transcript
Energy Flows and Processes 2021„Energy, flows and processes“
Christoph Müller
||
Reza Abhari, André Bardow, Patrick Jenny, Ilya Karlin, Marco
Mazzotti, Maria Lukatskaya, Christoph Müller, Nicholas Noiray,
David Norris, Dimos Poulikakos, Sotiris Pratsinis, Thomas Rösgen,
Romain Quidant, Giovanni Sansavini, Aldo Steinfeld, Mark
Tibbitt
04.05.2021 2Christoph Müller
Experimentelle Methoden für Ingenieursanwendungen ->
Strömungsmessung
Numerische Mathematik, Turbulent Flows
Verbrennung und chemisch reaktive Prozesse in der Energie- und
Materialtechnik
Mass Transfer
Energy Systems and Power Engineering
Beispiel: Verbrennungskraftwerk
||
Breite Ausbildung
Theoretische und experimentelle Grundlagen zur Lösung von Problemen
in der Energie, Material- und Verfahrenstechnik
Christoph Müller 504.05.2021
Mittelständische Betriebe, Startups (z.B. Climeworks), spin off‘s,
Planungsbüros,…. Bereich Risiko und Sicherheit:
Versicherungen
Befähigung für wen, was? : „Energy, flows and processes“
Christoph Müller 04.05.2021 6
Information an Studierende Ansprechpartner für Studierende
Mobilität: Festlegung Lehrveranstaltungen
Auswahl von 2/4 Kernfächern, 2/9 Wahlfächern und 1 Fach aus dem
allgemeinen MAVT Vorlesungskatalog.
Allgemeine Informationen zum Fokus „Energy, flows and
processes“
Christoph Müller 04.05.2021 7
Experimental Methods for Engineers (151-0123-00L) Prof. Th. Rösgen
et al.
Combustion and Reactive Processes in Energy and Materials
Technology (151-0917-00L) Profs. N. Noiray and S. Pratsinis
6. Semester Berechnungsmethoden der Energie- und
Verfahrenstechnik (151-0208-00L) Prof. P. Jenny und Dr.
Meyer-Massetti
Energy Systems and Power Engineering (151-0206-00L) Profs. R.
Abhari and A. Steinfeld
Christoph Müller 804.05.2021
Mass Transfer (Prof. S. Pratsinis, 151-0917-00L, HS)
Turbulent Flows (Prof. P. Jenny, 151-0109-00L, HS)
Thermodynamics and Transport Phenomena in Nanotechnolgy (Prof.
Schutzius, 151-0060-00L)
Introduction to Quantum Mechanics for Engineers (Prof. D. Norris,
151-0966-00L, FS)
CO2 Capture and Storage and the Industry of Carbon-based resources
(Prof. M. Mazzotti et al.,
151-0928-00L, FS)
Introduction to Modeling and Optimization of Sustainable Energy
Systems (Profs.
Sansavini/Bardow, 151-0221-00L)
||
Spezielle Messmethoden und – algorithmen: LIF, UV-vis, LDV, PIV,
Schlieren
Beispielanwendungen in Laborpraktika
Christoph Müller 04.05.2021 10
nanoparticles); applications in energy conversion systems for
heat/power generation. Flame synthesis of materials: pigments,
fillers and optical fibers. Droplet combustion: flame spray
pyrolysis (FSP).
Combustion and Reactive Processes in Energy and Materials
Processes
- Prof. Boulouchos und Prof. Noiray
Christoph Müller 04.05.2021 11
Introductory lecture course for the specialization in energy,
Sustainable energy system and environmental impact of energy
conversion and use,
The electric power distribution system,
Renewable energy and power,
Hydrogen and fuel cells
Christoph Müller 04.05.2021 12
Numerische Diskretisierungsverfahren: Finite-Differenzen- und
Finite-Volumen- Verfahren, Methode der gewichteten Residuen, Finite
Elemente Methode
Lösung der grundlegenden Gleichungstypen,
Wärmeleitungs/Diffusionsgleichung (parabolisch), Poisson-Gleichung
(elliptisch) Advektionsgleichung/Wellengleichung (hyperbolisch)
Advektions- Diffusions-Gleichung
Christoph Müller 04.05.2021 13
Christoph Müller 04.05.2021 14
Annular Combustor
Durox et al, C&F, 2013 Lab. chamber (40 cm diam)
Acoustic load Vibrations Mechanical failure
Acoustic field
Thermo-acoustic coupling
Flame dynamics
Christoph Müller 1504.05.2021
Computations Fluid Dynamics
Christoph Müller 04.05.2021 16 Experiment: Liu et al, Nature
Physics 10, 515–519 (2014) Simulation: Mazloomi, Chikatamarla,
Karlin, Phys. Rev. Lett. (2015)
Experiment
Colloidal Quantum Dots Plasmonic Films
Applications: Photovoltaics, Thermophotovoltaics, Light-Emitting
Devices, Lasers, Spasers . . .
||
Advanced manufacturing of multicomponent biomaterials
Injectable drug delivery systems
Slide Number 2
Befähigung für wen, was? : „Energy, flows and processes“
Allgemeine Informationen zum Fokus „Energy, flows and
processes“
Kernfächer (2 von 4)
Wahlfächer (2 von 9)
Combustion and Reactive Processes in Energy and Materials Processes
- Prof. Boulouchos und Prof. Noiray
Energy Systems and Power Engineering - Profs. Abhari and
Steinfeld
Berechnungsmethoden der Energie- und Verfahrenstechnik - Prof.
Jenny
Laboratory of Combustion and Acoustics for Power
Laboratory for Renewable Energy Carriers
Computations Fluid Dynamics
Slide Number 17
Macromolecular Engineering Lab
Slide Number 20