarPanel mount connectors positioning possible
Flanschsteckverbinder SchraubklemmanschlussPanel mount connectors screw clamp connection
C
1 x 45°13,5
Mit DurchgangsbohrungWith bore hole
max. 4,5
PG 9M16x1,5
C15,316,1
Anzugsdrehmoment/Tightening torque
Metallgehäuse/Metal housing 6,25 NmKunststoffgehäuse/Plastic housing 1,25 Nm
Mit Fläche als VerdrehschutzWith flats as anti-rotation device
Ø 21
M20 x
1,5
45°
1 x 45°
Ø 20
,1
min. 2max. 3,5
Anzugsdrehmoment/Tightening torque M20 x 1,5 5 Nm
Mit DurchgangsbohrungWith bore hole
Mit Gewinde, einschraubbarWith thread to screw in
M16 x
1,5
Anzugsdrehmoment/Tightening torque
Metallgehäuse/Metal housing 6,25 NmKunststoffgehäuse/Plastic housing 1,25 Nm
Flanschsteckverbinder VierkantflanschPanel mount connectors square flange
Zubehör siehe Seite 593–599./Accessories see page 593–599.
Ø 12,2
14
14 M3 (4
x)
0,5 x 45°
Voraussetzungen für Schutzart IP67:1. Verwendung von Dichtung, Best.-Nr. 16 0959 0002. Gewinde M3 (4x) als Gewindesacklöcher oder Schraubenköpfe abgedichtet
Requirements for Degree of protection IP67:1. Use of sealing, Ordering-No. 16 0959 0002. M3 thread (4x) sealed as a threaded blind holes or screw heads
MA_M12-A_S_T_Vierkant.ai