Post on 07-May-2021
transcript
1
PARTICLE UNDER CONTROL
TOPAS-GMBH DE
Technologie-orientierte Partikel-, Analysen- und Sensortechnik
CLEAN ROOM VALIDATION EQUIPMENT
AEROSOL AND PARTICLE MEASURING
INSTRUMENTS
AEROSOL GENERATION
AEROSOL ACCESSORIES
FILTER AND FILTER MEDIA
TESTING SYSTEMS
SOFTWARE SOLUTIONS
PRODUCTS PRODUCTS PRODUCTS PRODUCTS
INNOVATIONS INNOVATIONS INNOVATIONS INNOVATIONS
APPLICATIONS
2
Produkte
Produkte sind mehr als nur das Ergebnis einer Fertigung. Sie beinhalten Ideen, Technologie, Know-how, maschinelle und handwerkliche Qualität sowie Design. Die umfangreiche Topas-Produktpalette gliedert sich in Seriengeräte und komplexe Son-deranlagen, wie z.B. Prüfstände.
Products
Topas products are more than just the output of a manufactu-ring process. A well-balanced mixture of advanced technology, design and technical expertise as well as our highly qualified staff ensure the high quality of Topas products. The wide range of Topas products includes both standard devices and complex tailor-made systems such as test stands.
Applications
There is a wide range of interesting applications for Topas pro-ducts in the field of particle technology. Worldwide, these well established products have been used for basic scientific research in the field of aerosol technology and filter development for a long period of time.
Innovations
A key part of Topas‘ success is the new development and conti-nuous improvement of our products through innovations. Imple-menting this philosophy has so far resulted in 31 patents and registered designs.
Innovationen
Die fast ausschließlich eigene Topas-Produkt- und Anlagenent-wicklung wird häufig von bedeutenden Innovationen begleitet, die nicht nur eine elegante Problemlösung darstellen. Mit bisher 31 eigenen Patent- und Gebrauchsmuster-Anmeldungen konnten wir die wichtigsten Ideen schützen.
Applikationen
Mit Topas-Produkten sind im Bereich der Partikeltechnologie viele interessante Applikationen realisierbar. Für die Forschung auf dem Gebiet der Aerosoltechnologie sowie der Entwicklung von Filtern und Abscheidern sind unsere Geräte weltweit im Einsatz.
3
Company
1991 November Firmengründung in Dresden November Company founded in Dresden, Germany
1992 Technologieförderung durch das Bundesministerium für Forschung Federal Ministry of Research awards a grant to support highly innovative enterprises
1993 Designpreis für den Aerosolgenerator der Serie SLG Design Award for the Condensation Aerosol Generator series SLG
1994 Innovationspreis für den Aerosolgenerator der Serie SLG Innovation Award for the Condensation Aerosol Generator series SLG
1995 Erfolgreiche Produkteinführung „Clean Room Equipment“, erster Filterprüfstand zum Test adsorptiver Materialien Successful introduction of products related to clean room / environment validation, first filter test rig for adsorptive filter materials
1997 Firmengebäude auf der Wilischstraße, Filterprüfstände zur Ermittlung des Fraktionsabscheidegrades Movement into new facilities, Filter test rigs for fractional efficiencies of particle filters
1998 Einrichtung einer Glastechnischen Werkstatt Installation of glass blower workshop
1999 Zertifizierung des Unternehmens nach DIN EN ISO 9001 Certification according to DIN EN ISO 9001
2002 Neuentwicklungen: Automatischer Filterprüfstand nach EN 1822-4, Dichtheitsprüfstand, Elektrostatischer Aerosol-Neutralisator, ASHRAE Staubgenerator Development of an Automated Filter Scanning Test System according to EN 1822-4, Test Rig for Leak Test; Electrostatic Aerosol Neutralizer, ASHRAE Dust Disperser
2007 Besondere Anerkennung des Freistaates Sachsen im Rahmen des Wettbewerbs „Innovationspreis des Freistaates Sachsen 2007“ für den optischen Partikelsensor PMP Topas GmbH was awarded an appreciation of the Free State of Saxony within the competition “Innovation Award of Saxony 2007” for the optical process particle sensor PMP
2008 Neues Messgerät zur Ultrafeinstaubmessung im Rahmen des EU LIFE-Projektes Newly developed measuring instrument for ultrafine particulate matter within the EU LIFE-Project
2009 Erweiterung und Umzug in neues Firmengebäude, Weiterentwicklung Filterprüfstand nach EN 779 & ASHRAE 52.2, neues Prinzip Aerosolverdünnung Enlargement and relocation of the headquarters, further development of Filter Test Rig acc. to EN 779 & ASHRAE 52.2, new principle of aerosol dilution
2010 Erfolgreiche Praxiseinführung eines Staubdispergierers für PURAL NF, Geräte zur Schutzgradmessung in OP-Räumen; manueller Filter-Scanner für HEPA/ULPA-Filter Successful introduction of a new dust disperser for PURAL NF, devices for protection grade measurement of operating theatres; Manual Filter Scanning Test System for HEPA/ULPA filters
2011 Neues Blow-By-Messsystem, Komplettierung des Equipments zur Reinraumabnahme mit neuartigem Nebelgenerator und Validierungssoftware New blow-by measuring systems, completion of equipment for clean room validation with novel fog generator and validation software
2013 Filtertestsystem für den Einsatz in der Produktion (Qualitätsprüfung kleiner Filterelemente) Filter test system for use in the production process (quality testing of small-sized filter elements)
2014 Neuentwicklung: Automatischer Flüssigkeitsfilterprüfstand nach ISO 4020 Development of an automated test rig for liquid filters according to ISO 4020
Chronik History
4
Aerosolerzeugung
Aerosolgeneratoren für polydisperse Tröpfchenaerosole
Aerosolgeneratoren für monodisperse Tröpfchenaerosole
Aerosolgeneratoren für Feststoffaerosole (Staubdispergierer)
Aerosol Accessories
Aerosolverdünnungssysteme mit festem Verdünnungsverhältnis
Aerosolverdünnungssysteme mit einstellbarem Verdünnungsverhältnis
Probenahmesysteme für Druckgasleitungen
Probenahme-Umschalteinheit
Aerosolneutralisator
Diffusionstrockner
Partikelmessung
Partikelmessung in Gasen
Partikelmessung in Flüssigkeiten
Partikelmessung in Kunststoffschmelzen
Messung von Blow-By Aerosolen
Clean Room Equipment
Aerosolgenerierung
Aerosolverdünnung und -verteilung
Rechteckige Probenahmesonden
Partikelmessung
Software
Produktübersicht
Filter- und Filtermedienprüfung
Luftfilter
KFZ-Luftfilter
Ölnebelabscheider
Filtermedien
Softwarelösungen
5
Aerosol Generation
Aerosol generators for polydisperse droplet aerosols
Aerosol generators for monodisperse droplet aerosols
Aerosol generators for solid aerosols (dust disperser)18 - 23
Aerosol Accessories
Aerosol dilution systems with fixed dilution ratio
Aerosol dilution systems with adjustable dilution ratio
Sampling unit for pressure gas lines
Sample switching unit
Aerosol neutralizer
Diffusion dryer
24 - 26
Seiten pages
Particle Measurement
Particle measuring in gases
Particle measuring in fluids
Particle measuring in plastic melts
Measurement of blow-by aerosols
16 - 17
Clean Room Equipment
Aerosol generation
Aerosol dilution and distribution
Rectangular shaped sampling probes
Particle measurement
Software
14 - 15
Product Overview
Filter and Filter Media Testing
Particulate Air Filters
Automotive Air Filters
Oil Mist Separators
Filter Media
6 - 12
Software Solutions 27
6
Prüfung von Filterelementen auf - Differenzdruck - Staubspeicherfähigkeit - Fraktionsabscheidegrad
Automatisierte Prüfabläufe mit PC und nutzerfreundlicher Steuersoftware
Anschauliche Datenpräsentation
Filterprüfanlagen
Test of filter elements regarding: - differential pressure characteristics - dust holding capacity - fractional efficiency
Automated testing procedures using PC and user-friendly control software
Clear data presentation
A l l g eme i n
AFS
• Prüfung von Schwebstofffiltern nach EN 1822-4 (Filterscan), EN 1822-5 (integraler Abscheidegrad)
• Optionale Filtermedienprüfung nach EN 1822-3 mit dem AFS 153
• Klassifizierung von HEPA- und ULPA-Filtern
• Für verschiedene Filterabmessungen bis 1220 x 1830 mm
• 3 Ausführungen: - AFS 150 mit Adapterplatten-Filterhalter für kundenspezifische Filterabmessungen - AFS 151 mit Universal-Filterhalter - AFS 152 für manuelle Filterscans
• Tests of filters for suspended matter according to EN 1822-4 (Filter scan), EN 1822--5 (integral filtration efficiency)
• Optional filter media testing according to EN 1822-3 with AFS 153
• Classifying of HEPA and ULPA filters
• For varying filter dimensions up to 1220 x 1830 mm
• 3 model designs: - AFS 150 with cabinet filter holder and adapter plates for user-specific filter dimensions - AFS 151 with universal filter holding system - AFS 152 for manual filter scanning
Gene ra l
L u f t f i l t e r
AFS 150 AFS 152 AFS 153
7
Filter Test Systems
Qualitätsprüfung, Klassifizierung von Filtern
Forschungsaufgaben an Filterelementen
Quality testing and classification of filters
Research projects for filter elements
E i n s a t zgeb i e t e
P a r t i c u l a t e A i r F i l t e r s
App l i c a t i o n s
ALF 114
• Prüfung von Allgemeinen Luftfiltern nach EN 779 und ASHRAE 52.2 (MERV-Klassifizierung)
• Universal-Filterhalter für Taschen- und Kassettenfilter, Filterkartuschen und flache Medien
• Klassifizierung von Grob- und Feinstaubfiltern
• Software zur Energieeffizienz-Einstufung nach EUROVENT
• Bedienerfreundlich durch verschiebbare und drehbare Prüfkanalsegmente
• Tests of particulate air filters for general ventilation according to EN 779 and ASHRAE 52.2 (MERV rating)
• Universal filter holding system for pocket and cassette filters, filter cartridges and flat media
• Classifying of coarse dust filters and fine particle filters
• Software for EUROVENT energy rating
• Easy to handle due to rotatable and movable duct sections
8
FilterprüfanlagenKFZ - L u f t f i l t e r
Prüfung von Filterelementen auf - Differenzdruck - Staubspeicherfähigkeit - Fraktionsabscheidegrad
Automatisierte Prüfabläufe mit PC und nutzerfreundlicher Steuersoftware
Anschauliche Datenpräsentation
Test of filter elements regarding: - differential pressure characteristics - dust holding capacity - fractional efficiency
Automated testing procedures using PC and user-friendly control software
Clear data presentation
A l l g eme i n Gene ra l
PAF
• Prüfung von KFZ-Innenraumfiltern nach DIN 71460 (ISO 11155) hinsichtlich Abscheidung staubförmiger und gasförmiger Stoffe
• Modularer Aufbau
• Auch für Flächenware einsetzbar
• Tests of cabin air filters according to DIN 71460 (ISO 11155) for separation of dust and gaseous elements
• Modular construction
• Tests of planar filter materials possible
9
Filter Test Systems
Qualitätsprüfung
Forschungsaufgaben an Filterelementen
Quality testing
Research projects for filter elements
E i n s a t zgeb i e t e
Au t omo t i v e A i r F i l t e r s
App l i c a t i o n s
ABP 115
• Prüfung von Industrie- und Motorluftfiltern nach ISO 5011
• Massenstromregelung der Staubdispergierung
• Zusatzoption:
Wassereindüsung und Wasserabscheider zur qualitativen Beurteilung des Abscheiderverhaltens bei Beaufschlagung mit Wassertröpfchen
• Hoher Automatisierungsgrad
• Tests of inlet air cleaners and motor intake filters according to ISO 5011
• Mass flow control of dust dosing
• Additional option:
Water injection system and water separator to evaluate the separator behaviour at water spray loading
• High level of automation
10
SPT 140
• Prüfung von Ölnebelabscheidern hinsichtlich Druckverlust, gravimetrischem Abscheidegrad, Fraktionsabscheidegrad und Druckregelverhalten
• Zur Optimierung von Kurbelgehäuseentlüftungssystemen
• Gewährleistung praxisnaher Prüfbedingungen durch geregelte Beheizung der relevanten Komponenten
• Tests of oil mist separators regarding pressure drop, gravimetric filtration efficiency, fractional efficiency and pressure control characteristics
• For optimisation of crankcase ventilation systems
• Ensuring application-oriented conditions due to controlled heating of the relevant components
Prüfungen hinsichtlich gravimetrischem Abscheidegrad und weiteren wesentlichen Kenngrößen
Automatisierte Prüfabläufe mit PC und nutzerfreundlicher Steuersoftware
Anschauliche Datenpräsentation
Filterprüfanlagen
Test of filter elements regarding differential pressure characteristics as well as further essential parameters
Automated testing procedures using PC and user-friendly control software
Clear data presentation
A l l g eme i n Gene ra l
Ö l n ebe l ab s c he i de r
GMS 141
• Absolutfiltereinheit zur Prüfung des gravimetrischen Abscheidegrades von Ölabscheidern für Verbrennungsmotoren
• Benutzung von Filterpatronen oder planen Filtermedien
• Beheizter Absolutfilterhalter zur Vermeidung von Kondensation
• Nur geringer Zeitaufwand erforderlich
• Absolute filter unit for measurement of gravimetric filtration efficiency of oil mist separators for combustion engines
• Use of filter cartridges or flat sheet filter media
• Heatable absolute filter box in order to avoid condensation
• Only little time required
11
Filter Test Systems
Prüfung von Ölnebelabscheidern
Entwicklungs- und Forschungsaufgaben an Ölnebelabscheidern und Verbrennungsmotoren
Testing of oil mist separators
Development and research projects for oil mist separators and combustion engines
E i n s a t zgeb i e t e
O i l M i s t S epa ra t o r s
App l i c a t i o n s
BBT 143
• Prüfstand zur sehr zeitsparenden on-line Bestimmung des Ölgehaltes im Blow-By-Gas in einem großen Konzentrationsbereich
• Konditionierung der Messkammern des GMS 141 und des PAP 610
• Geeignet für den Einsatz am Labor-, Motoren- und Schwenkprüfstand
• Steuerungstechnische Anbindung an Motorenprüfstände möglich
• Test rig for very timesaving on-line determination of the oil content in blow-by aerosols in a wide concentration range
• Conditioning of the measuring chambers of GMS 141 and PAP 610
• Suitable for the use at laboratory, engine and tilt test stands
• Control connection to engine test stands possible
12
Filterprüfanlagen
Untersuchungen an Filtermedien
AFC 131
• Prüfstand für Luftfiltermedien nach VDI 3926 Blatt 1, Ausführung 2, und Luftfilterelemente
• Untersuchung von Filtermedien hinsichtlich Differenzdruckverhalten, gravimetrischem Abscheidegrad und Staubbeladungskapazität
• Tests bei verschiedenen Filteranströmgeschwindigkeiten, weiter Volumenstrombereich
• Viele Optionen für applikationsspezifische Anpassung
• Sehr flexible Integrationsfähigkeit unterschiedlicher Partikelmesstechnik
• Test rig for air filter media acc. to VDI 3926 Part 1, Version 2, and air filter elements
• Analysis of filter media detailing differential pressure characteristics, arrestance and dust holding capacity
• Testing at arbitrary face velocities, wide range of flow rate
• Many options for application-specific modification
• Very flexible integration capability of different particle measuring devices
A l l g eme i n
F i l t e r med i e n
Gene ra l
Characterization of filter media
AFC 133
• Prüfstand für abreinigbare Luftfiltermedien nach ISO 11057 (und VDI 3926 Blatt 1, Ausführung 1)
• Untersuchung von Filtermedien hinsichtlich Differenzdruckverhalten, gravimetrischem Abscheidegrad und Staubbeladungskapazität
• Tests bei verschiedenen Filteranström- geschwindigkeiten
• Test rig for cleanable air filter media acc. to ISO 11057 (and VDI 3926 Part 1, Version 1)
• Analysis of filter media detailing differential pressure characteristics, arrestance and dust holding capacity
• Testing at arbitrary face velocities
13
Filter Test SystemsF i l t e r Med i a
Entwicklung von Filtermaterialien
Qualitätsprüfung
E i n sa t zgeb i e t e App l i c a t i o n s
MBP 116
• Bestaubungsprüfstand zur Qualitäts- prüfung planer Filtermedien
• Zeitsparende, reproduzierbare Prüfung von gravimetrischem Abscheidegrad, Druckverlust und Staubspeichervermögen
• Einfacher, robuster Aufbau und kostengünstige manuelle Bedienung
• Dust loading test rig for quality testing of flat sheet filter media
• Efficient, reliable testing of differential pressure, arrestance and dust holding capacity
• Simple robust design, cost-saving manual operation
PSM 165
• Porengrößenmessung zur strukturellen Charakterisierung von Filtermedien
• Ermittlung von Bubble Point, Porengrößen- verteilung, Mean Flow Pore Size und Gas-Permeabilität
• Adapter für unterschiedliche Proben- abmessungen und Materialien
• Pore size measurements for structural characterization of filter media
• Determination of bubble point, pore size distribution, mean flow pore size and gas-permeability
• Adapters for different sample dimensions and materials
Development and design of filter media
Quality testing
14
Clean Room Equipment
Geräte und Software für Prüf- und Abnahmemessungen sowie zur Über- wachung reinraumtechnischer Anlagen
Erzeugung, Verdünnung und Verteilung von Prüfaerosolen sowie Probenahme und Partikelmessung
Instruments and software for testing, acceptance control, monitoring of clean room facilities and clean room validation
Generation, dilution and distribution of test aerosols, also sampling and particle size measurement
A l l g eme i n Gene ra l
DIL 554
• Aerosolverdünnungssystem
• Stabiles, zertifiziertes Verdünnungsverhältnis von 1:100 bei 28,3 l/min bzw. 56,6 l/min
• Ständige optische Kontrolle des Probenvolumenstromes
• Aerosol dilution system
• Steady, certified dilution ratio of 1:100 at 28.3 l/min and 56.6 l/min respectively
• Permanent optical monitoring of the sample flow rate
ATM 226
• Aerosolgenerator für stabiles poly-disperses Aerosol im Bereich der MPPS von Schwebstofffiltern
• Einstellbare Partikelproduktionsrate
• Aerosol Generator of high stability polydisperse aerosols in the size range of the most penetrating particle size (MPPS) for suspended matter filters
• Adjustable particle production rate
ADD 536
• Aerosolverteil- und -verdünnungssystem entsprechend der Normen: SWKI Richtlinie 99-3 und DIN 1946-4
• Ständiges Monitoring der Quellstärke (Partikel/Zeit)
• Verdünnung anpassbar an eingesetzten Partikelzähler
• Aerosol distribution and dilution systems according to standards SWKI guideline 99-3 and DIN 1946-4
• Permanent monitoring of the source values (particles/time)
• Adjustable dilution ratios to suit the specification of the particle counter
15
SYS 529
• Probenahmesonde gemäß EN ISO 14644-3
• Exaktes Scannen bis in die Filterecken
• Genaue Probenahme sowie kurze Scan-Zeiten
• Sampling probe design according to EN ISO 14644-3
• Precise scanning at the edges of a filter element
• Accurate sampling and short scanning times
Abnahmemessungen in verschiedenen Branchen z. B.: Pharmazie, Halbleiterherstellung, Krankenhäuser, Luft- und Raumfahrt, Lebensmittelindustrie
Validation and acceptance control for use in various industries, including: Pharmaceutical, semiconductor, medical, the aerospace industry and food industry
E i n s a t zgeb i e t e
App l i c a t i o n s
Clean Room Equipment
CRQWin
• Validierungssoftware für reinraumtechnische Anlagen und Sicherheitswerkbänke
• Datenerfassung und Protokollerstellung entsprechend reinraumtechnischer Normen
• Validation software for clean room facilities and safety cabinets
• Data acquisition and report generation according to clean room standards
OPQWin
• Schutzgradmessung von OP-Räumen entsprechend der Normen DIN 1946-4 und SWKI Richtlinie 99-3
• Protection factor measurement of operation rooms in hospitals according to standards DIN 1946-4 and SWKI guideline 99-3
LAP 340
• Partikelzähler mit Partikelgrößen- Messbereich 0,3 bis 10 µm
• Anzahlkonzentrationsbereich bis 980000 Partikel/ft³ (35 Partikel/cm³)
• Anschlussmöglichkeit für Klima- sensoren und Datenübertragung
• Particle counter with measuring range 0.3 to 10 µm
• Particle concentration up to 980,000 Particles/ft³ (35 Particles/cm³)
• Connection for climate sensors and data transfer
16
LAP 322
• Partikelgrößenspektrometer für Aerosole
• Hohe Auflösung
• Gute Klassiergenauigkeit
• Weiter Konzentrationsmessbereich
• Kompakte Bauform
• Particle size spectrometer for aerosols
• High resolution
• High classification accuracy
• Wide concentration measuring range
• Compact design
FAS 362
• Partikelzähler für Flüssigkeiten
• Flexibel einsetzbares Probenzufuhrgerät
• Weiter Konzentrationsmessbereich
• Geringe Abhängigkeit vom Partikelmaterial
• Particle counter for fluids
• Flexible sample feed unit
• Wide concentration measuring range
• Measuring results almost independent from particle material
Partikelmessung
Ermittlung der Partikelgrößenverteilung und Partikelanzahlkonzentration
Optische Messmethoden
Optimierte optische Lösungen
Nutzerfreundliche Software
Determination of particle size distribution and number concentration
Optical measurement method
Optimized optical solutions
User-friendly software
A l l g eme i n Gene ra l
PAM 510
• Prozess-Aerosolmonitor zur in-situ-Messung
• Gleichzeitige Bestimmung von mittlerer Partikelgröße und Partikelkonzentration
• Weiter Messbereich
• Process Aerosol Monitor for in situ measurements
• Simultaneous determination of mean particle size and particle concentration
• Wide concentration range
17
Messung von Partikelgrößenverteilungen
Messung von Umwelt- und pharmazeutischen Aerosolen
Fraktionsabscheidegradmessung an Filtern und Abscheidern
Monitoring und Qualitätsüberwachung von Prozessen
Messung von Blow-By Aerosolen
Particle size measurement
Measurement of environmental and pharmaceutical aerosols
Fractional efficiency measurement for filters and separators
Monitoring of processes for quality control
Measurement of blow-by aerosols
E i n s a t zgeb i e t e App l i c a t i o n s
Particle Measurement
PMP 694
• Inline- oder Bypass-Partikelmessungen unter Prozessbedingungen in fließenden, transparenten Kunststoffschmelzen
• Frei festlegbare Signal-Schwellwerte
• Besonders geeignet zur Reinheits-kontrolle an Extrudern und Kunst-stoffmaschinen
• In-line or by-pass particle measure-ments under process conditions in flowing transparent plastic melts
• Selectable signal thresholds
• Designed for material purity monitoring in extruders and plastics machines
PAP 610
• Prozess-Aerosolphotometer zur in-situ-Konzentrationsmessung von Blow-By Aerosolen
• Zusätzliche Partikelgrößen- informationen durch zwei Wellenlängen
• Keine Kondensation und Fensterverschmutzung
• Process-Aerosol Photometer for in situ concentration measurement of blow-by aerosols
• Additional particle size information using two measurement wavelengths
• No condensation effects and no window contamination
PAP 612
• Kombiniertes in-line Extinktions-Streulichtphotometer mit doppelt ausgeführten Messstrecken und zwei Wellenlängen, zur Charakterisierung von Blow-By Aerosolen
• Detektion von Flüssigkeiten in Rohr-systemen für den Gastransport (z. B. Schwallöll- , Wandfilm- oder Kondensaterkennung)
• Combined in-line extinction and scattered-light photometer with double-running test sections and two wavelengths for characterisation of blow-by aerosols
• Detection of fluids in pipe systems for gas transport (e.g. gushes of oil, wall film or condensation)
18
Erzeugung von polydispersen Testaerosolen mit definierten Eigenschaften entsprechend der VDI-Richtlinien 3491 und 2083 sowie nach FDA-Guidelines
Sehr gute Konstanz der generierten Partikelgrößenverteilung
Konzentration wird über Vordruck und damit Gesamtvolumenstrom reguliert, deshalb höchste Konzentrationsstabilität
Hohe Reproduzierbarkeit
Definierte Partikelanzahlkonzentration
ATM 210, ATM 210/H
• Aerosolgenerierung gegen Überdruck bis zu 10 bar
• Aerosol generation into pressurised vessels up to 10 bar
ATM 220 with
Diffusion Dryer DDU 570
• Einfaches und überschaubares Design
• Besonders geeignet für Laborbetrieb und für Salzaerosole
• Leichter Tausch des Trockenmittels (Silicagel)
• Vielseitig einsetzbar
• Simple and straightforward design
• Particularly suitable for laboratories and for salt aerosols
• Easy changing of the drying agent (Silica gel)
• Versatile
AerosolerzeugungA tom i ze r Ae r o so l g ene ra t o r e n
Generation of polydisperse test aerosols with known properties according to VDI 3491 and 2083 as well as FDA guidelines
Constant particle size distribution
Concentration is adjusted by primary pressure and consequently the total flow rate, which results in very high stability of concentration
High reproducibility
Defined particle number concentration
A l l g eme i n Gene ra l
19
Aerosol Generation
Prüfung der Qualität von Schwebstofffiltern
Funktionstests an Sicherheitswerkbänken
Abnahmemessungen in Reinen Räumen
Kalibrierung von Messgeräten
Sichtbarmachen von Strömungen
Quality tests of filters for suspended matters
Function tests of laminar flow boxes
Acceptance measurements in clean rooms
Calibration of measuring devices
Flow visualisation
ATM 226
• Interne Drucklufterzeugung
• Kompaktes Edelstahlgehäuse
• Direkter Netzanschluss mit integriertem Weitspannungsnetzteil
• Internal generation of compressed air
• Compact stainless steel housing
• Connection directly to mains supply
by integrated mains adapter
ATM 230
• Druckluftbetriebenes System
• Hohe Konzentration
• Geeignet zur Erzeugung von Tracerpartikeln
• Durch Entfernung des Prall- abscheiders Generierung größerer Partikel
• System operated with compressed air
• High concentration
• Suitable for generation of tracer particles
• Generation of larger particles by removing the baffle plate
ATM 241
• Sehr hoher Aerosol-Output
• Großer Konzentrationsbereich durch selektive Düsenauswahl
• Sehr lange Betriebszeiten
• Very high aerosol output
• Broad range of concentration by selective choice of nozzles
• Very long operation periods
E i n s a t zgeb i e t e App l i c a t i o n s
A t om i ze r Ae r o so l Gene ra t o r s
20
Zur Erzeugung polydisperser Tröpfchenaerosole
Besonders hoher Aerosol-Output
ATM 243
• Bevorzugt zur Prüfung von Ölnebelabscheidern
• Einstellbare Aerosoltemperatur bis 130 °C
• Sehr hohe Aerosolkonzentration und großer Partikelmassenstrom
• Ideal for testing of oil mist separators
• Adjustable aerosol temperature up to 130°C
• Very high aerosol particle concentration and particle mass flow
Generation of polydisperse droplet aerosols
Very high aerosol output
Prüfung von Abscheidern
Sichtbarmachen von Strömungen
Testing of separators
Flow visualisation
LDG 244
• Zur Erzeugung von Öltröpfchen mit sehr großem Durchmesser (50 - 100 µm)
• Sehr große Ölmengen dosierbar
• Generation of oil droplets with a very large diameter (50 - 100 µm)
• Very large and easy to dose oil quantities
A l l g eme i n
Gene ra l
E i n s a t zgeb i e t e
App l i c a t i o n s
AerosolerzeugungSpez i e l l e Ae r o so l g ene ra t o r e n
21
SLG 250
• Monodisperses Aerosol
• Einstellbare Partikelgröße
• Monodisperse aerosol
• Adjustable particle size
SLG 270
• Monodisperses Aerosol
• Einstellbare Partikelgröße
• Erzeugung großer Partikel durch patentierte Screen-Bypass-Einheit möglich
• Monodisperse aerosol
• Adjustable particle size
• Generation of large particles possible by patented screen-bypass-unit
Aerosol GenerationSpec i a l Ae r o so l Gene ra t o r s
Zur Erzeugung monodisperser Aerosole mit einstellbarer Partikelgröße
Sehr schnelle Einstellung der gewünschten Partikelgröße Hohe Partikelanzahlkonzentration bei hoher Konstanz Patentiertes Gerätekonzept
Generation of monodisperse aerosols with adjustable particle size
Very rapid adjustment of desired particle size High particle number concentration at high constancy Patented concept
Kalibrierung von Partikelmessgeräten Aerosolforschung Bestimmung von Abscheidegraden Inhalationsversuche Erzeugung von Tracerpartikeln
Calibration of particle measuring instruments Aerosol research Determination of separation efficiencies Inhalation studies Generation of tracer particles
A l l g eme i n
Gene ra l
E i n s a t zgeb i e t e
App l i c a t i o n s
22
SAG 410/U
• Einfacher Wechsel des Dosierbereiches
• Neuartige, patentierte Dosiervorrichtung
• Sehr geringe Mengen dosierbar
• Geeignet zur Dosierung und Dispergierung von Ruß und Aluminiumoxid (Pural)
• Easy to switch dosing range
• New patented dosing mechanism
• Possible to feed very low quantities of sample
• Suitable for dosing and dispersing soot and aluminium oxide
SAG 410, SAG 410/L
• Kontinuierlich arbeitendes Kompaktgerät
• Weiter Dosierbereich mit hoher Dosierkonstanz über lange Betriebszeiten
• Austauschbare Dosiermodule
• Komfortable Gerätesteuerung
• Continuous working principle
• Wide constant dosing range over long operational periods
• Exchangeable dosing units
• Easy device control
SAG 410/H
• Modifizierte Version des SAG 410 für wesentlich größere Dosiermengen
• Modified model of SAG 410 for substantially higher dosing volumes
AerosolerzeugungS t aubd i s pe r g i e r e r
Erzeugung eines Aerosols durch Über- führung eines pulverförmigen Feststoffes in den gasgetragenen Zustand (Staub)
Kontinuierliche Arbeitsweise
Genaue Feststoffdosierung und hohe Dosierkonstanz
Neuartige Dispergierdüse mit Konstruktions-keramik für extrem lange Standzeiten
Komfortable Geräteansteuerung
Flexibel einsetzbar und einfache Bedienung
Generation of aerosols by feeding a powder into a gas or air stream to form a particulate suspension
Continuous working principle
Highly accurate feed control with constant dosing of the powder
Novel structural ceramics design of the dispersing nozzle for long operational life
Easy device control
Flexible in use with ease of operation
A l l g eme i n Gene ra l
23
SAG 440
• EN 779 und ASHRAE 52.2-kompatibles Gerät
• Sehr genaue Dosierung durch Schrittmotortechnologie
• Einsatz faserhaltiger Materialien möglich
• Kontinuierlicher Betrieb
• Device in accordance with standards EN 779 and ASHRAE 52.2
• Highly accurate dosing with use of stepping motor technology
• Suitable for use with dusts containing linters
• Continuous operation
Du s t D i s pe r s e r
Anwendungen, für die luftgetragene Feststoffpartikel benötigt werden (z. B. Prüfen der Abscheideleistung von Filtern)
Definierte Beladung von Filtern
Sichtbarmachen von Strömungen
Untersuchungen zu Beschichtungs- und Mischprozessen
Applications requiring solid particulate suspension in air or gas (e.g. separation efficiency of filters)
Defined dust loading of filters
Flow visualisation
Analysis of coating and mixing processes
E i n s a t zgeb i e t e App l i c a t i o n s
Aerosol Generation
SAG 420
• Besonders geeignet für Staubbeladungs-prüfungen nach ISO 5011
• Innovative Dosier- und Antriebstechnologie
• Sehr genaue Massenstromregelung durch Nutzung einer Waagenoption
• Particularly suitable for dust loading capacity tests according to ISO 5011
• Innovative dosing and drive technology
• Accurate mass flow control with weigh scale option
24
DIL 550
• Festes Verdünnungsverhältnis und entsprechender Volumenstrom
• Verschiedene Geräteversionen
• Höhere Verdünnungsfaktoren durch Kaskadierung mehrerer Geräte
• Keine Hilfs- bzw. Abluft
• Fixed dilution ratio and corresponding volume flow
• Various model versions
• Extended dilution ratios by cascading several devices
• No auxiliary air flow and no exhaust air
DIL 554
• Festes Verdünnungsverhältnis 1:100
• Geräteversionen: für Volumenstrom des Partikelzählers 1 cf/min oder 2 cf/min
• Mobile Nutzung durch Batteriebetrieb
• Geringer Druckverlust
• Gute Reinraumtauglichkeit durch kompaktes Edelstahlgehäuse
• Fixed dilution ratio 1:100
• Model versions: for volume flow of particle counter 1 cf/min or 2 cf/min
• Mobile use with battery operation
• Low pressure loss
• Recommended for use in clean rooms because of stainless steel housing
Aerosol AccessoriesVe rdünnung s s y s t eme
Konstante und reproduzierbare Verdünnung eines Aerosols
Permanente Überwachung des Verdünnungs-verhältnisses mittels Anzeige
Anpassung an kundenspezifische Volumen-ströme oder Verdünnungsverhältnisse möglich
Hohe Standzeit und Zuverlässigkeit
Constant and reproducible dilution of aerosols
Permanent monitoring of the dilution ratio by means of a display facility
Adaptable to customized volume flows or dilution ratios
Long life and highly reliability
A l l g eme i n Gene ra l
DIL 540
• Kein manueller Abgleich erforderlich
• Festes Verdünnungsverhältnis und entsprechender Volumenstrom
• Höhere Verdünnungsfaktoren durch Kaskadierung mehrerer Geräte
• Keine Hilfs- bzw. Abluft
• No manual re-adjustment required
• Fixed dilution ratio and corresponding volume flow
• Extended dilution ratios by cascading several devices
• No auxiliary air flow and no exhaust air
25
DDS 560
• Einstellbares Verdünnungsverhältnis
• Anzeige des eingestellten Verdünnungsfaktors und des aktuellen Volumenstromes
• Geeignet für Partikelzähler mit Volumenströmen 0,5 bis 3 l/min
• Adjustable dilution ratio
• Screen display for data showing adjusted dilution ratio and current volume flow
• For use with Particle counters with a volume flow of 0.5 to 3 l/min
HDS 561
• Sehr hohe einstufige Verdünnung (bis 1:100 000)
• Aktive Verdünnung, damit praktisch kein Druckverlust
• Für unterschiedliche Volumenströme geeignet (bis 100 l/min)
• Very high single-stage dilution (up to 1:100 000)
• Very low pressure loss because of active dilution
• Recommended for different volume flows (up to 100 l/min)
D i l u t i o n S y s t em s
Messung von hochkonzentrierten Aerosolen
Bestimmung von Abscheidegraden an Filtern
Aerosolforschung
Abnahmemessungen von Reinräumen und Sicherheitswerkbänken
Measurement of highly concentrated aerosols
Determination of separation efficiency of filters
Aerosol research
Acceptance control of clean rooms and safety cabinets
E i n s a t zgeb i e t e App l i c a t i o n s
Aerosol Accessories
26
DDU 570
• Diffusionstrockner zur Trocknung von wasserhaltigen Aerosolen
• Minimaler Partikelverlust
• Diffusion dryer for drying of aqueous aerosols
• Very low particle loss
EAN 581
• Elektrostatische Aerosol- neutralisation durch kon-trollierte Ionenerzeugung
• Separate Einstellung der positiven und negativen Ladungsträger
• Keine radioaktive Quelle
• Electrostatic aerosol neu-tralisation with controllable generation of ions
• Separate adjustment of both positive and negative source of ions
• No radioactive source
Aerosol Accessories
Geräte zur Probenahme und Proben- aufbereitung (Verdünnung, Trocknung und Neutralisation von Prüfaerosolen)
Equipment for sampling and sample conditioning (dilution, drying and neutralisation of test aerosols)
Bestimmung von Abscheidegraden
Messung von hochkonzentrierten Aerosolen
Aerosolforschung
Determination of filtration efficiency
Measurement of highly concentrated aerosols
Aerosol research
A l l g eme i n
Gene ra l
E i n s a t zgeb i e t e
App l i c a t i o n s
SYS 525
• Probenahmesystem für Parti-kelmessungen an Druckgas-leitungen (bis 8 bar)
• Isokinetische und isoaxiale Probenahme
• Gerätedisplay für Über-wachung und Nach- regelung der Isokinetik
• Sampling unit for particle measurements at pressure gas lines (up to 8 bar)
• Isokinetic and isoaxial sampling
• Device display for monitoring and re-adjusting of isokinetics
SYS 520
• Gerät zum Umschalten zur Probename an verschiedenen Messstellen
• Durch Spülroutine keine Verfälschung von Proben
• Messsicherheit durch Schlauchquetschventile
• Instrument for switching between different sampling points
• Purging routine prevents sample falsification
• High reliability with hose compression valves
27
Software
Wei t e r e E i n s a t zgeb i e t e
Komfortable Steuerung von Topas-Geräten und -Prüfständen mittels Visualisierung
Automatisierte Datenerfassung und -auswertung
Modulare Struktur
Einfache, kundenspezifische Protokollierung und Auswertung von Messergebnissen
Unkomplizierter Datenexport zur Weiterverarbeitung von Messergebnissen
Automatische Auswertung, Berechnung von Ergebnissen nach entsprechenden Normen
Dreisprachig verfügbar: deutsch, englisch, französisch
Convenient control of Topas devices and test rigs by man machine interface
Automated data acquisition and evaluation
Modular design
Easy to use with customized logging and evaluation of measured results
Simple data export for future processing of acquired data
Automated evaluation, calculation of results in-line with industry standards
Trilingual available: German, English and French
• Komplexe Steuer- und Auswertesoftware für Filterprüfstände
• Spezifische Versionen für unterschiedliche Prüfstände und Prüfaufgaben
• Automatische und kundenspezifische Berechnungen und Auswertung entsprechend der anzuwendenden Normen
• Complex control and data acquisition software for filter test rigs
• Several versions for different test rigs and test procedures
• Automated and customized calculations and analysis according to respective standards
PASWin zur Partikelmessung in Gasen und Flüssigkeiten, z. B. mit den Laser-Aerosolmessgeräten LAP und dem Flüssigkeitspartikelzähler FAS
CRQWin zur Partikelmessung und Datenaufbereitung entsprechend reinraumtechnischer Normen
OPQWin zur Schutzgradmessung von OP-Räumen
PSMWin zur Bestimmung von Porenkenngrößen mit dem Porengrößenmessgerät PSM
PMPWin zur Partikelmessung in Kunststoffschmelzen mit dem Partikelsensor für Polymerschmelzen PMP
USSWin zur Korngrößenbestimmung von Schleifmitteln mit dem Automatischen US-Sedimentometer USS 791
PASWin for particle measurement in gases and liquids, e.g. using the Laser Aerosol Particle Size Instruments LAP or the Particle Counter for Liquids, FAS
CRQWin for particle measurement and data evaluation in accordance with clean-room standards
OPQWin for protection factor measurements of operating theatres
PSMWin for determination of pore size characteristics using the Pore Size Meter PSM
PMPWin for particle measurement in plastic melts using the Polymer Melt Particle Sensor PMP
USSWin for determination of the particle size distribution of abrasives with the Automated US-Sedimentometer USS 791
PAFWin
A l l g eme i n Gene ra l
F u r t h e r App l i c a t i o n s
28
3M
AAF- American Air Filter Manufacturing Sdn. Bhd. Adam Opel AGAGM OTOMOTIV SAN TIC A.S. Air FiltersArgo-Hytos GmbH Atlas Copco
BASF AGBayer AGBernard DumasBMWBoehringer IngelheimBorealis Polyolefine GmbHBridgestone CorporationBundesamt für Materialforschung und -prüfung
Camfil KGCaterpillarCaverion Deutschland GmbHChina Shipbuilding Industry CorporationClarkson UniversityClean & Science Co. Ltd.Cummins Inc.
Daimler AG DMT GmbH & Co. KG Donaldson Company Inc. Drägerwerk AG & Co. KGaA Dyson Manufacturing S/B
Eswegee Vliesstoff GmbHEvonik Degussa GmbH
Felix Schoeller Holding GmbH & Co. KG FH Amberg FH Berlin F. Hoffmann-La Roche AG Filtrauto Ford Motor Company Forschungszentrum Jülich Fraunhofer Gesellschaft Freudenberg & Co. KG Funcate, Brasilien
G.Bruss GmbH & Co. KGGKD - Gebr. Kufferath AGGlaxoSmithKline GmbH & Co. KGGNS Automotive Co., Ltd.
Haver & Boecker OHG Hawker France S.A.
Helmholtz Zentrum München Hengst GmbH & Co. KG Herding GmbH Hollingsworth and Vose HS-Luftfilterbau GmbH
IQAirInfineon Technologies AGInstitut für Luft- und Kältetechnik gGmbHInternormen Technology GmbHInzi ControlsIrema Filter GmbHInstitut für Energie- und Umwelttechnik e.V., IUTA
Jack Filter Produktions GmbHJapan Tobacco Inc.Japan Vilene Co. Ltd.Jasun Envirocare PLCJunker Filter GmbH
Keller Lufttechnik GmbH und Co. KGKIT Karlsruher Institut für TechnologieKITECH Kolon Industries KoreaKorea Vilene Co. Ltd.
Leibniz Institut für Polymerforschung Dresden e.V.
Mahle GmbH MAN Truck und Bus AG Mann+Hummel GmbH Merck KGaA Miele & Cie. KG Mikropor A.S. Misfat Filtration M+W Zander
Nifco Inc. Norafin Industries GmbH Northern Technical L.L.C.
Parker Hannifin Corp.Paul Scherrer InstitutPhilip Morris Research Laboratories GmbHPhilipsPhysikalisch-Technische BundesanstaltPolytec Group
Rhodia Riensch & Held GmbH & Co. KGRieter Automatik GmbHRobert Bosch GmbHRWTH Aachen
Sandler AG Sartorius AG Schweizer Bundesamt für Metrologie Seung Chang Airtek Inc. Shijiazhuang Ghentai Filter Paper Co. Ltd. Siemens AG Skan AG SLG Prüf- und Zertifizierungs GmbH Sofrance Sächsisches Landesamt für Umwelt, Landwirtschaft und Geologie STFI Sächsisches Textilforschungsinstitut e.V.
Testo AG Thermo Fisher Scientific Inc. Tianjin University TSE Systems GmbH TSI Incorporated TU Berlin TU Clausthal TU Delft TU Dortmund TU Dresden TU Kaiserslautern TU München TU Wien TÜV Süd AG
Umweltbundesamt Universität StuttgartUniversität BayreuthUniversität Erlangen-NürnbergUniversität WürzburgUniversity of HelsinkiUniversity of KuopioUniversity of Michigan
Vetter Pharma-Fertigung GmbH & Co. KGVirginia Commonwealth UniversityVorwerk & Co. KGVTT Technical Research Centre of Finland
W.H. MahlWacker Chemie AGWehrwissenschaftliches Institut für Schutztechnologien
Zarm - Universität Bremen
... and many more
© 2014 Topas GmbH
Topas GmbHTechnologie-orientierte
Partikel-, Analysen- und SensortechnikOskar Röder Str. 12 · D-01237 Dresden
Phone + 49 (351) 21 66 43 - 0Fax + 49 (351) 21 66 43 55E-mail office@topas-gmbh.deInternet www.topas-gmbh.de
References